이명재 교수

Topological photonics have provided new insights for the manipulation of light. Analogous to electrons in topological insulators, photons travelling through the surface of a topological photonic structure or the interface of two photonic structures with different topological phases are free from backscattering caused by structural imperfections or disorder. This exotic nature of the topological edge state (TES) is truly beneficial for nanophotonic devices that suffer from structural irregulariti

Novel concepts for manipulating plasmonic resonances and the biocompatibility of plasmonic devices offer great potential in versatile applications involving real-time and in vivo monitoring of analytes with high sensitivity in biomedical and biological research. Here we report a biocompatible and highly tunable plasmonic bio/chemical sensor consisting of a natural silk protein and a gold nanostructure. Our silk plasmonic absorber sensor (SPAS) takes advantage of the strong local field enhancemen

We report optically pumped room temperature single mode laser that contains a thin film of hybrid perovskite, an emerging photonic material, as gain medium. Two-dimensional square lattice photonic crystal (PhC) backbone structure enables single mode laser operation via a photonic bandedge mode, while a thin film of methyl-ammonium lead iodide (CH3NH3PbI3) spin-coated atop provides optical gain for lasing. Two kinds of bandedge modes, Γ and M, are employed, and both devices laser in single mode a

Photolithography and electron-beam lithography are the most common methods for making nanoscale devices from semiconductors. While these methods are robust for bulk materials, they disturb the electrical properties of two-dimensional (2D) materials, which are highly sensitive to chemicals used during lithography processes. Here, we report a resist-free lithography method, based on direct laser patterning and resist-free electrode transfer, which avoids unintentional modification to the 2D materi

A fully biocompatible plasmonic quasi-3D nanostructure is demonstrated by a simple and reliable fabrication method using strong adhesion between gold and silk fibroin. The quasi-3D nature gives rise to complex photonic responses in reflectance that are prospectively useful in bio/chemical sensing applications. Laser interference lithography is utilized to fabricate large-area plasmonic nanostructures.

Anderson localization in random structures is an intriguing physical phenomenon, for which experimental verifications are far behind theoretical predictions. We report the first experimental confirmations of photonic band-tail states and a complete transition of Anderson localization. An optically activated photonic crystal alloy platform enables the acquisition of extensive experimental data exclusively on pure eigenstates, revealing direct evidence of band-tail states and Anderson localization

High-density photonic integrated circuits (PICs) are expected to replace their current electronic counterparts in the future. The most crucial prerequisite for realizing successful PICs is to develop a low-loss coupling technique between active and passive photonic components based on various nanoscale materials and devices. Here we propose and demonstrate an on-chip integration technique in which a high-refractive-index layer constitutes the coplanar structural backbone across the entire PIC ch

We report the room-temperature lasing action from two-dimensional photonic crystal (PC) structures composed of a passive Si3N4 backbone with an over-coat of CdSe/CdS/ZnS colloidal quantum dots (CQDs) for optical gain. When optically excited, devices lased in dual PC band-edge modes, with the modal dominance governed by the thickness of the CQD over-layer. The demonstrated laser platform should have an impact on future photonic integrated circuits as the on-chip coupling between active and passiv

A combined pumping and tracer test was conducted at a highly fractured aquifer system. The hydrogeologic units underlying the test site are reclamation soil, weathered rock layer, and fractured layer. The fractured layer is the main aquifer for this site. Prior to pumping and tracer tests, slug tests were conducted at four test wells. The test data revealed existence of a low permeability zone near well OB-1. Generally the estimated hydraulic conductivities are in the order of 10-4 cm/sec. A pum

Abstract A method of wet‐transferring a densely packed colloidal quantum dot (CQD) film is reported herein. Layers of poly(vinyl alcohol) (sacrificial layer) and poly(methyl methacrylate) (temporary mechanical support) are spin‐coated below and above the CQD film, respectively; the two layers are eventually removed, resulting in a single CQD film on an alien substrate. CQD films as large as 1 cm × 1 cm are transferred to any substrate, including flexible and prepatterned ones, with very little m

The electrical control of photonic crystal (PhC) lasers has been an attractive but challenging issue. Laser operation by electrical injection is of key importance for the viability and applicability of the PhC lasers. Another key factor is the electrical modulation of the laser output. The Fermi level of a graphene monolayer can be controlled by electrical gating, which adjusts its optical absorption. In this study, a graphene monolayer sheet is integrated on top of a two-dimensional PhC structu

Movement of a three-dimensional solid at an air-water interface is strongly influenced by the extrinsic interactions between the solid and the water. The finite thickness and volume of a moving solid causes capillary interactions and water-induced drag. In this Letter, we report the fabrication and dynamical imaging of freely floating MoS₂ solids on water, which minimizes such extrinsic effects. For this, we delaminate a synthesized wafer-scale monolayer MoS₂ onto a water s

The level of radioactivity from <SUP>222</SUP>Rn in the air has to be monitored to control systematic effects on the background level at the KIMS (Korea Invisible Mass Search) dark matter search experiment. We designed and constructed a radon detector using a silicon photodiode that collects ^(218)Po and ^(214)Po daughter ions electrically and detects their α decays. Results for the detector calibration with a standard radon source, as well as the dependence of the -particle detection efficiency