Soo Min Kim

Although hexagonal boron nitride (h-BN) is a good candidate for gate-insulating materials by minimizing interaction from substrate, further applications to electronic devices with available two-dimensional semiconductors continue to be limited by flake size. While monolayer h-BN has been synthesized on Pt and Cu foil using chemical vapour deposition (CVD), multilayer h-BN is still absent. Here we use Fe foil and synthesize large-area multilayer h-BN film by CVD with a borazine precursor. These f

Although polycrystalline hexagonal boron nitride (PC-hBN) has been realized, defects and grain boundaries still cause charge scatterings and trap sites, impeding high-performance electronics. Here, we report a method of synthesizing wafer-scale single-crystalline hBN (SC-hBN) monolayer films by chemical vapor deposition. The limited solubility of boron (B) and nitrogen (N) atoms in liquid gold promotes high diffusion of adatoms on the surface of liquid at high temperature to provoke the circular

The effective application of graphene and other 2D materials is strongly dependent on the industrial-scale manufacturing of films and powders of appropriate morphology and quality. Here, we discuss three state-of-the-art mass production techniques, their limitations, and opportunities for future improvement. The industrial application of two-dimensional (2D) materials strongly depends on the large-scale manufacturing of high-quality 2D films and powders. Here, the authors analyze three state-of-

Two-dimensional (2D) materials such as graphene and hexagonal boron nitride (hBN) have attracted significant attention due to their remarkable properties. Numerous interesting graphene/hBN hybrid structures have been proposed but their implementation has been very limited. In this work, the synthesis of patched structures through consecutive chemical vapor deposition (CVD) on the same substrate was investigated. Both in-plane junctions and stacked layers were obtained. For stacked layers, depend

Copper foil is the most common substrate to synthesize monolayer graphene by chemical vapor deposition (CVD). The surface morphology and conditions of the copper foil can be very different depending on the various suppliers or different batches. These surface properties of copper strongly affect the growth behavior of graphene, thus rendering the growth conditions irreproducible when different batches of Cu foil are used. Furthermore, the quality of the graphene is severely affected as well. In

Two-dimensional (2D) transition metal dichalcogenides (TMDs) and their heterostructures have attracted significant interest in both academia and industry because of their unusual physical and chemical properties. They offer numerous applications, such as electronic, optoelectronic, and spintronic devices, in addition to energy storage and conversion. Atomic and structural modifications of van der Waals layered materials are required to achieve unique and versatile properties for advanced applica

We propose bis(trifluoromethanesulfonyl)imide [(CF(3)SO(2))(2)N](-) (TFSI) as a transparent strong electron-withdrawing p-type dopant in carbon nanotubes (CNTs). The conventional p-dopant, AuCl(3), has several drawbacks, such as hygroscopic effect, formation of Au clusters, decrease in transmittance, and high cost in spite of the significant increase in conductivity. TFSI is converted from bis(trifluoromethanesulfonyl)amine (TFSA) by accepting electrons from CNTs, subsequently losing a proton as

High-quality and large-area molybdenum disulfide (MoS₂ ) thin film is highly desirable for applications in large-area electronics. However, there remains a challenge in attaining MoS₂ film of reasonable crystallinity due to the absence of appropriate choice and control of precursors, as well as choice of suitable growth substrates. Herein, a novel and facile route is reported for synthesizing few-layered MoS₂ film with new precursors via chemical vapor deposition

Abstract The imperfect interfaces between 2D transition metal dichalcogenides (TMDs) are suitable for boosting the hydrogen evolution reaction (HER) during water electrolysis. Here, the improved catalytic activity at the spatial heterojunction between 1T’ Re x Mo 1− x S 2 and 2H MoS 2 is reported. Atomic‐scale electron microscopy confirms that the heterojunction is constructed by an in‐situ two‐step growth process through chemical vapor deposition. Electrochemical microcell measurements demonstr

A selective chemosensor was developed for the colorimetric detection of CN⁻ and S²⁻ in aqueous solution.

Two-dimensional (2D) van der Waals (vdW) heterostructures exhibit novel physical and chemical properties, allowing the development of unprecedented electronic, optical, and electrochemical devices. However, the construction of wafer-scale vdW heterostructures for practical applications is still limited due to the lack of well-established growth and transfer techniques. Herein, we report a method for the fabrication of wafer-scale 2D vdW heterostructures with an ultraclean interface between layer

Vertical van der Waals heterostructures (vdWhs), which are made by layer-by-layer stacking of two-dimensional (2D) materials, offer great opportunities for the development of extraordinary physics and devices such as topological superconductivity, robust quantum Hall phenomenon, electron-hole pair condensation, Coulomb drag, and tunneling devices. However, the size of vdWhs is still limited to the order of a few micrometers, which restricts the large-scale roll-to-roll processes for industrial a

Surface self-reconstruction of oxygen evolution reaction (OER) electrocatalysts generally occurs during the electrochemical activation process. Herein, we study the surface self-reconstruction of a 2D layered Fe-doped Ni-thiophosphate (Ni_<i>x</i>Fe_1-<i>x</i>PS₃) nanosheet. The role of Fe in the surface self-reconstruction of NiPS₃ during the OER is investigated by using an <i>in situ</i> Raman analysis. Formation of amorphous metal/non-metal oxide laye