Jin Gon Kim

A double-layered nanoporous membrane suitable for virus filtration has been fabricated. The top layer has cylindrical pores with diameters of 15 nm and a narrow pore size distribution (see figure). The bottom support layer is a conventional microfiltration membrane. This asymmetric membrane completely blocks human rhinovirus type 14 (colored green) from penetrating into pores, while proteins such as bovine serum albumin (colored yellow) freely pass through the pores.

Abstract Fe 3 O 4 nanocrystals confined in mesocellular carbon foam (MSU‐F‐C) are synthesized by a “ host–guest ” approach and tested as an anode material for lithium‐ion batteries (LIBs). Briefly, an iron oxide precursor, Fe(NO 3 ) 3 ·9H 2 O, is impregnated in MSU‐F‐C having uniform cellular pores ∼30 nm in dia­meter, followed by heat‐treatment at 400 °C for 4 h under Ar. Magnetite Fe 3 O 4 nanocrystals with sizes between 13–27 nm are then successfully fabricated inside the pores of the MSU‐F‐C

The effect of organoclay platelets on morphologies of three blend compositions (80/20, 20/80, and 99.5/0.5 w/w) of nylon-6 (N6) and poly(ethylene- ran -propylene) rubber (EPR) has been studied by scanning and transmission electron micrographs. For the 80/20 (w/w) N6/ERP blend, the dispersed domain size ( D ) of EPR phase in the N6 matrix decreased significantly even if a small amount of the organoclay was added. The extent of the decrease in D in this blend was similar to N6/EPR blend with an in

We introduce a simple but robust method to fabricate an ultrahigh-density array of silver nanoclusters for a surface-enhanced Raman spectroscopy (SERS) substrate with high sensitivity and excellent reproducibility at a very large area (wafer scale) based on polystyrene-block-poly(4-vinylpyridine) copolymer (PS-b-P4VP) micelles. After silver nitrates were incorporated into the micelle cores (P4VP) followed by the reduction to silver nanoclusters, we systematically controlled the gap distance betw

Abstract A mesostructured spinel Li 4 Ti 5 O 12 (LTO)‐carbon nanocomposite (denoted as Meso‐LTO‐C) with large (>15 nm) and uniform pores is simply synthesized via block copolymer self‐assembly. Exceptionally high rate capability is then demonstrated for Li‐ion battery (LIB) negative electrodes. Polyisoprene‐ block ‐poly(ethylene oxide) (PI‐ b ‐PEO) with a sp 2 ‐hybridized carbon‐containing hydrophobic block is employed as a structure‐directing agent. Then the assembled composite material is c

Abstract We introduce a nanoporous membrane suitable for virus filtration with good dimensional stability under high pressures maintaining high selectivity. The membrane consists of a double layer: The upper layer is a nanoporous film with pore size of ∼17 nm and a thickness of ∼160 nm, which was prepared by polystyrene‐ block ‐poly(methyl methacrylate) copolymer (PS‐ b ‐PMMA) where PMMA block was removed by ultraviolet irradiation followed by rinsing with acetic acid. The nanoporous block copol

Abstract Electronics wastes (e‐wastes) are the major concern in the rapid expansion of smart/wearable/portable electronics in modern high‐tech society. Informal processing and enormous gathering of e‐wastes can lead to adverse human/animal health effects and environmental pollution worldwide. Currently, these issues are a big headache and require the scientific community to develop effective green energy harvesting technologies using biodegradable/biocompatible materials. Piezoelectric/triboelec

Abstract A structured polymer solar cell architecture featuring a large interface between donor and acceptor with connecting paths to the respective electrodes is explored. To this end, poly‐(3‐hexylthiophene) (P3HT) nanorods oriented perpendicularly to indium tin oxide (ITO) glass are fabricated using an anodic aluminum oxide template. It is found that the P3HT chains in bulk films or nanorods are oriented differently; perpendicular or parallel to the ITO substrate, respectively. Such chain ali

We report on the fabrication of electrically responsive nanoporous membrane based on polypyrrole doped with dodecylbenzenesulfonate anion (PPy/DBS) that was electropolymerized on the upper part of anodized aluminum oxide membrane. The membrane has regular pore size and very high pore density. Utilizing a large volume change of PPy/DBS depending on electrochemical state, the pore size was acutated electrically. The actuation of the pores was experimentally confirmed by in situ atomic force micros

A new drug delivery device using cylindrical block copolymer nanochannels was successfully developed for controlled protein drug delivery applications. Depending on the hydrodynamic diameter of the protein drugs, the pore size in cylindrical nanochannels could be controlled precisely down to 6 nm by Au deposition. Zero-order release of bovine serum albumin (BSA) and human growth hormone (hGH) by single-file diffusion, which has been observed for gas diffusion through zeolite pores, was realized

Abstract Electric devices has become a necessity in modern smart societies. The energy research community is continually exploring new solutions that can be employed as potential and reliable alternatives to satisfy future energy requirements in this context. Triboelectric/piezoelectric nanogenerators (TNGs/PNGs) are considered promising renewable energy harvesting technologies. TNGs/PNGs are gaining considerable research attention because of their advantages such as ease of fabrication, cost ef

We introduce a novel method for fabricating breath figure patterns on a homopolymer film by spin coating of polymer solutions with various solvents. The homopolymers employed in this study were cellulose acetate butyrate, monocarboxylated end-functional polystyrene, and poly(methyl methacrylate). Breath figure patterns were generated even when a water-miscible solvent such as tetrahydrofuran (THF) was used as a solvent. We even succeeded in generating breath figure patterns by spin coating even