송재준 교수
Jae-Joon Song
서울대학교 · 공학
연구실 소개
송재준 교수의 연구실은 지질자원 및 환경공학 분야에서 초점을 맞추고 있으며, 특히 초임계 이산화탄소(CO₂) 지하 저장과 관련된 다공성 매체 내 유체 흐름 거동을 핵심 연구 주제로 삼고 있습니다. 고해상도 미세구조 분석을 바탕으로 한 투과성 및 비다르시 흐름 특성 분석, 3D 프린팅을 활용한 암석 모의 실험, 그리고 미세균형 구조 분석을 통해 암석의 거동 기반 설계 및 안전성 평가에 기여하고 있습니다. 연구는 실험적 측정, 수치 모델링, 이미징 기반 분석을 융합하여 실용적 응용 가능성을 확보하고 있습니다.
초임계 CO₂비다르시 흐름3D 프린팅 암석미세구조 분석지하 저장 안전성
연구 현황
논문 수
174
총 인용 수
1,952
최근 5년 논문
51
주요 분야
공학
연구 성과 추이
표시된 성과는 수집된 데이터 기준으로 산출되며, 일부 차이가 있을 수 있습니다.
5개년 연도별 논문 게재 수
51총합
2022
2023
2024
2025
2026
5개년 연도별 피인용 수
277총합
20222023202420252026
주요 논문
151
논문|인용수 303·2009
Numerical simulation of a direct shear test on a rock joint using a bonded-particle modelJung–Wook Park, Jae-Joon Song
SJR Q1FWCI 11.9International Journal of Rock Mechanics and Mining Sciences
Mechanics of MaterialsEngineering
2
논문|인용수 120·2013
Numerical method for the determination of contact areas of a rock joint under normal and shear loadsJung–Wook Park, Jae-Joon Song
SJR Q1FWCI 12.6International Journal of Rock Mechanics and Mining Sciences
Mechanics of MaterialsEngineering
3
논문|인용수 106·2014
Model for the shear behavior of rock joints under CNL and CNS conditionsYong-Ki Lee, Jung–Wook Park, Jae-Joon Song
SJR Q1FWCI 4.4International Journal of Rock Mechanics and Mining Sciences
Mechanics of MaterialsEngineering
4
논문|인용수 84·2001
Estimation of joint length distribution using window samplingJae-Joon Song, Chung−In Lee
SJR Q1FWCI 2.1International Journal of Rock Mechanics and Mining Sciences
Mechanics of MaterialsEngineering
5
논문|인용수 74·2015
Abrasive water jet cutting methods for reducing blast-induced ground vibration in tunnel excavationJung-Gyu Kim, Jae-Joon Song
SJR Q1FWCI 7.3International Journal of Rock Mechanics and Mining Sciences
Civil and Structural EngineeringEngineering
6
논문|인용수 66·2001
Stability analysis of rock blocks around a tunnel using a statistical joint modeling techniqueJae-Joon Song, Chung−In Lee, Masahiro Seto
SJR Q1FWCI 4.7Tunnelling and Underground Space Technology
Management, Monitoring, Policy and LawEnvironmental Science
7
논문|인용수 51·2021
A deep convolutional neural network for rock fracture image segmentationHoon Byun, Jineon Kim, Dongyoung Yoon, Il-Seok Kang, Jae-Joon Song
SJR Q2FWCI 4.8Earth Science Informatics
Civil and Structural EngineeringEngineering
8
논문|인용수 50·2021
Semi-automatic calculation of joint trace length from digital images based on deep learning and data structuring techniquesYongki Lee, Jineon Kim, Chae-Soon Choi, Jae-Joon Song
SJR Q1FWCI 9.0International Journal of Rock Mechanics and Mining Sciences
GeologyEarth and Planetary Sciences
9
논문|인용수 38·2020
Applicability of powder-based 3D printing technology in shear behavior analysis of rock mass containing non-persistent jointsSayedalireza Fereshtenejad, Jae-Joon Song
SJR Q1FWCI 3.2Journal of Structural Geology
Mechanics of MaterialsEngineering
10
논문|인용수 34·2020
Analysis of shale property changes after geochemical interaction under CO2 sequestration conditionsChae-Soon Choi, Jineon Kim, Jae-Joon Song
SJR Q1FWCI 1.1Energy
Environmental EngineeringEnvironmental Science
11
논문|인용수 31·2023
A Comprehensive Experimental Study on Mechanical Anisotropy and Failure Mode of 3D Printed Gypsum Rocks: From Composition and Microstructure to Macroscopic Mechanical Properties ResponseYulong Shao, Jingwei Yang, Jineon Kim, Jae-Joon Song, Juhyuk Moon, Jianyong Han
SJR Q1FWCI 4.7Rock Mechanics and Rock Engineering
Civil and Structural EngineeringEngineering
12
논문|인용수 27·2023
Intelligent recognition and identification of fracture types and parameters for borehole images based on developed convolutional neural networks and post-processingCancan Liu, Jineon Kim, Jae-Joon Song, Xigui Zheng, Niaz Muhammad Shahani, Nasir Khan, Xiaowei Guo
SJR Q1FWCI 3.5Engineering Fracture Mechanics
Mechanical EngineeringEngineering
13
논문|인용수 25·2024
Experimental investigation of the coupled effects of bedding planes and flaws on fracture evolution of soft bedded rocks based on 3D printing and DIC technologiesYulong Shao, Jineon Kim, Chen He, Hong Yin, Seyedahmad Mehrishal, Chi Yao, Jae-Joon Song
SJR Q1FWCI 6.7Theoretical and Applied Fracture Mechanics
Mechanics of MaterialsEngineering
14
논문|인용수 22·2005
Estimation of a joint diameter distribution by an implicit scheme and interpolation techniqueJae-Joon Song
SJR Q1FWCI 1.4International Journal of Rock Mechanics and Mining Sciences
Mechanical EngineeringEngineering
15
논문|인용수 21·2020
Equivalent Pore Channel Model for Fluid Flow in Rock Based on Microscale X-ray CT ImagingChae-Soon Choi, Yong-Ki Lee, Jae-Joon Song
SJR Q2FWCI 2.2MaterialsOA
Pore-scale modeling with a reconstructed rock microstructure has become a dominant technique for fluid flow characterization in rock thanks to technological improvements in X-ray computed tomography (CT) imaging. A new method for the construction of a pore channel model from micro-CT image analysis is suggested to improve computational efficiency by simplifying a highly complex pore structure. Ternary segmentation was applied through matching a pore volume experimentally measured by mercury intr
Ocean EngineeringEngineering
대표 연구 분야
Mechanics of MaterialsCivil and Structural EngineeringEnvironmental EngineeringMechanical EngineeringGeologyManagement, Monitoring, Policy and Law
송재준 교수의 연구를 Nubint에서 더 깊이 살펴보세요
이 연구실의 논문을 앱에서 열어 AI와 함께 읽고, 핵심을 요약하고, 내 글에 인용하세요.