Pohang University of Science and Technology · Engineering
이 교수의 연구실은 유기 반도체를 활용한 유연하고 저비용의 전자 소자 개발에 초점을 맞추고 있습니다. 특히 유기 필드효과트랜지스터 기반 메모리, 광검출기, 발광소자 등에서의 응용을 연구하며, 나노입자 및 고분자 전기적 특성을 활용한 혁신적인 소자 구조를 개발하고 있습니다. 대량생산이 가능한 인쇄 전자공정과 결합한 유기 광전소자 기술의 실현 가능성을 탐구하고 있습니다.
Figures are computed from collected data and may differ slightly.
While organic electronics is mostly dominated by light-emitting diodes, photovoltaic cells and transistors, optoelectronics properties peculiar to organic semiconductors make them interesting candidates for the development of innovative and disruptive applications also in the field of light signal detection. In fact, organic-based photoactive media combine effective light absorption in the region of the spectrum from ultraviolet to near-infrared with good photogeneration yield and low-temperatur
For at least the past ten years printed electronics has promised to revolutionize our daily life by making cost-effective electronic circuits and sensors available through mass production techniques, for their ubiquitous applications in wearable components, rollable and conformable devices, and point-of-care applications. While passive components, such as conductors, resistors and capacitors, had already been fabricated by printing techniques at industrial scale, printing processes have been str
Abstract Organic field‐effect transistor (FET) memory is an emerging technology with the potential to realize light‐weight, low‐cost, flexible charge storage media. Here, solution‐processed poly[9,9‐dioctylfluorenyl‐2,7‐diyl]‐co‐(bithiophene)] (F8T2) nano floating gate memory (NFGM) with a top‐gate/bottom‐contact device configuration is reported. A reversible shift in the threshold voltage ( V Th ) and reliable memory characteristics was achieved by the incorporation of thin Au nanoparticles (NP
Abstract Organic non‐volatile memory (ONVM) based on pentacene field‐effect transistors (FETs) has been fabricated using various chargeable thin polymer gate dielectrics—termed electrets—onto silicon oxide insulating layers. The overall transfer curve of organic FETs is significantly shifted in both positive and negative directions and the shifts in threshold voltage ( V Th ) can be systemically and reversibly controlled via relatively brief application of the appropriate external gate bias. The
A record-breaking high electron mobility of 7.0 cm(2) V(-1) s(-1) for n-channel polymer OFETs is reported. By the incorporation of only one nitrile group as an electron-withdrawing function in the vinyl linkage of the DPP-based copolymer, a dramatic inversion of majority charge-carriers from holes to electrons is achieved.
Singlet and triplet–triplet energy transfer in phosphorescent dye doped polymer light emitting devices were investigated. Poly(N-vinylcarbazol) and poly[9,9′-di-n-hexyl-2,7-fluorene-alt- 1,4-(2,5-di-n-hexyloxy)phenylene] (PFHP) were selected as the host polymer for the phosphorescent dopants fac-tris(2-phenylpyridine) iridium(III) [Ir(ppy)3] and 2,3,7,8,12,13, 17,18-octaethyl-21H,23H-porphyrin platinum(II) (PtOEP) because of their high triplet energy levels and long phosphorescence lifetimes. In
Large-area polymer FET arrays and integrated circuits (ICs) are successfully demonstrated via a simple wire-bar-coating process. Both a highly crystalline conjugated polymer layer and very smooth insulating polymer layer are formed by a consecutive wire-bar-coating process on a 4-inch plastic substrate with a short processing time for application as the active and dielectric layers of OFET arrays and ICs.
Abstract The effects of using a blocking dielectric layer and metal nanoparticles (NPs) as charge‐trapping sites on the characteristics of organic nano‐floating‐gate memory (NFGM) devices are investigated. High‐performance NFGM devices are fabricated using the n‐type polymer semiconductor, poly{[ N , N ′‐bis(2‐octyldodecyl)‐naphthalene‐1,4,5,8‐bis(dicarboximide)‐2,6‐diyl]‐alt‐5,5′‐(2,2′‐bithiophene)} (P(NDI2OD‐T2)), and various metal NPs. These NPs are embedded within bilayers of various polymer
Organic phototransistors (OPTs) were fabricated from pentacene and copper phthalocyanine (CuPC) based on the geometry of organic field-effect transistors (OFETs); and the effect of the wavelength of the incident light source on their performance was examined. High performance OFETs with pentacene and CuPC were fabricated and the characteristics of the OPTs were examined under UV and visible-light irradiations with top illumination. The CuPC and pentacene OPTs show a high responsivities of 0.5–2
A uniform ultrathin polymer film is deposited over a large area with molecularlevel precision by the simple wire-wound bar-coating method. The bar-coated ultrathin films not only exhibit high transparency of up to 90% in the visible wavelength range but also high charge carrier mobility with a high degree of percolation through the uniformly covered polymer nanofibrils. They are capable of realizing highly sensitive multigas sensors and represent the first successful report of ethylene detection
Abstract High‐performance top‐gated organic field‐effect transistor (OFET) memory devices using electrets and their applications to flexible printed organic NAND flash are reported. The OFETs based on an inkjet‐printed p‐type polymer semiconductor with efficiently chargeable dielectric poly(2‐vinylnaphthalene) (PVN) and high‐k blocking gate dielectric poly(vinylidenefluoride‐trifluoroethylene) (P(VDF‐TrFE)) shows excellent non‐volatile memory characteristics. The superior memory characteristics
Organic field-effect transistors (OFETs) are the central building blocks of organic electronics, but still suffer from low performance and manufacturing difficulties. This is due in part to the absence of doping, which is mostly excluded from OFET applications for the concern about uncontrollable dopant diffusion. Doping enabled the modern semiconductor industry to build essential components like Ohmic contacts and P-N junctions, empowering devices to function as designed. Recent breakthroughs i
Abstract The gate dielectric layer is an essential element of field‐effect transistors (FETs), large area integrated circuits, and various application electronics. Beyond basic insulation between the semiconductor layer and gate electrode, FET performance largely depends on the capacitance of the chosen insulator layer properties. Recent functional devices developments require new functionalities, such as high mechanical flexibility and stretchability in addition to basic insulating and physical
Polymer semiconductors have been experiencing a remarkable improvement in electronic and optoelectronic properties, which are largely related to the recent development of a vast library of high-performance, donor-acceptor copolymers showing alternation of chemical moieties with different electronic affinities along their backbones. Such steady improvement is making conjugated polymers even more appealing for large-area and flexible electronic applications, from distributed and portable electroni
Open papers in the app to read, cite, and organize with AI.