Kyung Hee University · 工学
Professor Zong-Hong Lin's research lab specializes in the development of advanced nanogenerators and nanosensors based on triboelectric and piezoelectric effects. The lab focuses on harvesting mechanical and electrostatic energy from environmental sources such as water drops, waves, and airflow, with applications in self-powered systems and real-time sensing. Key research directions include the design of flexible, transparent, and lead-free nanogenerators using materials like BaTiO₃ nanotubes and PDMS, as well as highly sensitive, low-cost sensors for detecting ions (e.g., Hg²⁺) and organic molecules (e.g., catechin). The lab emphasizes sustainable, scalable, and cost-effective fabrication for practical deployment in wearable electronics, environmental monitoring, and smart infrastructure.
Figures are computed from collected data and may differ slightly.
A new prototype triboelectric nanogenerator with superhydrophobic and self-cleaning features is invented to harvest water drop energy based on a sequential contact electrification and electrostatic induction process. Because of the easy-fabrication, cost-effectiveness, and robust properties, the developed triboelectric nanogenerator expands the potential applications to harvesting energy from household wastewater and raindrops.
Electrical wave mechanics: A newly designed triboelectric nanogenerator is based on the contact electrification between a patterned polydimethylsiloxane pyramid array and water. Cost-effective and simple, the prototype triboelectric nanogenerator shows the potential to harvest energy from liquid waves and serve as chemical and temperature sensors. Contact electrification, also called triboelectrification, is an old but well-known phenomenon in which surface charge transfer occurs when two materi
Moving to mercury: The first triboelectric effect-based sensor for the detection of Hg2+ ions by using Au nanoparticles (see picture; red) as electrical performance enhancer and recognition element has been successfully demonstrated. This self-powered and stand-alone triboelectric nanosensor has the advantages of simplicity, low cost, high selectivity, and sensitivity. As a service to our authors and readers, this journal provides supporting information supplied by the authors. Such materials ar
We have developed a simple, cost-effective, and scalable approach to fabricate a piezoelectric nanogenerator (NG) with stretchable and flexible characteristics using BaTiO3 nanotubes, which were synthesized by the hydrothermal method. The NG was fabricated by making a composite of the nanotubes with polymer poly(dimethylsiloxane) (PDMS). The peak open-circuit voltage and short-circuit current of the NG reached a high level of 5.5 V and 350 nA (current density of 350 nA/cm(2)), respectively. It w
Mechanical energy harvesting based on triboelectric effect has been proven to be a simple, cost-effective, and robust method for electricity generation. In this study, we developed a rationally designed triboelectric nanogenerator (TENG) by utilizing the contact electrification between a polytetrafluoroethylene (PTFE) thin film and a layer of TiO2 nanomaterial (nanowire and nanosheet) array. The as-developed TENG was systematically studied and demonstrated as a self-powered nanosensor toward cat
When water is passing through the air or an insulating tube, it will contain not only the mechanical energy but also the electrostatic energy due to the existence of triboelectric charges on its surface as a result of contact with the air/solid surface. In this paper, a hybrid triboelectric nanogenerator (TENG) is designed to simultaneously harvest the electrostatic and mechanical energies of flowing water. Water-TENG, mainly constructed by a superhydrophobic TiO2 layer with hierarchical micro/n
Self‐powered nanosensors and nanosystems have attracted significant attention in the past decades and have gradually become the most desirable and promising prototype for environmental protection/detection because no battery is needed to power the device. Therefore, in this paper a design is proposed for a self‐powered photodetector based on triboelectric nanogenerator (TENG) configuration. 3D dendritic TiO 2 nanostructures are synthesized as the built‐in UV photodetector as well as the contact
Interruption of the wound healing process due to pathogenic infection remains a major health care challenge. The existing methods for wound management require power sources that hinder their utilization outside of clinical settings. Here, a next generation of wearable self-powered wound dressing is developed, which can be activated by diverse stimuli from the patient's body and provide on-demand treatment for both normal and infected wounds. The highly tunable dressing is composed of thermocatal
We have demonstrated a simple approach to the synthesis of fluorescent trigonal tellurium (t-Te) nanowires in aqueous solution at room temperature. The t-Te nanowires were prepared from the reduction of tellurium dioxide (TeO2) with concentrated hydrazine solution through deposition of Te atoms that were reduced from telluride ions (Te2−) and dissolved from amorphous tellurium (a-Te) nanoparticles onto t-Te nanocrystallines. By carefully controlling the growth time from 40 to 120 min, we prepare
Open papers in the app to read, cite, and organize with AI.
