김대규엄 교수

Abstract The dynamics of an inverted flag are investigated experimentally in order to find the conditions under which self-excited flapping can occur. In contrast to a typical flag with a fixed leading edge and a free trailing edge, the inverted flag of our study has a free leading edge and a fixed trailing edge. The behaviour of the inverted flag can be classified into three regimes based on its non-dimensional bending stiffness scaled by flow velocity and flag length. Two quasi-steady regimes,

Several characteristics of drag-based paddling propulsion are studied with a simple mechanical model and a measurement technique for mapping three-dimensional flow fields. In drag-based propulsion, the temporal change of the vortex strength is an important parameter in the relationship between vortex formation and thrust generation. Our results indicate that spanwise flow behind the paddling propulsor significantly affects tip vortex development and thrust generation. The distribution of spanwis

Vortex structures made by impulsively translating low aspect-ratio plates are studied experimentally using defocusing digital particle image velocimetry. The investigation of translating plates with a 90° angle of attack is important since it is a fundamental model for a better understanding of drag-based propulsion systems. Rectangular flat-rigid, flexible and curved-rigid thin plates with the same aspect ratio are studied in order to develop qualitative and quantitative understanding of their

Abstract For the sustainable application of remote sensing and monitoring in the ocean environment, energy harvesting technology based on flow‐induced vibration is in the spotlight. Herein, based on the flow‐induced self‐excitation of an impacting‐sliding cylinder, a collectively exhaustive hybrid triboelectric nanogenerator (TENG) is reported, that utilizes both freestanding‐sliding (FS) and contact‐separation (CS) modes. Most importantly, the flow‐induced impacting cylinder (FIC) between two s

The application of an impinging sweeping jet, which oscillates periodically with a large angle, to convective heat transfer has received attention owing to its capability to provide a more spatially uniform and enhanced heat removal rate when compared to a steady jet. Herein, we study how the surface curvature affects the heat transfer performance of a sweeping jet and couple it with the representative flow characteristics . Heat transfer measurement and quantitative flow visualization are condu

Abstract Vortex formation and force generation of clapping plates with various aspect ratios ( $AR$ ) and stroke angles were investigated. Experiments were performed with a pair of hinged rectangular plates that were rotated symmetrically in a static fluid, and defocusing digital particle image velocimetry was employed to measure the three-dimensional flow field. Single-plate cases were also studied to compare with clapping plate cases. As $AR$ decreases, both circulation of the tip vortex and a