Seoul National University · 工学
Professor Shin Hyung Rhee's research lab specializes in computational fluid dynamics (CFD) applications in naval and marine hydrodynamics, focusing on ship resistance, propulsion, and propeller performance. The lab develops advanced CFD tools—such as the open-source SNUFOAM solver—tailored for complex free-surface and cavitating flows, with strong emphasis on accurate interface tracking and turbulence modeling. Research spans from fundamental flow simulations to practical ship performance prediction, including self-propulsion and maneuverability studies using hybrid meshing and validated numerical methods. The lab actively bridges computational innovation with experimental validation, particularly for marine vehicles and underwater systems.
Figures are computed from collected data and may differ slightly.
The present study is concerned with liquid tank sloshing at low filling level conditions. The volume of fluid method implemented in a Navier–Stokes computational fluid dynamics code is employed to handle the free-surface flow of liquid sloshing. The geometric reconstruction scheme for the interface representation is employed to ensure sharpness at the free surface. The governing equations are discretized by second order accurate schemes on unstructured grids. Several different computational appr
The cavitating flow around a marine propeller is studied using an unstructured grid based Reynolds-averaged Navier-Stokes computational fluid dynamics method. A cavitation model based on a single-fluid multi-phase flow method is implemented in the Navier-Stokes solver. The proposed computational approach for cavitation is validated against a benchmark database for a cavitating hydrofoil as well as measured data for a cavitating marine propeller. The leading edge and mid-chord cavitation on the h
In the present study, we conducted resistance test, propeller open water test and self-propulsion test for a ship's resistance and propulsion performance, using computational fluid dynamics techniques, where a Reynolds-averaged Navier-Stokes equations solver was employed. For convenience of mesh generation, unstructured meshes were used in the bow and stern region of a ship, where the hull shape is formed of delicate curved surfaces. On the other hand, structured meshes were generated for the mi
Results of computational fluid dynamics validation for flow around a marine propeller are presented. Computations were performed for various advance ratios following experimental conditions. The objectives of the study are to propose and verify a hybrid mesh generation strategy and to validate computational results against experimental data with advanced computational fluid dynamics tools. Computational results for both global and local flow quantities are discussed and compared with experimenta
X-plane submarines show better maneuverability as they have much longer span of control plane than that of cross plane submarines. In this study, captive model tests were conducted to evaluate the maneuverability of an X-plane submarine using Computational Fluid Dynamics (CFD) and a mathematical maneuvering model. For CFD analysis, SNUFOAM, CFD software specialized in naval hydrodynamics based on the open-source toolkit, OpenFOAM, was applied. A generic submarine Joubert BB2 was selected as a te
A computational fluid dynamics (CFD) code, dubbed SNUFOAM, was developed to predict the performance of ship resistance using a CFD tool kit with open source libraries. SNUFOAM is based on a pressure-based cell-centered finite volume method and includes a turbulence model with wall functions. The mesh sensitivity, such as the skewness and aspect ratio, was evaluated for the convergence. Two wall functions were tested to solve the turbulent flow around a ship, and the one without the assumption of
One of the most critical issues in naval architecture these days is the operational safety. Among many factors to be considered for higher safety level requirements, the hull stability in intact and damaged conditions is the first to ensure for both commercial and military vessels. Unlike the intact stability cases, the assessment of the damaged ship stability is very complicated physical phenomena. Therefore it is widely acknowledged that computational fluid dynamics (CFD) methods are one of mo
A three-dimensional Reynolds averaged Navier-Stokes method for unsteady turbulent flow around a maneuvering vehicle was developed and applied to a model problem concerning an extreme case of submarine maneuvers. A body force term is added in the momentum equations to take into account the inertial motion in the body-fixed coordinate system. The Spalart and Allmaras turbulence model is employed for turbulence closure. An artificial compressibility is introduced into the continuity equation for ve
Open papers in the app to read, cite, and organize with AI.
