Skip to main content

정인호 교수

Jung, In-Ho

서울대학교 Department of Materials Science and Engineering · 공학

연구실 소개

정인호 교수의 연구실은 철강 및 세라믹 재료의 열역학적 거동을 정밀하게 예측하기 위해 고도화된 컴퓨터 기반 열역학 데이터베이스를 구축하고 있습니다. 주로 철, 슬래그, 산화물 상 등 다성분계에서의 상평형과 열역학적 거동을 모델링하며, 특히 2차 철강제련 조건에서의 포함상 형성과 반응 메커니즘을 해석하는 데 초점을 맞추고 있습니다. 응용 분야로는 고순도 철강의 품질 제어 및 내재성 제어를 위한 열역학적 설계가 포함됩니다.

열역학 데이터베이스슬래그 열역학철강 제련포함상 예측다성분 상계

연구 현황

논문 수
407
총 인용 수
13,698
최근 5년 논문
63
주요 분야
공학

연구 성과 추이

표시된 성과는 수집된 데이터 기준으로 산출되며, 일부 차이가 있을 수 있습니다.

5개년 연도별 논문 게재 수
63총합
2022
2023
2024
2025
2026
5개년 연도별 피인용 수
350총합
20222023202420252026

주요 논문

15
1
논문|인용수 270·2015
Role of RE in the deformation and recrystallization of Mg alloy and a new alloy design concept for Mg–RE alloys
In‐Ho Jung, Mehdi Sanjari, Jung Hwan Kim, Stephen Yue
SJR Q1FWCI 10.7Scripta Materialia
BiomaterialsMaterials Science
2
논문|인용수 190·2020
Computational Thermodynamic Calculations: FactSage from CALPHAD Thermodynamic Database to Virtual Process Simulation
In‐Ho Jung, Marie‐Aline Van Ende
SJR Q2FWCI 10.2Metallurgical and Materials Transactions BOA
Mechanical EngineeringEngineering
3
논문|인용수 179·2004
A thermodynamic model for deoxidation equilibria in steel
In‐Ho Jung, Sergei A. Decterov, Arthur D. Pelton
SJR Q2FWCI 10.1Metallurgical and Materials Transactions B
Mechanical EngineeringEngineering
4
논문|인용수 147·2004
Critical thermodynamic evaluation and optimization of the CaO–MgO–SiO2 system
In‐Ho Jung, Sergei A. Decterov, Arthur D. Pelton
SJR Q1FWCI 5.0Journal of the European Ceramic Society
Mechanical EngineeringEngineering
5
논문|인용수 146·2004
Critical thermodynamic evaluation and optimization of the MgO-Al2O3, CaO-MgO-Al2O3, and MgO-Al2O3-SiO2 Systems
In‐Ho Jung, Sergei A. Decterov, Arthur D. Pelton
SJR Q2FWCI 6.5Journal of Phase Equilibria and Diffusion
Mechanical EngineeringEngineering
6
논문|인용수 146·2004
Computer Applications of Thermodynamic Databases to Inclusion Engineering
In‐Ho Jung, Sergei A. Decterov, Arthur D. Pelton
SJR Q2FWCI 5.0ISIJ InternationalOA

Computerized thermodynamic databases for solid and liquid steel, slags and solid oxide solutions, for large numbers of components, have been developed over the last two decades by critical evaluation/optimization of all available phase equilibrium and thermodynamic data. The databases contain parameters of models specifically developed for molten slags; liquid and solid steel; and solid oxide solutions such as spinels. With user friendly software, which accesses these databases, complex equilibr

Mechanical EngineeringEngineering
7
논문|인용수 133·2007
Thermodynamic modeling of the Mg–Si–Sn system
In‐Ho Jung, Daehoon Kang, Woojin Park, Nack J. Kim, Sang‐Ho Ahn
SJR Q2FWCI 137.6Calphad
Aerospace EngineeringEngineering
8
논문|인용수 118·2010
Overview of the applications of thermodynamic databases to steelmaking processes
In‐Ho Jung
SJR Q2FWCI 5.1Calphad
Mechanical EngineeringEngineering
9
논문|인용수 106·2006
Critical evaluation and thermodynamic modeling of the Mn–Cr–O system for the oxidation of SOFC interconnect
In‐Ho Jung
SJR Q2FWCI 5.6Solid State Ionics
Mechanical EngineeringEngineering
10
논문|인용수 105·2009
Thermodynamic Modeling of the Al2O3–Ti2O3–TiO2 System and Its Applications to the Fe–Al–Ti–O Inclusion Diagram
In‐Ho Jung, G. Eriksson, Ping Wu, Arthur D. Pelton
SJR Q2FWCI 4.0ISIJ InternationalOA

All available thermodynamic and phase diagram data have been critically evaluated and optimized for the liquid slag phase and for all solid phases at 1 bar pressure from 298 K to above the liquidus temperatures for the systems Al2O3–TiO2, Al2O3–Ti2O3, and Al2O3–Ti2O3–TiO2, and a database of model parameters has been prepared. The Modified Quasichemical Model was employed for the molten oxide phase. The thermodynamic modeling predicts the existence of a liquid oxide Al2O3–Ti2O3–TiO2 phase at seco

Mechanical EngineeringEngineering
11
논문|인용수 94·2012
Critical thermodynamic evaluation and optimization of the Fe–B, Fe–Nd, B–Nd and Nd–Fe–B systems
Marie‐Aline Van Ende, In‐Ho Jung
SJR Q1FWCI 5.9Journal of Alloys and Compounds
Mechanical EngineeringEngineering
12
논문|인용수 94·2016
A Kinetic Ladle Furnace Process Simulation Model: Effective Equilibrium Reaction Zone Model Using FactSage Macro Processing
Marie‐Aline Van Ende, In‐Ho Jung
SJR Q2FWCI 5.1Metallurgical and Materials Transactions B
Mechanical EngineeringEngineering
13
논문|인용수 87·2017
Critical reassessment of the Fe-Si system
Senlin Cui, In‐Ho Jung
SJR Q2FWCI 5.5Calphad
Mechanical EngineeringEngineering
14
논문|인용수 86·2013
Investigation of anisotropic diffusion behavior of Zn in hcp Mg and interdiffusion coefficients of intermediate phases in the Mg–Zn system
Sazol Kumar Das, Young‐Min Kim, Tae Kwon Ha, In‐Ho Jung
SJR Q2FWCI 5.0Calphad
BiomaterialsMaterials Science
15
논문|인용수 86·2004
Thermodynamic evaluation and optimization of the MnO-Al2O3 and MnO-Al2O3-SiO2 systems and applications to inclusion engineering
In‐Ho Jung, Youn‐Bae Kang, Sergei A. Decterov, Arthur D. Pelton
SJR Q2FWCI 0.7Metallurgical and Materials Transactions BOA
Mechanical EngineeringEngineering

대표 연구 분야

Mechanical EngineeringBiomaterialsAerospace EngineeringMaterials ChemistryCondensed Matter PhysicsCeramics and Composites

정인호 교수의 연구를 Nubint에서 더 깊이 살펴보세요

이 연구실의 논문을 앱에서 열어 AI와 함께 읽고, 핵심을 요약하고, 내 글에 인용하세요.