Hyun Suk Jung

Perovskite solar cells based on organometal halide light absorbers have been considered a promising photovoltaic technology due to their superb power conversion efficiency (PCE) along with very low material costs. Since the first report on a long-term durable solid-state perovskite solar cell with a PCE of 9.7% in 2012, a PCE as high as 19.3% was demonstrated in 2014, and a certified PCE of 17.9% was shown in 2014. Such a high photovoltaic performance is attributed to optically high absorption c

We report annealing-free compact TiO_x layer by atomic layer deposition for high efficiency flexible perovskite solar cells, and maintained 95% of the initial PCE after 1000 bending cycles with 10 mm bending radius.

With rapid and brilliant progress in performance over recent years, perovskite solar cells have drawn increasing attention for portable power source applications.

Photoelectrochemical oxidation of water presents a pathway for sustainable production of hydrogen peroxide (H2O2). Two-electron water oxidation toward H2O2, however, competes with the popular four-electron process to form oxygen and one-electron water oxidation to form OH radical. To date, bismuth vanadate (BiVO4) has been shown to exhibit promising selectivity toward H2O2, especially under illumination, but it suffers from high overpotential and notoriously poor stability. Herein, using density

The two-electron water oxidation reaction (2e-WOR) is a promising route for distributed electrochemical synthesis of hydrogen peroxide (H2O2), an effective and green oxidizer, bleaching agent, and antiseptic. To date, the best electrocatalyst for 2e-WOR, in terms of selectivity against the competing 4e-WOR to form O2, is BiVO4. Nevertheless, BiVO4 is unstable and has a high overpotential of ∼340 mV at 0.2 mA/cm2 for 2e-WOR. Herein, we use density functional theory to identify a new, efficient, s

By employing the neutral plane concept, we demonstrated ultra-flexible perovskite solar cells that can withstand 100 cycles of crumpling.

Sol-gel-derived Mg(OH)(2) gel was coated onto TiO(2) nanoparticles, and the subsequent thermal topotactic decomposition of the gel formed a highly nanoporous MgO crystalline coating. The specific surface area of the electrode that was prepared from the core-shell-structured TiO(2) nanoparticles significantly increased compared with that of the uncoated TiO(2) electrode. The increase in the specific surface area of the MgO-coated TiO(2) electrode was attributed to the highly nanoporous MgO coatin

Photovoltaic technologies based on perovskite absorber materials have led this optoelectronic field into a brand-new horizon. However, the present antisolvents used in the one-step spin-coating method always encounter problems with the very narrow process window. Herein, anisole is introduced into the one-step spin-coating method, and the technology is developed to fabricate perovskite thin films with ultrawide processing window with a dimethylformamide (DMF):dimethyl sulfoxide (DMSO) ratio vary

In this paper, ZnO and Al-doped ZnO films were deposited using the electrospraying method and studied for the first time as photoanodes for efficient perovskite solar cells. Effects of substrate temperature, deposition time, applied voltage, substrate-to-nozzle distance and flow rate (droplet size) on the morphology of ZnO were studied with the help of FE-SEM images. The major factors such as the droplet size of the spray, substrate temperature and substrate-to-nozzle distance at deposition cont

TiO2 nanoparticle-based dye sensitized solar cells (DSSCs) have attracted a significant level of scientific and technological interest for their potential as economically viable photovoltaic devices. While DSSCs have multiple benefits such as material abundance, a short energy payback period, constant power output, and compatibility with flexible applications, there are still several challenges that hold back large scale commercialization. Critical factors determining the future of DSSCs involve

Perovskite solar cells (PSCs) are the most promising candidates as next-generation solar energy conversion systems. To design a highly efficient PSC, understanding electronic properties of mesoporous metal oxides is essential. Herein, we explore the effect of Nb doping of TiO2 on electronic structure and photovoltaic properties of PSCs. Light Nb doping (0.5 and 1.0 at %) increased the optical band gap slightly, but heavy doping (5.0 at %) distinctively decreased it. The relative Fermi level posi