Seung Woo Lee

This comprehensive Review focuses on the key challenges and recent progress regarding sodium-metal anodes employed in sodium-metal batteries (SMBs). The metal anode is the essential component of emerging energy storage systems such as sodium sulfur and sodium selenium, which are discussed as example full-cell applications. We begin with a description of the differences in the chemical and physical properties of Na metal versus the oft-studied Li metal, and a corresponding discussion regarding th

Abstract not Available.

Multiwall carbon nanotube (MWNT)/manganese oxide (MnO2) nanocomposite ultrathin film electrodes have been created via redox deposition of MnO2 on layer-by-layer (LbL)-assembled MWNT films. We demonstrate that these LbL-assembled MWNT (LbL-MWNT)/MnO2 thin films consist of a uniform coating of nanosized MnO2 on the MWNT network structure using SEM and TEM, which is a promising structure for electrochemical capacitor applications. LbL-MWNT/MnO2 electrodes yield a significantly higher volumetric cap

All multiwall carbon nanotube (MWNT) thin films are created by layer-by-layer (LBL) assembly of surface functionalized MWNTs. Negatively and positively charged MWNTs were prepared by surface functionalization, allowing the incorporation of MWNTs into highly tunable thin films via the LBL technique. The pH dependent surface charge on the MWNTs gives this system the unique characteristics of LBL assembly of weak polyelectrolytes, controlling thickness and morphology with assembly pH conditions. We

Access to nitrogen-based fertilizers is critical to maximize agricultural yield, as nitrogen is the most common rate-limiting nutrient. Nearly all nitrogen-based fertilizers rely on ammonia and nitric acid as feedstocks, and thus the demand for these chemicals is heavily dependent on the global population and food demand. Over the next three decades, the global population will continue to dictate the market size and value for ammonia and nitric acid, which consequently will have a significant im

The design of electrocatalysts capable of selectively reducing nitrate to ammonia is gaining interest as a means of transforming waste into fertilizers. However, most prior investigations of prototypical electrocatalysts, such as polycrystalline Pd and Pt, have focused on unraveling the mechanisms responsible for the selective reduction of nitrate to nitrogen gas. Such polycrystalline noble metals demonstrate notoriously low activity for nitrate reduction (nitrate to nitrite) and high activity f

Abstract The effective implantation of conductive and charge storage materials into flexible frames has been strongly demanded for the development of flexible supercapacitors. Here, we introduce metallic cellulose paper-based supercapacitor electrodes with excellent energy storage performance by minimizing the contact resistance between neighboring metal and/or metal oxide nanoparticles using an assembly approach, called ligand-mediated layer-by-layer assembly. This approach can convert the insu

Abstract Two dimensional (2D) nanomaterials are very attractive due to their unique structural and surface features for energy storage applications. Motivated by the recent pioneering works demonstrating “the emergent pseudocapacitance of 2D nanomaterials,” the energy storage and nanoscience communities could revisit bulk layered materials though state‐of‐the‐art nanotechnology such as nanostructuring, nanoarchitecturing, and compositional control. However, no review has focused on the fundament

The fast evolution of portable electronic devices and micro-electro-mechanical systems (MEMS) requires multi-functional microscale energy sources that have high power, high energy, long cycle life, and the adaptability to various substrates. Nanostructured thin-film lithium-ion batteries and electrochemical capacitors (ECs) are among the most promising energy storage devices that can meet these demands. This perspective presents an overview of recent progresses and challenges associated with the

Transition-metal oxide and phosphate materials, commonly used for lithium battery devices, are active as oxygen evolution reaction (OER) catalysts under alkaline and neutral solution conditions. Electrodes composed of LiCoO(2) and LiCoPO(4) exhibit progressive deactivation and activation for OER catalysis, respectively, upon potential cycling at neutral pH. The deactivation of LiCoO(2) and activation of LiCoPO(4) are coincident with changes in surface morphology and composition giving rise to sp

Redox-active, self-polymerized dopamine shows promise as organic cathode materials for Li- and Na-ion batteries.

The Li-binding thermodynamics and redox potentials of seven different quinone derivatives are investigated to determine their suitability as positive electrode materials for lithium-ion batteries. First, using density functional theory (DFT) calculations on the interactions between the quinone derivatives and Li atoms, we find that the Li atoms primarily bind with the carbonyl groups in the test molecules. Next, we observed that the redox properties of the quinone derivatives can be tuned in the

Abstract Sodium‐metal batteries (SMBs) are considered as a compliment to lithium‐metal batteries for next‐generation high‐energy batteries because of their low cost and the abundance of sodium (Na). Herein, a 3D nanostructured porous carbon particle containing carbon‐shell‐coated Fe nanoparticles (PC‐CFe) is employed as a highly reversible Na‐metal host. PC‐CFe has a unique 3D hierarchy based on sub‐micrometer‐sized carbon particles, ordered open channels, and evenly distributed carbon‐coated Fe

Abstract To achieve excellent photoelectrochemical water‐splitting activity, photoanode materials with high light absorption and good charge‐separation efficiency are essential. One effective strategy for the production of materials satisfying these requirements is to adjust their band structure and corresponding bandgap energy by introducing oxygen vacancies. A simple chemical reduction method that can systematically generate oxygen vacancies in barium stannate (BaSnO 3 (BSO)) crystal is introd