Hokkaido University · 環境科学
Ilhwan Park教授の研究室は、レアメタルやレアアース元素の効率的回収に注力しており、主に金属鉱石の浮選・磁気選別・溶媒回収プロセスの最適化を目的としています。特に、銅・ニッケル・レアアース元素を含む廃棄物由来の二次資源からの回収技術の開発が中心であり、環境に配慮した持続可能なリサイクルプロセスの確立を目指しています。
Figures are computed from collected data and may differ slightly.
Flotation is a common mineral processing method used to upgrade copper sulfide ores; in this method, copper sulfide mineral particles are concentrated in froth, and associated gangue minerals are separated as tailings. However, a significant amount of copper is lost into tailings during the processing; therefore, tailings can be considered secondary resources or future deposits of copper. Particle–bubble collision efficiency and particle–bubble aggregate stability determines the recovery of targ
Nickel metal hydride (NiMH) batteries are extensively used in the manufacturing of portable electronic devices as well as electric vehicles due to their specific properties including high energy density, precise volume, resistance to overcharge, etc. These NiMH batteries contain significant amounts of rare earth metals (REMs) along with Co and Ni which are discarded due to illegal dumping and improper recycling practices. In view of their strategic, economic, and industrial importance, and to mi
The global demand for rare earth elements (REEs) is expected to increase significantly because of their importance in renewable energy and clean storage technologies, which are critical for drastic carbon dioxide emission reduction to achieve a carbon-neutral society. REE ore deposits around the world are scarce and those that have been identified but remain unexploited need to be developed to supply future demands. In this study, the Khalzan Buregtei deposit located in western Mongolia was stud
Non-availability of rich primary resources of rare earth metals (REMs) and the generation of huge amounts of discarded magnets containing REMs, compelled the researchers to explore the possibilities for the recovery of REMs from discarded magnets. Therefore, the present paper reports the recovery of REMs (Nd, Pr, and Dy) from discarded Nd-Fe-B magnets. The process consists of demagnetization, pre-treatment, and hydrometallurgical processing to recover REMs as salt. Leaching studies indicate that
The use of thiosulfate to extract gold from refractory ores is promising because of its non-toxicity and high selectivity. Sulfide minerals (i.e., pyrite, arsenopyrite, chalcopyrite), major gold carriers in refractory gold ores, however, hinder gold extraction due to the high consumption of a lixiviant. In this study, a new method to improve gold extraction from sulfide bearing gold ores is proposed based on the model experiments using a mixture of gold powder and arsenopyrite-bearing sulfide (H
Carrier flotation is a technique that can recover fine particles by using coarse carrier particles during the flotation process. In heterogeneous carrier flotation, coarse mineral particles of different minerals are used as carriers to recover fine mineral particles. By using Cu2+-treated pyrite particles as carriers, fine chalcopyrite particles recovery could be improved. However, a disadvantage of this heterogeneous carrier flotation is that it requires a post-flotation separation process to i
Metals are a finite resource that are necessary to maintain living standards in modern society, due to their countless applications, such as transportation vehicles, building and construction, household appliances, electronic devices, etc. [...]
The demand for rare earth elements (REEs) is continuously increasing due to the important roles they play in low-carbon and green energy technologies. Unfortunately, the global REE reserves are limited and concentrated in only a few countries, so the reprocessing of alternative resources like tailings is of critical importance. This study investigated carrier magnetic separation using coarse magnetite particles as a carrier to recover finely ground monazite from tailings. The monazite and carrie
Open papers in the app to read, cite, and organize with AI.