大阪大学 · 工学
Tashiro教授の研究室では、アーク溶接における溶融金属の蒸発・凝縮・微粒子形成のメカニズムを、数値シミュレーションと実験を融合して解明しています。特に、アークプラズマの物理的性質が溶接熱源特性に与える影響や、金属蒸気の添加がアークのエネルギー分布に及ぼす影響を重点的に研究しています。金属溶融・移行挙動の制御を目的とした高精度なシミュレーションモデルの構築が、溶接品質の向上に貢献しています。
Figures are computed from collected data and may differ slightly.
In order to clarify the fume formation mechanism in arc welding, a quantitative investigation based on the knowledge of interaction among the electrode, arc and weld pool is indispensable. A fume formation model consisting of a heterogeneous condensation model, a homogeneous nucleation model and a coagulation model has been developed and coupled with the GTA or GMA welding model. A series of processes from evaporation of metal vapour to fume formation from the metal vapour was totally investigat
The energy source characteristics of gas tungsten arc (GTA) strongly depend on the physical property of arc plasma. In welding processes, it has been experimentally confirmed that metal vapour evaporated from a high temperature weld pool drastically changes the property of arc plasma and decreases its temperature. However, the effect of metal vapour on the characteristics of heat flux into a base metal is still not clear owing to the difficulty in experimental studies of arc plasma. In the prese
Abstract The metal transfer behavior is one of the most pivotal links of gas metal arc welding (GMAW) for improving the welding quality. Arc impacts the current path and heat input on the droplet surface, in reverse, the metal droplet detachment makes the arc to flicker. It is hard to make the metal transfer process clear with only experimental methods since the limited measuring space and high temperature in the welding region. In this work, with the help of computational fluid dynamics softwar
The effect of flux ratio on metal transfer behavior during metal-cored arc welding was elucidated through investigation using a standard solid wire and three metal-cored wires with flux mass ratios of (2-2) 10%, 15%, and 20%. Investigation was performed using a shadowgraph technique based on images recorded with a high-speed camera equipped with back-laser illumination. We observed that the droplet transfer frequency increased with both the welding current and flux ratio, with the effect of flux
Energy source properties of electric arcs strongly depend on physical properties of the arc plasma. In a welding process, it has been experimentally confirmed that an admixture of metal vapor diffused from a high temperature weld pool drastically changes the properties of arc plasma and lowers its temperature. However, the effect of the admixture on heat input characteristics to a base metal is not clear due to the difficulty of the experimental study. In this paper, energy source properties of
Open papers in the app to read, cite, and organize with AI.
