Skip to main content

Yun-Sang Lee

Hanyang University · 工学

研究室紹介

Professor Yun-Sang Lee's research lab specializes in biomechanics and robotics, focusing on the development of advanced control systems for dynamic, human-like locomotion in humanoid and multilegged robots. The lab integrates data-driven methods, model-predictive control, and biomechanically accurate muscle modeling to enable realistic, stable, and adaptive motion generation under various physical constraints and perturbations. Key research directions include under-actuated full-body biped control, terrain-adaptive gait planning, and the simulation of human gait for rehabilitation and assistive robotics. The lab also explores physical separation techniques in molten salts, demonstrating a multidisciplinary approach bridging robotics, computational biomechanics, and materials science.

biped locomotionmodel-predictive controlmuscle modelingmotion capturedynamic simulation

Research Overview

Papers
53
Total Citations
474
Papers (5y)
26
Primary Field
工学

Research Output Trend

Figures are computed from collected data and may differ slightly.

Publications per year (5y)
26total
2022
2023
2024
2025
2026
Citations per year (5y)
32total
20222023202420252026

Selected Papers

15
1
Article|162 citations·2010
Data-driven biped control
Yoonsang Lee, Sung‐Eun Kim, Jehee Lee
SJR Q1ACM Transactions on Graphics

We present a dynamic controller to physically simulate under-actuated three-dimensional full-body biped locomotion. Our data-driven controller takes motion capture reference data to reproduce realistic human locomotion through realtime physically based simulation. The key idea is modulating the reference trajectory continuously and seamlessly such that even a simple dynamic tracking controller can follow the reference trajectory while maintaining its balance. In our framework, biped control can

Control and Systems EngineeringEngineering
2
Article|97 citations·2014
Locomotion control for many-muscle humanoids
Yoonsang Lee, Moon Seok Park, Taesoo Kwon, Jehee Lee
SJR Q1ACM Transactions on Graphics

We present a biped locomotion controller for humanoid models actuated by more than a hundred Hill-type muscles. The key component of the controller is our novel algorithm that can cope with step-based biped locomotion balancing and the coordination of many nonlinear Hill-type muscles simultaneously. Minimum effort muscle activations are calculated based on muscle contraction dynamics and online quadratic programming. Our controller can faithfully reproduce a variety of realistic biped gaits (e.g

Control and Systems EngineeringEngineering
3
Article|56 citations·2010
Data-driven biped control
Yoonsang Lee, Sung‐Eun Kim, Jehee Lee

We present a dynamic controller to physically simulate under-actuated three-dimensional full-body biped locomotion. Our data-driven controller takes motion capture reference data to reproduce realistic human locomotion through realtime physically based simulation. The key idea is modulating the reference trajectory continuously and seamlessly such that even a simple dynamic tracking controller can follow the reference trajectory while maintaining its balance. In our framework, biped control can

Control and Systems EngineeringEngineering
4
Article|47 citations·2020
Fast and flexible multilegged locomotion using learned centroidal dynamics
Taesoo Kwon, Yoonsang Lee, Michiel van de Panne
SJR Q1ACM Transactions on Graphics

We present a flexible and efficient approach for generating multilegged locomotion. Our model-predictive control (MPC) system efficiently generates terrain-adaptive motions, as computed using a three-level planning approach. This leverages two commonly-used simplified dynamics models, an inverted pendulum on a cart model (IPC) and a centroidal dynamics model (CDM). Taken together, these ensure efficient computation and physical fidelity of the resulting motion. The final full-body motion is gene

Control and Systems EngineeringEngineering
5
Article|20 citations·2015
Push-recovery stability of biped locomotion
Yoonsang Lee, Kyungho Lee, Soon-Sun Kwon, Jiwon Jeong, Carol O’Sullivan, Moon Seok Park, Jehee Lee
SJR Q1ACM Transactions on Graphics

Biped controller design pursues two fundamental goals; simulated walking should look human-like and robust against perturbation while maintaining its balance. Normal gait is a pattern of walking that humans normally adopt in undisturbed situations. It has previously been postulated that normal gait is more energy efficient than abnormal or impaired gaits. However, it is not clear whether normal gait is also superior to abnormal gait patterns with respect to other factors, such as stability. Unde

Biomedical EngineeringEngineering
6
Article|18 citations·2009
Concentrations of CsCl and SrCl2from a Simulated LiCl Salt Waste Generated by Pyroprocessing by Using Czochralski Method
Han-Soo Lee, Gyu-Hwan OH, Yoonsang Lee, In-Tae Kim, Eung-Ho Kim, Jong‐Hyeon Lee
SJR Q2Journal of Nuclear Science and Technology

Separation of CsCl and SrCl2 from LiCl was carried out by using a separation technology, the Czochralski crystallization method. It was experimentally confirmed that Cs as well as Sr could be separated simultaneously from a LiCl molten salt by the suggested crystallization process without any additive or adsorption medium. The concentrations of Cs and Sr in LiCl decreased from 1.81 and 4.18 wt% in the initial salt to minimum values of 114 and 36 ppm in the grown LiCl crystal, respectively. The s

Fluid Flow and Transfer ProcessesChemical Engineering
7
Article|11 citations·2021
Finite State Machine-Based Motion-Free Learning of Biped Walking
Gyoo-Chul Kang, Yoonsang Lee
SJR Q1IEEE AccessOA

Recently, deep reinforcement learning (DRL) is commonly used to create controllers for physically simulated characters. Among DRL-based approaches, imitation learning for character control using motion capture clips as tracking references has shown successful results in controlling various motor skills with natural movement. However, the output motion tends to be constrained close to the reference motion, and thus the learning of various styles of motion requires many motion clips. In this paper

Control and Systems EngineeringEngineering
8
Article|8 citations·2011
Design of remote control system for data protection and backup in mobile devices
Inwhee Joe, Yoonsang Lee
International Conference on Information Systems

Performance upgrades for mobile devices took place due to jumping development of technology, so high-performance terminals that anyone can directly search and amend desired information anywhere and anytime, namely, mobile communication terminals called Smartphone were released to the market. Such terminals can store information that an individual saved, for example, call log, where to make contact and address of acquaintances, transmit/receive message and mail, photographs and videos, etc., but

Hardware and ArchitectureComputer Science
9
Article|7 citations·2023
Dimensional emotions are represented by distinct topographical brain networks
Yoonsang Lee, Yeji Seo, Young-Ju Lee, Dongha Lee
SJR Q1International Journal of Clinical and Health PsychologyOA

The ability to recognize others' facial emotions has become increasingly important after the COVID-19 pandemic, which causes stressful situations in emotion regulation. Considering the importance of emotion in maintaining a social life, emotion knowledge to perceive and label emotions of oneself and others requires an understanding of affective dimensions, such as emotional valence and emotional arousal. However, limited information is available about whether the behavioral representation of aff

Cognitive NeuroscienceNeuroscience
10
Article|6 citations·2013
Fundamental study on electron beam weld sections and strengths using AA6061-T6 aluminum alloy plate
Soo-sung Kim, Yong-Jin Jeong, Jong‐Man Park, Yoonsang Lee
SJR Q2Journal of Mechanical Science and Technology
Mechanical EngineeringEngineering
11
Article|5 citations·2022
Understanding the stability of deep control policies for biped locomotion
Hwangpil Park, Ri Yu, Yoonsang Lee, Kyungho Lee, Jehee Lee
SJR Q2The Visual Computer
Control and Systems EngineeringEngineering
12
Article|4 citations·2010
Data-driven biped control
Yoonsang Lee, Sungeun Kim, Jehee Lee
SJR Q1ACM Transactions on Graphics

We present a dynamic controller to physically simulate under-actuated three-dimensional full-body biped locomotion. Our data-driven controller takes motion capture reference data to reproduce realistic human locomotion through realtime physically based simulation. The key idea is modulating the reference trajectory continuously and seamlessly such that even a simple dynamic tracking controller can follow the reference trajectory while maintaining its balance. In our framework, biped control can

Control and Systems EngineeringEngineering
13
Article|4 citations·2023
Adaptive Tracking of a Single-Rigid-Body Character in Various Environments
Taesoo Kwon, Taehong Gu, Jaewon Ahn, Yoonsang Lee
OA

Since the introduction of DeepMimic [Peng et al. 2018a], subsequent research has focused on expanding the repertoire of simulated motions across various scenarios. In this study, we propose an alternative approach for this goal, a deep reinforcement learning method based on the simulation of a single-rigid-body character. Using the centroidal dynamics model (CDM) to express the full-body character as a single rigid body (SRB) and training a policy to track a reference motion, we can obtain a pol

Control and Systems EngineeringEngineering
14
Article|4 citations·2000
An investigation on the green properties of U-10wt.%Mo/Al and U3Si2/Al powder compacts
Young‐Soo Han, Jong‐Man Park, Ki‐Hwan Kim, Yoonsang Lee, Chang‐Kyu Kim
SJR Q1Nuclear Engineering and Design
Materials ChemistryMaterials Science
15
Article|4 citations·2022
Real-time Interactive Animation System for Low-Priced Motion Capture Sensors
Jeongho Kim, Daeun Kang, Yoonsang Lee, Taesoo Kwon
Journal of the Korea Computer Graphics SocietyOA

In this paper, we introduce a novel real-time, interactive animation system which uses real-time motion inputs from a low-cost motion-sensing device Kinect. Our system generates interaction motions between the user character and the counterpart character in real-time. While the motion of the user character is generated mimicking the user’s input motion, the other character’s motion is decided to react to the user avatar’s motion. During a pre-processing step, our system analyzes the reference mo

Control and Systems EngineeringEngineering

Research Areas

Control and Systems EngineeringCognitive NeuroscienceBiomedical EngineeringMaterials ChemistryComputer Vision and Pattern RecognitionElectrical and Electronic Engineering

Yun-Sang Leeの研究をNubintでさらに深く

この研究室の論文をアプリで開き、AIと共に読み、要約し、引用しましょう。