이동호 교수

Abstract Disassembly process planning is an act of preparing detailed operation instructions for disassembling used or an end-of-life (EOL) product to recover or dispose of its constituent parts or subassemblies. The main decisions are: (a) disassembly level; (b) disassembly sequence; and (c) EOL options such as reuse, remanufacturing, recycling, incineration, landfill, etc. This study deals with the three decision variables simultaneously in the parallel disassembly environment for the objectiv

This paper considers the job shop scheduling problem with alternative operations and machines, called the flexible job shop scheduling problem. As an extension of previous studies, operation and routing flexibilities are considered at the same time in the form of multiple process plans, i.e. each job can be processed through alternative operations, each of which can be processed on alternative machines. The main decisions are: (a) selecting operation/machine pair; and (b) sequencing the jobs ass

Disassembly scheduling, one of the important operational problems in disassembly systems, is the problem of determining the ordering and disassembly schedules of used or end-of-life products while satisfying the demand of their parts or components over a certain planning horizon. This paper considers products with assembly structure for the objective of minimizing the sum of purchase, set up, inventory holding, and disassembly operation costs, and suggests a two-stage heuristic, in which an init

There is a growing interest in the wireless sensor network technology in the home automation field, but as the number of sensor nodes in the home increases and as the data traffic generated by such nodes grows, the network becomes more congested. Due to resource constraints, a congestion control scheme for wireless sensor network should be designed with simplicity and operate energy efficiently. In this paper, we propose ADCC(Adaptive Duty-cycle Based Congestion Control), a lightweight congestio

Selective disassembly sequencing is the problem of determining the sequence of disassembly operations to extract one or more target components of a product. This study considers the problem with random operation times in the parallel disassembly environment in which one or more components can be removed at the same time by a single disassembly operation. After representing all possible disassembly sequences using the extended process graph, a stochastic integer programming model is developed for

This study considers a scheduling problem for remanufacturing systems in which end-of-life products are separated into their major components at a disassembly workstation, each of them is reprocessed at its dedicated flow-shop-type reprocessing line with serial workstations, and finally, the reprocessed components, together with new components if required, are reassembled into remanufactured products at a reassembly workstation. Among various system configurations, we focus on the one with paral

This study considers selective disassembly sequencing under the sequential disassembly environment in which one component is obtained at each disassembly operation. The problem is to determine the sequence of disassembly operations to obtain multiple target components of a used or end-of-life product for the purpose of repair, reuse, remanufacturing, disposal, etc. In particular, we consider sequence-dependent setups in which setup costs depend on the disassembly operation just completed and on