김도원 교수

The CALICE collaboration is studying the design of high performance electromagnetic and hadronic calorimeters for future International Linear Collider detectors. For the electromagnetic calorimeter, the current baseline choice is a high granularity sampling calorimeter with tungsten as absorber and silicon detectors as sensitive material. A ``physics prototype'' has been constructed, consisting of thirty sensitive layers. Each layer has an active area of 18x18 cm2 and a pad size of 1x1 cm2. The

We have experimentally demonstrated effects of BSPDN on performance-power of standard cell featuring Gate-all-around (GAA) FETs scaled down for SoC technology beyond 2nm node for the first time. 1<sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">st</sup> generation (Gen) BSPDN provides high immunity of cell-level leakage with ultra-scaled cell height and we achieve 6% speed gain by optimizing metal routing. As a result, 1<sup xmlns:mml="http://www.w3.

BACKGROUND: To develop a fully automated in-house gamma analysis software for the "Cheese" phantom-based delivery quality assurance (QA) of helical tomotherapy plans. METHODS: The developed in-house software was designed to automate several procedures, which need to be manually performed using commercial software packages. The region of interest for the analysis was automatically selected by cropping out film edges and thresholding dose values (>10% of the maximum dose). The film-measured dose w

Epidural MgSO(4) produced an antinociceptive effect characterised by an increase in the mechanical thresholds of similar magnitude to that produced by epidural morphine, compared with the control group, without causing any motor deficits. No potentiation of morphine antinociception was observed. The onset and offset times of antinociception could not be clearly established. To what extent these results can be extrapolated to clinical cases requires further investigation.

The roles of substrate termination in the growth behaviors of SrTiO3 (STO) films were investigated. With heat treatment and an atomic layer deposition technique, LaAlO3 (LAO) substrates with two kinds of terminations, i.e., LaO- and AlO2-terminated ones, could be prepared. On top of them, STO films were grown by using laser molecular beam epitaxy. In the case of the STO/LaO-LAO film, a transition from layer-by-layer growth to island growth was observed after growth of about 10 monolayers (ML). O