Yonsei University · 工学
Professor Jong-Gwan Yook's research lab specializes in microwave and millimeter-wave engineering with a focus on non-invasive sensing, advanced antenna design, and electromagnetic compatibility. The lab develops innovative radar-based vital sign monitoring systems, fluidic sensors for biomedical applications, and compact, high-frequency packaging solutions for integrated circuits. Research also extends to anti-drone technologies using intentional electromagnetic interference and bio-inspired pressure sensing systems for wearable and smart sensing applications.
Figures are computed from collected data and may differ slightly.
A novel non-contact vital-sign sensing algorithm for use in cases of multiple subjects is proposed. The approach uses a 24 GHz frequency-modulated continuous-wave Doppler radar with the parametric spectral estimation method. Doppler processing and spectral estimation are concurrently implemented to detect vital signs from more than one subject, revealing excellent results. The parametric spectral estimation method is utilized to clearly identify multiple targets, making it possible to distinguis
Silicon micromachining has been used to demonstrate the possibility of building high performance microwave and millimeter-wave antennas. To suppress higher order substrate modes and increase the bandwidth of a patch antenna, silicon substrate has been used and material has been selectively removed under the patch area. In addition, the effect of etched grooves around a patch element has been studied for performance improvement, it has been shown that micromachined substrate structure can effecti
MIC and MMIC packages capable of good performance at frequencies as high as 60 GHz need to have small volume, low weight, microstrip and/or coplanar waveguide (CPW) compatibility and exhibit negligible electrical interference with the rest of the circuit. In order to acquire some of these characteristics, special provisions need to be made during circuit layout and design, resulting in high-density packages. The designed circuits have a large number of interconnects which are printed on electric
In this paper, a fluidic glucose sensor that is based on a complementary split-ring resonator (CSRR) is proposed for the microwave frequency region. The detection of glucose with different concentrations from 0 mg/dL to 400 mg/dL in a non-invasive manner is possible by introducing a fluidic system. The glucose concentration can be continuously monitored by tracking the transmission coefficient S 21 as a sensing parameter. The variation tendency in S 21 by the glucose concentration is analyzed wi
With the advancement of technology, Unmanned Aerial Vehicles (UAVs), also known as drones, are being used in numerous applications. However, the illegal use of UAVs, such as in terrorism and spycams, has also increased, which has led to active research on anti-drone methods. Various anti-drone methods have been proposed over time; however, the most representative method is to apply intentional electromagnetic interference to drones, especially to their sensor modules. In this paper, we review va
Inspired by the human somatosensory system, pressure applied to multiple pressure sensors is received in parallel and combined into a representative signal pattern, which is subsequently processed using machine learning. The pressure signals are combined using a wireless system, where each sensor is assigned a specific resonant frequency on the reflection coefficient (S<sub>11</sub> ) spectrum, and the applied pressure changes the magnitude of the S<sub>11</sub> pole with minimal frequency shift
This review paper focuses on radio-frequency (RF) biosensors for real-time and continuous glucose sensing reported in the literature, including our recent research. Diverse versions of glucose biosensors based on RF devices and circuits are briefly introduced, and their performances are compared. In addition, the limitations of the developed RF glucose biosensors are discussed. Finally, we present perspectives on state-of-art RF biosensing chips for point-of-care diagnosis and describe their fut
In this review, the advances in radio-frequency (RF) /microwave chemical gas sensors using conducting polymers are discussed. First, the introduction of various conducting polymers is described. Only polyaniline (PANi), polypyrrole (PPy) and poly(3,4-ethylenedioxythiophene) (PEDOT), which are mainly used for gas sensors in RF/microwave region, are focused in this review. Sensing mechanism of the three conducting polymers are presented. And the RF/microwave characteristics and RF/microwave applic
Open papers in the app to read, cite, and organize with AI.