Jong-Baeck Kim
Yonsei University
研究室紹介
Professor Jong-Baeck Kim's research group specializes in precision measurements in heavy flavor physics, focusing on B-meson decays involving tau leptons and charmed mesons. Their work centers on testing the Standard Model through measurements of branching fraction ratios, such as R(D*) and R(D), and studying tau lepton polarization, which are sensitive probes for new physics beyond the Standard Model. The lab utilizes high-statistics data samples from the Belle experiment at the KEKB e⁺e⁻ collider, particularly near the Υ(4S) and Υ(5S) resonances, to explore exotic hadronic states and rare decay processes.
Research Overview
Research Output Trend
Figures are computed from collected data and may differ slightly.
Selected Papers
4This paper presents an experimental investigation of the dynamic force performance of gas foil bearings (GFBs) at high temperatures. A dynamic performance test rig with a GFB mounted on a rotating hollow shaft, heated by a cartridge heater inside the hollow shaft, andexcited by two orthogonally positioned electromagnetic shakers determines the frequency dependent stiffness and damping coefficientsof the test GFB for increasing shaft temperatures. The test heater temperatures are 21°C (room tempe
In this study, we demonstrated a triboelectric nanogenerator composed of a vertical column, and a cylindrical shell, for omnidirectional wind energy harvesting. With a simple structure using a metal wire, the height between the two triboelectric materials can be maintained, and the Al coated shell can also be electrically connected to the electrode. When the shell is deformed by wind, its Al layer and Polytetrafluoroethylene (PTFE) on the outside of the column can be triboelectrically charged. T
본 연구의 목적은 첫째 마찰 시 직물의 면적을 증가시켜 에너지 수확의 효율을 높일 수 있는 입체 자수 기법 및 전도성 직물 재료를 탐색하고, 둘째 높은 효율을 보이는 입체 자수 기법을 토대로 브러싱 가공을 실시하여 가공 후의 발생 전압을 분석하며, 셋째 이를 근거로 마찰 에너지 수확 증대형 직물의 구조를 탐색하는 것이다. 이를 위해 다음의 두 가지 실험을 실시하였다. “실험 Ⅰ”에서는 인체로부터 마찰 에너지를 수확하는 효율에 영향을 미치는 직물 내 주요 변인으로, 1) 입체 자수 기법(사틴 기법, 파일 기법), 2) 전도성 직물 재료(구리 기반 MPF, 니켈 기반 MPF)를 선정하고, 이 두 변인들의 조합에 따른 4개의 시료를 제작하여 마찰 시 발생 전압의 차이를 비교 분석하였다. “실험 Ⅱ”에서는 높은 효율을 보이는 입체 자수 방식의 시료를 대상으로 브러싱 가공을 실시하여 가공 후의 발생 전압을 분석하였다. 그 결과, 두 전도성 직물 재료 모두에 있어서 파일 자수 직물 구조가 사틴
A biosensor based on the measurement of capacitance changes has been designed and fabricated for simple and real-time detection of bacteria. Compared to an impedance measurement technique, the capacitance measurement can makeadditional measurement circuits simpler, which improves a compatability for integration between the sensor and circuit.The fabricated sensor was characterized by detecting Escherichia coli(E. coli). The capacitance changes measured by thesensor were proportional to E. coli c