한흥남 교수
Han, Heung Nam
서울대학교 Department of Materials Science and Engineering · 공학
연구실 소개
한흥남 교수의 연구실은 전자기기 및 금속 가공 공정에서의 전자기적 상호작용과 열기계적 거동을 이해하고자, 전자기플라스티시티, 열기계적 거동 해석, 그리고 인공지능 기반 재료 특성 추출 기술을 융합한 연구를 수행하고 있습니다. 특히, 고체화 과정에서의 응고 거동과 균열 발생 메커니즘을 유한요소모델링과 분자역학 계산을 통해 규명하고 있으며, 실생활 재료의 기계적 거동을 정밀하게 예측하는 데 초점을 맞추고 있습니다. 이는 첨단 철강 및 금속 소재의 설계 및 공정 최적화에 기여합니다.
전자기플라스티시티응고 거동유한요소해석인공지능 재료 특성 추출열기계적 해석
연구 현황
논문 수
437
총 인용 수
12,885
최근 5년 논문
102
주요 분야
공학
연구 성과 추이
표시된 성과는 수집된 데이터 기준으로 산출되며, 일부 차이가 있을 수 있습니다.
5개년 연도별 논문 게재 수
102총합
2021
2022
2023
2024
2025
5개년 연도별 피인용 수
1,687총합
20212022202320242025
주요 논문
151
논문|인용수 245·2013
Electric current-induced annealing during uniaxial tension of aluminum alloyMoon‐Jo Kim, Keunho Lee, Kyu Hwan Oh, In‐Suk Choi, Hyeong-Ho Yu, Sung-Tae Hong, Heung Nam Han
SJR Q1FWCI 7.5Scripta Materialia
Electrical and Electronic EngineeringEngineering
2
논문|인용수 209·2004
A model for deformation behavior and mechanically induced martensitic transformation of metastable austenitic steelHeung Nam Han, Chang Gil Lee, Chang‐Seok Oh, Tae‐Ho Lee, Sung-Joon Kim
SJR Q1FWCI 13.0Acta Materialia
Mechanical EngineeringEngineering
3
논문|인용수 171·2016
Electric current–assisted deformation behavior of Al-Mg-Si alloy under uniaxial tensionMoon‐Jo Kim, Myoung‐Gyu Lee, K. Hariharan, Sung-Tae Hong, In‐Suk Choi, Dae-Yong Kim, Kyu Hwan Oh, Heung Nam Han
SJR Q1FWCI 6.0International Journal of Plasticity
Electrical and Electronic EngineeringEngineering
4
논문|인용수 156·2012
Microstructure and tensile behavior of duplex low-density steel containing 5mass% aluminumS.-J. Park, Byoungchul Hwang, Kyoung Ho Lee, T.-H. Lee, Dong‐Woo Suh, Heung Nam Han
SJR Q1FWCI 11.3Scripta Materialia
Mechanical EngineeringEngineering
5
논문|인용수 150·2010
Investigation of strain-induced martensitic transformation in metastable austenite using nanoindentationTae Hong Ahn, C.-S. Oh, Dong Hoe Kim, K.H. Oh, Hongbin Bei, E.P. George, Heung Nam Han
SJR Q1FWCI 10.3Scripta Materialia
Mechanics of MaterialsEngineering
6
논문|인용수 138·2022
Athermally enhanced recrystallization kinetics of ultra-low carbon steel via electric current treatmentKyeongjae Jeong, Sungwoo Jin, Sung-Gyu Kang, Ju-Won Park, Hye-Jin Jeong, Sung-Tae Hong, Seung Hyun Cho, Moon‐Jo Kim, Heung Nam Han
SJR Q1FWCI 12.2Acta Materialia
Electrical and Electronic EngineeringEngineering
7
논문|인용수 138·2013
Three-dimensional numerical and experimental investigation on friction stir welding processes of ferritic stainless steelHoon‐Hwe Cho, Sung-Tae Hong, jae-hun Roh, Hyun‐Sik Choi, Suk Hoon Kang, Russell Steel, Heung Nam Han
SJR Q1FWCI 17.0Acta Materialia
Mechanical EngineeringEngineering
8
논문|인용수 124·2017
Effect of electric current on recrystallization kinetics in interstitial free steel and AZ31 magnesium alloyJu-Won Park, Hye-Jin Jeong, Sungwoo Jin, Moon‐Jo Kim, Kyooyoung Lee, Jae‐Joong Kim, Sung-Tae Hong, Heung Nam Han
SJR Q1FWCI 5.0Materials Characterization
Electrical and Electronic EngineeringEngineering
9
논문|인용수 120·2008
Design method for TRIP-aided multiphase steel based on a microstructure-based modelling for transformation-induced plasticity and mechanically induced martensitic transformationHeung Nam Han, Chang‐Seok Oh, Gyosung Kim, Ohjoon Kwon
SJR Q1FWCI 11.8Materials Science and Engineering A
Mechanical EngineeringEngineering
10
논문|인용수 118·2009
Crystal plasticity finite element modeling of mechanically induced martensitic transformation (MIMT) in metastable austeniteMyoung‐Gyu Lee, Sung-Joon Kim, Heung Nam Han
SJR Q1FWCI 8.1International Journal of Plasticity
Mechanical EngineeringEngineering
11
논문|인용수 115·2003
A ductile fracture criterion in sheet metal forming processHeung Nam Han, Keun-Hwan Kim
SJR Q1FWCI 3.6Journal of Materials Processing Technology
Mechanical EngineeringEngineering
12
논문|인용수 108·2020
Elucidating the origin of electroplasticity in metallic materialsMoon-Jo Kim, Sangmoon Yoon, Siwook Park, Hye‐Jin Jeong, Ju-won Park, Kuntae Kim, Janghyun Jo, Taehoon Heo, Sung‐Tae Hong, Seung Hyun Cho, Young‐Kyun Kwon, In‐Suk Choi
SJR Q1FWCI 5.6Applied Materials TodayOA
Electroplastic phenomenon has been demonstrated by that the elongation increases remarkably during deformation under electric current without a significant elevation of temperature due to Joule heating. Since the 1960s, the electroplasticity has been actively investigated; however, an exact explanation of the mechanism has been lacking. In this study, the origin of electroplasticity in metallic materials is elucidated based on first principle calculation, finite element simulation and experiment
Electrical and Electronic EngineeringEngineering
13
논문|인용수 105·2017
Elastocaloric effect in polycrystalline Ni 50 Ti 45.3 V 4.7 shape memory alloyYanghoo Kim, Min-Gu Jo, Ju-Won Park, Hyung-Ki Park, Heung Nam Han
SJR Q1FWCI 2.5Scripta Materialia
Materials ChemistryMaterials Science
14
논문|인용수 86·2016
Effect of pulsed electric current on dissolution of Mg 17 Al 12 phases in as-extruded AZ91 magnesium alloyHye-Jin Jeong, Moon‐Jo Kim, Ju-Won Park, Chang Dong Yim, Jae‐Joong Kim, Oh Duck Kwon, Phaniraj Madakashira, Heung Nam Han
SJR Q1FWCI 3.2Materials Science and Engineering A
Electrical and Electronic EngineeringEngineering
15
논문|인용수 84·2002
A model for deformation, temperature and phase transformation behavior of steels on run-out table in hot strip millHeung Nam Han, Jae Kon Lee, Hong Joon Kim, Young-Sool Jin
SJR Q1FWCI 2.2Journal of Materials Processing Technology
Mechanical EngineeringEngineering
대표 연구 분야
Mechanical EngineeringElectrical and Electronic EngineeringMaterials ChemistryMechanics of MaterialsAtomic and Molecular Physics, and OpticsElectronic, Optical and Magnetic Materials
한흥남 교수의 연구를 Nubint에서 더 깊이 살펴보세요
이 연구실의 논문을 앱에서 열어 AI와 함께 읽고, 핵심을 요약하고, 내 글에 인용하세요.