김덕영 교수

Collaboration with suppliers is essential for developing and producing a competitive product and it begins with selecting the right suppliers. This article addresses the supplier selection problem from the perspective of product configuration. We discuss first how the conventional decision models of supplier selection should be extended, considering the fact that supplier configuration requires supplier selection for each subsystem of a product. We then highlight the need to consider interrelati

This paper introduces an easy-to-use decision support system for COllabOrative DEsign named CO2DE. We examine the system particularly for the design concept filtering and selection stages considering the importance of conceptual design although the proposed framework can facilitate a design task, which is recurrent in many design phases. First, the paper briefly reviews what methods can be applicable to each step of the conceptual design process, and then describes the prerequisites for mathemat

Thermoelectric device is a promising next-generation energy solution owing to its capability to transform waste heat into useful electric energy, which can be realized in materials with high electric conductivities and low thermal conductivities. A recently synthesized silicon allotrope of Si₂₄ features highly anisotropic crystal structure with nanometer-sized regular pores. Here, based on first-principles study without any empirical parameter we show that the slightly doped Si<sub>24

The constantly increasing number of cars in the megacities is causing severe parking problems. To resolve this problem, many cities adopt parking guidance system as a part of intelligent transportation system (ITS). However, the current parking guidance system stays in its infant stage since the obtainable information is limited. To enhance parking management in the megacity and to provide better parking guidance to drivers, this study introduces an intelligent parking guidance system and propos

Many fault detection methods have been proposed for monitoring the health of various industrial systems. Characterizing the monitored signals is a prerequisite for selecting an appropriate detection method. However, fault detection methods tend to be decided with user's subjective knowledge or their familiarity with the method, rather than following a predefined selection rule. This study investigates the performance sensitivity of two detection methods, with respect to status signal characteris

A production capacity analysis considering market demand and raw materials is very important to design a new plant. However, in the food processing industry, the supply uncertainty of raw materials is very high, depending on the production site and the harvest season, and further, it is not straightforward to analyze too complex food production systems by using an analytical optimization model. For these reasons, this study presents a simulation-based decision support model to select the right l

Controlling part-to-part gaps is a crucial task in the laser welding of galvanized steel sheets for ensuring the quality of the assembly joint. However, part-to-part gaps are frequently non-uniform. Hence, elevations and depressions from the perspective of the heading direction of the laser beam always exist throughout the gap, creating ascending, descending, and flat travelling paths for laser welding. In this study, assuming non-uniform part-to-part gaps, the effects of welding direction on th

Car body parts are sometimes responsible for irritating noise caused by assembly defects. Typically, various types of noise are known to originate from within the interior trim panels of car doors. This noise is considered to be an important factor that degrades the emotional satisfaction of the driver of the car. This research suggests an in-process inspection system consisting of an inspection workstation and a noise detection method. The inspection workstation presses down the car door trim p