Kyu‐Jin Cho

This article presents Exo-Glove Poly (EGP) II, a soft wearable robot for the hand with a glove that is completely constructed of polymer materials and that operates through tendon-driven actuation for use in spinal cord injury (SCI). EGP II can restore the ability to pinch and grasp any object for people with SCI in daily life. The design of the glove allows it to be compact and extends the range of hand sizes that can fit. A passive thumb structure was developed to oppose the thumb for improved

Nature demonstrates adaptive and extreme shape morphing via unique patterns of movement. Many of them have been explained by monolithic shape-changing mechanisms, such as chemical swelling, skin stretching, origami/kirigami morphing, or geometric eversion, that were successfully mimicked in artificial analogs. However, there still remains an unexplored regime of natural morphing that cannot be reproduced in artificial systems by a "single-mode" morphing mechanism. One example is the "dual-mode"

Designing softness into robots holds great potential for augmenting robotic compliance in dynamic, unstructured environments. However, despite the body's softness, existing models mostly carry inherent hardness in their driving parts, such as pressure-regulating components and rigid circuit boards. This compliance gap can frequently interfere with the robot motion and makes soft robotic design dependent on rigid assembly of each robot component. We present a skin-like electronic system that enab

A wheel drive mechanism is simple, stable, and efficient, but its mobility in unstructured terrain is seriously limited. Using a deformable wheel is one of the ways to increase the mobility of a wheel drive robot. By changing the radius of its wheels, the robot becomes able to pass over not only high steps but also narrow gaps. In this article, we propose a novel design for a variable-diameter wheel using an origami-based soft robotics design approach. By simply folding a patterned sheet into a

A shape memory alloy (SMA) coil spring actuator is fabricated by annealing an SMA wire wound on a rod. Four design parameters are required for the winding: the wire diameter, the rod diameter, the pitch angle and the number of active coils. These parameters determine the force and stroke produced by the actuator. In this paper, we present an engineering design framework to select these parameters on the basis of the desired force and stoke. The behavior of the SMA coil spring actuator is describ

The Venus flytrap uses bistability, the structural characteristic of its leaf, to actuate the leaf's rapid closing motion for catching its prey. This paper presents a flytrap-inspired robot and novel actuation mechanism that exploits the structural characteristics of this structure and a developable surface. We focus on the concept of exploiting structural characteristics for actuation. Using shape memory alloy (SMA), the robot actuates artificial leaves made from asymmetrically laminated carbon

Origami can enable structures that are compact and lightweight. The facets of an origami structure in traditional designs, however, are essentially nondeformable rigid plates. Therefore, implementing energy storage and robust self-locking in these structures can be challenging. We note that the intricately folded wings of a ladybird beetle can be deployed rapidly and effectively sustain aerodynamic forces during flight; these abilities originate from the geometry and deformation of a specialized

Composite membrane origami has been an efficient and effective method for constructing transformable mechanisms while considerably simplifying their design, fabrication, and assembly; however, its limited load-bearing capability has restricted its application potential. With respect to wheel design, membrane origami offers unique benefits compared with its conventional counterparts, such as simple fabrication, high weight-to-payload ratio, and large shape variation, enabling softness and flexibi

Compliance can increase the thrust generated by the fin of a bio-inspired underwater vehicle. To improve the performance of a compliant fin, the compliance should change with the operating conditions; a fin should become stiffer as the oscillating frequency increases. This paper presents a novel variable-stiffness flapping (VaSF) mechanism that can change its stiffness to maximize the thrust of a bio-inspired underwater robot. The mechanism is designed on the basis of an endoskeleton structure,

Compensating the weight of human limbs is important in reducing muscle fatigue experienced by manual laborers. In this study, a compact and lightweight soft wearable weight support device was developed and evaluated. The device supports gravitational force on the shoulder at any arm posture, although there are some limitations in its assistive performance. The device actuator consists of a cam-rod structure, a tendon-driven mechanism, and a rubber band. The desired assistive torque is translated

Using orthosensor, we could obtain 94% quantified balance knee, consequently. And between the techniques, measured resection TKA showed less balanced knee and also required more additional procedures compared to modified gap balancing TKA. Furthermore, with the acquired quantified data during appropriate ligament balancing, the surgeon could eventually reduce the complications associated with soft tissue imbalance in the future.

A series of 14 tripeptide 4-nitroanilide substrates of the type Z-AA-Gly-Arg-NA and Z-AA-Phe-Arg-NA where AA = Ala, Asn, Glu, Lys, Phe, Pro, or Ser were used to map the S3 subsite of several serine proteases involved in blood coagulation. The enzymes studied included bovine thrombin, factor IXa, factor Xa, factor XIa, human beta-factor XIIa (factor XIIa fragment), and activated bovine and human protein C. Kinetic constants (kcat, KM, and kcat/KM) for the enzymatic hydrolysis of the substrates by