Yuhei Hayamizu

Self-assembly of biological molecules on solid materials is central to the "bottom-up" approach to directly integrate biology with electronics. Inspired by biology, exquisite biomolecular nanoarchitectures have been formed on solid surfaces. We demonstrate that a combinatorially-selected dodecapeptide and its variants self-assemble into peptide nanowires on two-dimensional nanosheets, single-layer graphene and MoS₂. The abrupt boundaries of nanowires create electronic junctions via sp

A laser with an active volume consisting of only a single-quantum wire in the one-dimensional (1D) ground state is demonstrated. The single wire is formed quantum mechanically at the T-shaped intersection of a 14 nm Al0.07Ga0.93As quantum well and a 6 nm GaAs quantum well, and is embedded in a 1D single-mode optical waveguide. We observe single-mode lasing from the quantum-wire ground state by optical pumping. The laser operates from 5 to 60 K, and has a low threshold pumping power of 5 mW at 5

Optical gain and the Mott transition in GaAs quantum wires were studied via simultaneous measurements of absorption and photoluminescence (PL). We observed well-separated PL peaks assigned to excitons (X) and biexcitons (XX) even at densities where optical gain existed. A sharp optical gain first appeared when the XX peak overtook the X peak, indicating the gain origin of biexciton-exciton population inversion. The XX peak eventually changed to a broad peak of plasma, and a broad gain due to pla

Self-assembled peptides have revealed uniform ordering on two-dimensional (2D) materials such as mica, graphene, and MoS₂ so far. These peptides are expected to be utilized as a molecular scaffold for biosensing based on 2D materials. However, the stability of the peptide structures on 2D materials under liquid has not been evaluated, and some of the previously reported peptides may have instability under water. In this work, by mimicking an amino-acid sequence of silk protein, we suc

Arg (R)-rich dipeptide repeat proteins (DPRs; poly(PR): Pro-Arg and poly(GR): Gly-Arg), encoded by a hexanucleotide expansion in the C9ORF72 gene, induce neurodegeneration in amyotrophic lateral sclerosis (ALS). Although R-rich DPRs undergo liquid-liquid phase separation (LLPS), which affects multiple biological processes, mechanisms underlying LLPS of DPRs remain elusive. Here, using in silico, in vitro, and in cellulo methods, we determined that the distribution of charged Arg residues regulat

Gas sensing based on graphene field-effect transistors (GFETs) has gained broad interest due to their high sensitivity. Further progress in gas sensing with GFETs requires to detection of various odor molecules for applications in the environmental monitoring, healthcare, food, and cosmetic industries. To develop the ubiquitous odor-sensing system, establishing an artificial sense of smell with electronic devices by mimicking olfactory receptors will be key. Although the application of olfactory

To demonstrate the potential for microelectromechanical systems, nanotube beams composed from self-assembled closely packed and aligned single-walled carbon nanotubes were fabricated and their mechanical properties were measured. We found that the nanotube beams behave as a cohesive, rigid, and elastic body with a sound velocity of 10,100 m/s.

This laser induced electrochemical thinning is active for multiple layers but not for single-layer MoS₂.

Chiral recognition of peptides on solid surfaces has been studied for a better understanding of their assembly mechanism toward its applications in stereochemistry and enantioselective catalysis. However, moving from small peptides such as dipeptides, understanding the chiral recognition of larger biomolecules such as oligopeptides or peptides with a larger sequence is challenging. Furthermore, their intrinsic mechanism for chiral recognition in liquid conditions was poorly investigated experime

The liquid–liquid phase separation (LLPS) of proteins and RNA molecules has emerged in recent years as an important physicochemical process to explain the organization of membrane-less organelles in living cells and cellular functions and even some fatal neurodegenerative diseases, such as Amyotrophic Lateral Sclerosis (ALS) due to the spontaneous condensation and growth of LLPS droplets. In general, the characterization of LLPS droplets has been performed by optical microscopy, where we need tr

Sequential-assembly of LEY and GrBP5 peptides on a graphite surface.

Dipeptide repeat proteins (DRPs) are considered a significant cause of amyotrophic lateral sclerosis (ALS), and their liquid-liquid phase separation (LLPS) formation with other biological molecules has been studied both in vitro and in vivo. The immobilization and wetting of the LLPS droplets on glass surfaces are technically crucial for the measurement with optical microscopy. In this work, we characterized the surface diffusion of LLPS droplets of the DRPs with different lengths to investigate

Replicating the sense of smell presents an ongoing challenge in the development of biomimetic devices. Olfactory receptors exhibit remarkable discriminatory abilities, including the enantioselective detection of individual odorant molecules. Graphene has emerged as a promising material for biomimetic electronic devices due to its unique electrical properties and exceptional sensitivity. However, the efficient detection of nonpolar odor molecules using transistor-based graphene sensors in a gas p

Biosensors with two-dimensional materials have gained wide interest due to their high sensitivity. Among them, single-layer MoS₂ has become a new class of biosensing platform owing to its semiconducting property. Immobilization of bioprobes directly onto the MoS₂ surface with chemical bonding or random physisorption has been widely studied. However, these approaches potentially cause a reduction of conductivity and sensitivity of the biosensor. In this work, we designed pep