박용래 교수

We describe the design, fabrication, and calibration of a highly compliant artificial skin sensor. The sensor consists of multilayered mircochannels in an elastomer matrix filled with a conductive liquid, capable of detecting multiaxis strains and contact pressure. A novel manufacturing method comprised of layered molding and casting processes is demonstrated to fabricate the multilayered soft sensor circuit. Silicone rubber layers with channel patterns, cast with 3-D printed molds, are bonded t

A hyperelastic pressure transducer is fabricated by embedding silicone rubber with microchannels of conductive liquid eutectic gallium-indium. Pressing the surface of the elastomer with pressures in the range of 0-100 kPa will deform the cross-section of underlying channels and change their electric resistance by as much as 50%. Microchannels with dimensions as small as 25 mu m are obtained with a maskless, soft lithography process that utilizes direct laser exposure. Change in electrical resist

We describe the design and control of a wearable robotic device powered by pneumatic artificial muscle actuators for use in ankle-foot rehabilitation. The design is inspired by the biological musculoskeletal system of the human foot and lower leg, mimicking the morphology and the functionality of the biological muscle-tendon-ligament structure. A key feature of the device is its soft structure that provides active assistance without restricting natural degrees of freedom at the ankle joint. Four

We describe a MRI-compatible biopsy needle instrumented with optical fiber Bragg gratings for measuring bending deflections of the needle as it is inserted into tissues. During procedures, such as diagnostic biopsies and localized treatments, it is useful to track any tool deviation from the planned trajectory to minimize positioning errors and procedural complications. The goal is to display tool deflections in real time, with greater bandwidth and accuracy than when viewing the tool in MR imag

Soft sensors have been playing a crucial role in detecting different types of physical stimuli to part or the entire body of a robot, analogous to mechanoreceptors or proprioceptors in biology. Most of the currently available soft sensors with compact form factors can detect only a single deformation mode at a time due to the limitation in combining multiple sensing mechanisms in a limited space. However, realizing multiple modalities in a soft sensor without increasing its original form factor

We describe the design of an active soft ankle-foot orthotic device powered by pneumatic artificial muscles for treating gait pathologies associated with neuromuscular disorders. The design is inspired by the biological musculoskeletal system of a human foot and a lower leg, and mimics the muscle-tendon-ligament structure. A key feature of the device is that it is fabricated with flexible and soft materials that provide assistance without restricting degrees of freedom at the ankle joint. Three

Force sensing is an essential requirement for dexterous robot manipulation. We describe composite robot end-effectors that incorporate optical fibers for accurate force sensing and estimation of contact locations. The design is inspired by the sensors in arthropod exoskeletons that allow them to detect contacts and loads on their limbs. In this paper, we present a fabrication process that allows us to create hollow multimaterial structures with embedded fibers and the results of experiments to c

Force sensing is an essential requirement for dexterous robot manipulation. Although strain gages have been widely used, a new sensing approach is desirable for applications that require greater robustness, design flexibility and immunity to electromagnetic noise. An exoskeletal force sensing robot finger was developed by embedding fiber Bragg grating (FBG) sensors into a polymer-based structure. Multiple FBG sensors were embedded into the structure to allow the manipulator to sense and measure

The increasing demand for physical interaction between humans and robots has led to an interest in robots that guarantee safe behavior when human contact occurs. However, attaining established levels of performance while ensuring safety creates formidable challenges in mechanical design, actuation, sensing and control. To promote safety without compromising performance, a human-friendly robotic arm has been developed using the concept of hybrid actuation. The new design employs high-power, low-i

We describe the design, fabrication, and characterization of a novel pneumatic artificial muscle actuator with embedded contraction sensing. The muscle is composed of three main components: elastomer air chamber, embedded Kevlar threads, and a helical microchannel filled with a liquid conductor. When the air chamber is inflated with compressed air, the constrained length of the Kevlar threads causes the muscle to contract in the axial direction. During this contraction, the microchannel can dete

Pneumatic artificial muscles (PAMs) have gained wide use in the field of robotics due to their ability to generate linear forces and motions with a simple mechanism, while remaining lightweight and compact. However, PAMs are limited by their traditional cylindrical form factors, which must increase radially to improve contraction force generation. Additionally, this form factor results in overly complicated fabrication processes when embedded fibers and sensor elements are required to provide ef

In recent years, soft components, such as pneumatic artificial muscles (PAMs), have been increasingly employed to design safer wearable devices. Despite the inherent compliance of the materials used to fabricate PAMs, the actuators are able to produce relatively large forces and work when compared to their weight. However, effective operation of these systems has traditionally required bulky external force and position sensors, which limit the maneuverability of users. To overcome these issues,

Carbon nanotube-reinforced polymer composites were fabricated by high shear mixing. The microstructure and the electrical properties of the carbon nanotube–polymer composites were investigated by scanning electron microscopy and electrical resistance measurement. We found that the carbon nanotube composites showed high electrical conductivity (1.5 S m −1 ) at 7.0 wt% of carbon nanotubes, and the increase in thickness enhanced the electrical conductivity of the composites. The multifunctional pro

A proposed adaptive soft orthotic device performs motion sensing and production of assistive forces with a modular, pneumatically-driven, hyper-elastic composite. Wrapping the material around a joint will allow simultaneous motion sensing and active force response through shape and rigidity control. This monolithic elastomer sheet contains a series of miniaturized pneumatically-powered McKibben-type actuators that exert tension and enable adaptive rigidity control. The elastomer is embedded with

Despite the great advancement in designing diverse soft robots, they are not yet as dexterous as animals in many aspects. One challenge is that they still lack the compact design of an artificial motor unit with a great comprehensive performance that can be conveniently fabricated, although many recently developed artificial muscles have shown excellent properties in one or two aspects. Herein, an artificial motor unit is developed based on gold-coated ultrathin liquid crystal elastomer (LCE) fi