Kyung Hee University · 工学
Professor Wonseok Chung's research lab specializes in advanced construction materials and structural engineering, with a strong focus on the mechanical and thermal performance of cement-based composites enhanced with carbon nanotubes (CNTs). The lab investigates the effects of nanomaterials—particularly multiwalled and single-walled carbon nanotubes—on the compressive strength, thermal response, and durability of concrete and mortar. Additionally, the lab conducts advanced finite element analysis to study load distribution and structural behavior in bridge systems, including the influence of deck cracking and secondary structural elements.
Figures are computed from collected data and may differ slightly.
The AASHTO LRFD load distribution factor equation was developed based on elastic finite element analysis considering only primary members, i.e., the effects of secondary elements such as lateral bracing and parapets were not considered. Meanwhile, many bridges have been identified as having significant cracking in the concrete deck. Even though deck cracking is a well-known phenomenon, the significance of pre-existing cracks on the live load distribution has not yet been assessed. The purpose of
Enhancements in the compressive strength of ordinary Portland cement (OPC) mortar upon the incorporation of multiwalled carbon nanotubes (MWCNTs) were investigated. The MWCNT concentration, water/cement (W/C) ratio, curing age, and MWCNT concentration control method were selected as experimental parameters, and their effect on the compressive strength of the MWCNT-cement composites was examined. Here, the MWCNT concentration was varied from 0.25 wt% to 1.0 wt%, while W/C ratios in the range of 0
The addition of small amounts of carbon nanotubes (CNTs) to cement-based materials modifies their thermal and electrical characteristics. This study investigated the void detection and filling rates of cement grout with multi-walled carbon nanotubes (MWCNTs). MWCNT grouts of 40 mm × 40 mm × 160 mm were fabricated. Specimens were tested by thermal imaging, electrical resistance analyses, and magnetic field tests. The experimental parameters were the concentration of MWCNT and the grout filling ra
Carbon nanotubes (CNTs) are a primary nanomaterial that have outstanding physical and mechanical characteristics, and CNTs can be combined with cement-based materials to alter their heating characteristics. In this study, the types of CNTs used were multiwalled carbon nanotubes (MWCNTs) and single-walled carbon nanotubes (SWCNTs). Experiments were performed to determine the altered heating characteristics of the CNT cement mortars. The parameters of the experiment were CNT type, CNT content, cur
Open papers in the app to read, cite, and organize with AI.
