민병권 교수
Byeongkwan Min
연세대학교 디지털융합엔지니어링학과 · 공학
연구실 소개
민병권 교수의 연구실은 전자기적 공정과 정밀가공 기술을 융합한 고성능 제조 시스템 개발을 주요 연구 분야로 삼고 있습니다. 특히 전기화학적 방전가공(ECDM)을 활용한 경도 높은 취약 재료의 마이크로 가공 기술과, 실시간 기계 공구 제어 시뮬레이션을 통한 가상 제조 환경의 정밀도 향상에 초점을 맞추고 있습니다. 또한 정밀가공 공정의 정밀도를 향상시키기 위해 구조적 설계와 제어 시스템을 통합한 지능형 가공 공구(예: 스마트 버닝 바)의 개발도 진행 중입니다.
ECDM마이크로가공실시간 시뮬레이션지능형 공구가상 제조
연구 현황
논문 수
185
총 인용 수
3,616
최근 5년 논문
26
주요 분야
공학
연구 성과 추이
표시된 성과는 수집된 데이터 기준으로 산출되며, 일부 차이가 있을 수 있습니다.
5개년 연도별 논문 게재 수
26총합
2022
2023
2024
2025
2026
5개년 연도별 피인용 수
166총합
20222023202420252026
주요 논문
151
논문|인용수 83·2007
A study on the fabrication of curved surfaces using magnetorheological fluid finishingJongwon Seok, Jin Hyoung Kim, Kyung‐In Jang, Byung-Kwon Min, Sang Jo Lee
SJR Q1International Journal of Machine Tools and Manufacture
Biomedical EngineeringEngineering
2
논문|인용수 69·2009
Deburring microfeatures using micro-EDMYoung Hun Jeong, Byung HanYoo, Han Ul Lee, Byung-Kwon Min, Dong‐Woo Cho, Sang Jo Lee
SJR Q1Journal of Materials Processing Technology
Electrical and Electronic EngineeringEngineering
3
논문|인용수 66·2011
Ploughing detection in micromilling processes using the cutting force signalHuitaek Yun, Segon Heo, Min Kyu Lee, Byung-Kwon Min, Sang Jo Lee
SJR Q1International Journal of Machine Tools and Manufacture
Mechanical EngineeringEngineering
4
논문|인용수 49·2017
Simulation-based machining condition optimization for machine tool energy consumption reductionWonkyun Lee, Seong Hyeon Kim, Jaesang Park, Byung-Kwon Min
SJR Q1Journal of Cleaner Production
Renewable Energy, Sustainability and the EnvironmentEnergy
5
논문|인용수 48·2022
Posture optimization in robotic drilling using a deformation energy modelJae Ho Lee, Seong Hyeon Kim, Byung-Kwon Min
SJR Q1Robotics and Computer-Integrated Manufacturing
Control and Systems EngineeringEngineering
6
논문|인용수 44·2011
Deburring microparts using a magnetorheological fluidKyung‐In Jang, Doo-Yeon Kim, Sangjin Maeng, Wonkyun Lee, Jungjin Han, Jongwon Seok, Tae‐Jin Je, Shinill Kang, Byung-Kwon Min
SJR Q1International Journal of Machine Tools and Manufacture
Biomedical EngineeringEngineering
7
논문|인용수 43·2011
Micro-electrochemical discharge cutting of glass using a surface-textured toolMin-Seop Han, Byung-Kwon Min, Sang Jo Lee
SJR Q1CIRP journal of manufacturing science and technology
Electrical and Electronic EngineeringEngineering
8
논문|인용수 43·2014
Simulation-based energy usage profiling of machine tool at the component levelWonkyun Lee, Chan-Young Lee, Byung-Kwon Min
SJR Q1International Journal of Precision Engineering and Manufacturing-Green TechnologyOA
Renewable Energy, Sustainability and the EnvironmentEnergy
9
논문|인용수 42·2010
An electrochemomechanical polishing process using magnetorheological fluidKyung‐In Jang, Jongwon Seok, Byung-Kwon Min, Sang Jo Lee
SJR Q1International Journal of Machine Tools and Manufacture
Atomic and Molecular Physics, and OpticsPhysics and Astronomy
10
논문|인용수 36·2009
Virtual EDM simulator: Three-dimensional geometric simulation of micro-EDM milling processesSegon Heo, Young Hun Jeong, Byung-Kwon Min, Sang Jo Lee
SJR Q1International Journal of Machine Tools and Manufacture
Electrical and Electronic EngineeringEngineering
11
논문|인용수 36·2017
Fabrication of high-aspect-ratio microgrooves using an electrochemical discharge micromilling processMin-Seop Han, Ki Woon Chae, Byung-Kwon Min
SJR Q2Journal of Micromechanics and Microengineering
In this study, we created high-aspect-ratio microgrooves in hard, brittle materials using an electrochemical discharge machining (ECDM) process by introducing microtextured machining tool. To enhance the electrical discharge activity, the morphology of the tool side surface was treated via micro-electrical discharge machining to produce fine microprotrusive patterns. The resulting microtextured surface morphology enhanced the electric field and played a key role in improving the step milling dep
Electrical and Electronic EngineeringEngineering
12
논문|인용수 34·2020
Identification of mass and sliding friction parameters of machine tool feed drive using recursive least squares methodChan-Young Lee, Soon-Hong Hwang, Eunseok Nam, Byung-Kwon Min
SJR Q1The International Journal of Advanced Manufacturing Technology
Control and Systems EngineeringEngineering
13
논문|인용수 31·2009
Prediction of nanopattern topography using two-dimensional focused ion beam milling with beam irradiation intervalsJin Han, Hiwon Lee, Byung-Kwon Min, Sang Jo Lee
SJR Q2Microelectronic Engineering
Electrical and Electronic EngineeringEngineering
14
논문|인용수 30·2004
Development of a padless ultraprecision polishing method using electrorheological fluidW.B. Kim, Byung-Kwon Min, S.J. Lee
SJR Q1Journal of Materials Processing Technology
Civil and Structural EngineeringEngineering
15
논문|인용수 29·2010
Motor current prediction of a machine tool feed drive using a component-based simulation modelYoung Hun Jeong, Byung-Kwon Min, Dong‐Woo Cho, Sang Jo Lee
SJR Q2International Journal of Precision Engineering and Manufacturing
Control and Systems EngineeringEngineering
대표 연구 분야
Mechanical EngineeringElectrical and Electronic EngineeringBiomedical EngineeringControl and Systems EngineeringCivil and Structural EngineeringIndustrial and Manufacturing Engineering
민병권 교수의 연구를 Nubint에서 더 깊이 살펴보세요
이 연구실의 논문을 앱에서 열어 AI와 함께 읽고, 핵심을 요약하고, 내 글에 인용하세요.