名古屋大学 · 材料科学
江普教授の研究室は、2次元材料を用いた次世代エレクトロニクスの基盤技術を開発しています。特にモリブデンディチリドやタングステンディ硒化物といった2次元層状半導体を用いた薄膜トランジスタや thermoelectric 器具の開発が中心であり、大面積・柔軟性・伸縮性に優れた電子デバイスの実現を目指しています。電気的特性と機械的特性の両立を追求し、ウェアラブル機器やIoTデバイスに応用可能な新規材料・構造の創出を進めています。
Figures are computed from collected data and may differ slightly.
Molybdenum disulfide (MoS(2)) thin-film transistors were fabricated with ion gel gate dielectrics. These thin-film transistors exhibited excellent band transport with a low threshold voltage (<1 V), high mobility (12.5 cm(2)/(V·s)) and a high on/off current ratio (10(5)). Furthermore, the MoS(2) transistors exhibited remarkably high mechanical flexibility, and no degradation in the electrical characteristics was observed when they were significantly bent to a curvature radius of 0.75 mm. The sup
Abstract The rapid development of the concept of the “Internet of Things (IoT)” requires wearable devices with maintenance‐free batteries, and thermoelectric energy conversion based on large‐area flexible materials has attracted much attention. Among large‐area flexible materials, 2D materials, such as graphene and related materials, are promising for thermoelectric applications due to their excellent transport properties and large power factors. In this Review, both single‐crystalline and polyc
Complementary inverters constructed from large-area monolayers of WSe2 and MoS2 achieve excellent logic swings and yield an extremely high gain, large total noise margin, low power consumption, and good switching speed. Moreover, the WSe2 complementary-like inverters built on plastic substrates exhibit high mechanical stability. The results provide a path toward large-area flexible electronics.
Reducing the dimensions of materials is one of the key approaches to discovering novel optical phenomena. The recent emergence of 2D transition metal dichalcogenides (TMDCs) has provided a promising platform for exploring new optoelectronic device applications, with their tunable electronic properties, structural controllability, and unique spin valley-coupled systems. This progress report provides an overview of recent advances in TMDC-based light-emitting devices discussed from several aspects
We fabricated stretchable molybdenum disulfide thin-film transistors (MoS2 TFTs) on poly(dimethylsiloxane) substrates using ion gels as elastic gate dielectrics. The TFTs exhibited an electron mobility of 1.40 cm2/(V·s) and an on/off current ratio of 104 with a notably low threshold voltage (∼1 V). Furthermore, our MoS2 TFTs operated at a mechanical strain of 5% without significant degradation of their electrical properties. These results demonstrate the potential for using MoS2 films for stretc
The carrier-density-dependent conductance and thermoelectric properties of large-area $\mathrm{Mo}{\mathrm{S}}_{2}$ and $\mathrm{WS}{\mathrm{e}}_{2}$ monolayers are simultaneously investigated using the electrolyte gating method. The sign of the thermoelectric power changes across the transistor off-state in the ambipolar $\mathrm{WS}{\mathrm{e}}_{2}$ transistor as the majority carrier density switches from electron to hole. The thermopower and thermoelectric power factor of monolayer samples ar
Abstract Light‐emitting electrochemical cells (LECs) have emerged as some of the simplest light‐emitting devices. Indeed, numerous LECs have been produced using fluorescent polymers; however, initial LEC structures require a mixture of polymers and electrolytes, thus strictly limiting their applicability. In contrast, recent advances in device technologies and material synthesis have opened a route for LECs using nonpolymeric materials. This progress report focuses on current developments in the
The outstanding physical and chemical properties of two-dimensional materials, which include graphene and transition metal dichalcogenides, have allowed significant applications in next generation electronics. In particular, atomically thin molybdenum disulphide (MoS2) is attracting widespread attention because of its large bandgap, effective carrier mobility, and mechanical strength. In addition, recent developments in large-area high-quality sample preparation methods via chemical vapour depos
The light-emitting device is the primary device for current light sources. In principle, conventional light-emitting devices need heterostructures and/or intentional carrier doping to form a p-n junction. This junction formation is, however, very difficult to achieve for most emerging semiconductors, and the fabrication of light-emitting devices is invariably a significant challenge. This study proposes a versatile and simple approach to realize light-emitting devices. This proposed device requi
Abstract Atomically thin transition metal dichalcogenides (TMDCs) are attractive materials for future optoelectronic applications because of their excellent electrical, optical, and quantum (spin‐valley) properties. In particular, in‐plane heterostructures based on TMDC monolayers provide opportunities to directly modulate band structures and lattice strains by the spatial distribution of constituent elements, leading to efficient control of their carrier transport and recombination. However, it
Room-temperature chiral light sources whose optical helicity can be electrically switched are one of the most important devices for future optical quantum information processing. The emerging valley degree of freedom in monolayer semiconductors allows generation of chiral luminescence via valley polarization. However, relevant valley-polarized light-emitting diodes (LEDs) have only been achieved at low temperatures (typically below 80 K). Here, a room-temperature chiral LED with strained transit
The diverse series of transition metal dichalcogenide (TMDC) materials has been employed in various optoelectronic applications, such as photodetectors, light-emitting diodes, and lasers. Typically, the detection or emission range of optoelectronic devices is unique to the bandgap of the active material. Therefore, to improve the capability of these devices, extensive efforts have been devoted to tune the bandgap, such as gating, strain, and dielectric engineering. However, the controllability o
Emerging transition metal dichalcogenides (TMDCs) offer an attractive platform for investigating functional light-emitting devices, such as flexible devices, quantum and chiral devices, high-performance optical modulators, and ultralow threshold lasers. In these devices, the key operation is to control the light-emitting position, that is, the spatial position of the recombination zone to generate electroluminescence, which permits precise light guides/passes/confinement to ensure favorable devi
The ideal quantum confinement structure of monolayer semiconductors offers prominent optical modulation capabilities that are mediated by enhanced many-body interactions. Herein, we establish an electrolyte-gating method for tuning the luminescence properties that are in transition metal dichalcogenide (TMDC) monolayers. We fabricate electric double-layer capacitors on TMDC/graphite heterostructures to investigate electric-field- and carrier-density-dependent photoluminescence. The exciton peak
One-dimensional (1D) transition metal chalcogenides (TMCs) have recently attracted much attention because of their atomically thin, wire structures and superior conducting properties. These wires interact via van der Waals forces, aggregating into 1D crystals of different shapes with desired properties. However, relevant studies on their transport properties remain limited because of the lack of high-quality samples. Herein, we report the formation of a two-dimensional (2D) carrier gas in thin,
Open papers in the app to read, cite, and organize with AI.