Skip to main content

이상민 교수

Fabian Rotermund

KAIST 물리학과 · 의학

연구실 소개

이상민 교수의 연구실은 나노소재 합성 및 응용 분야에서 두드러진 연구를 이어가고 있습니다. 주요 연구 방향은 반도체 나노결정의 형태 제어를 통한 기능성 나노소재 설계, 특히 PbS 나노결정의 다양하고 정밀한 형상 제조 기술 개발에 초점이 맞춰져 있습니다. 또한, 약물 전달 시스템의 안정성과 기능성을 향상시키기 위해 고분자 코팅된 리포좀 및 다중 약물 코팅 나노박스 기반의 스마트 약물 전달 시스템 개발도 진행 중입니다. 최근에는 생체 적합성과 3D 프린팅 성능을 동시에 확보한 탈세포화 세포외기질 기반 생체 인크를 통해 조직 공학 분야의 응용 가능성도 모색하고 있습니다.

나노소재 합성약물 전달 시스템스마트 고분자3D 생체 인크생체 적합성 재료

연구 현황

논문 수
400
총 인용 수
22,127
최근 5년 논문
66
주요 분야
의학

연구 성과 추이

표시된 성과는 수집된 데이터 기준으로 산출되며, 일부 차이가 있을 수 있습니다.

5개년 연도별 논문 게재 수
66총합
2021
2022
2023
2024
2025
5개년 연도별 피인용 수
2,428총합
20212022202320242025

주요 논문

15
1
논문|인용수 524·2002
Single-Crystalline Star-Shaped Nanocrystals and Their Evolution: Programming the Geometry of Nano-Building Blocks
Sang‐Min Lee, Young‐wook Jun, Sung-Nam Cho, Jinwoo Cheon
SJR Q1Journal of the American Chemical Society

We demonstrate a novel synthetic scheme that can be used to differentially guide the shape of PbS semiconductor nanocrystals. Our study first demonstrates the discovery of single-crystalline star-shaped nanocrystals as novel transient species. We then carefully probe their shape evolution toward other novel nanostructures (e.g., tadpole-, L-, T-, cross-shapes, highly faceted star shapes, truncated octahedrons and cubes, etc.) and systematically elucidate the key parameters that control these fin

Materials ChemistryMaterials Science
2
논문|인용수 307·2004
Novel silk/poly(butylene succinate) biocomposites: the effect of short fibre content on their mechanical and thermal properties
Sang‐Min Lee, Donghwan Cho, Won Ho Park, Sang Do Lee, Shuaiyuan Han, L. T. Drzal
SJR Q1Composites Science and Technology
Polymers and PlasticsMaterials Science
3
논문|인용수 272·2021
Analysis of Activation Process of Carbon Black Based on Structural Parameters Obtained by XRD Analysis
Sang‐Min Lee, Sang-Hye Lee, Jae‐Seung Roh
SJR Q2CrystalsOA

In the present study, carbon black activated by CO2 gas was examined through XRD analysis, especially with regard to changes in its structural parameters. Based on the results, its activation process was thoroughly analyzed. The activation process was controlled by isothermally activating the carbon black inside a reaction tube through which CO2 gas flowed. With this approach, the degree of activation was varied as desired. At an early stage of the activation process, the amorphous fraction on t

Mechanical EngineeringEngineering
4
논문|인용수 247·2007
Polymer-Caged Lipsomes: A pH-Responsive Delivery System with High Stability
Sang‐Min Lee, Haimei Chen, Christine M. Dettmer, Thomas V. O’Halloran, SonBinh T. Nguyen
SJR Q1Journal of the American Chemical Society

Polymer-incorporated liposomes were prepared from preformed liposomes and a cholesterol-functionalized poly(acrylic acid) additive via a simple drop-in procedure. These modified liposomes possess surface-active carboxylate groups that can be cross-linked with telechelic 2,2‘-(ethylenedioxy)bis(ethylamine) linkers, resulting in polymer-caged liposomes (PCLs) that are highly stable and have tunable pH-sensitive responses.

Molecular BiologyBiochemistry, Genetics and Molecular Biology
5
논문|인용수 213·2010
Polymer-Caged Nanobins for Synergistic Cisplatin−Doxorubicin Combination Chemotherapy
Sang‐Min Lee, Thomas V. O’Halloran, SonBinh T. Nguyen
SJR Q1Journal of the American Chemical Society

Multicomponent chemotherapy has increasingly become a strategy of great importance in clinical cancer treatments. However, this type of chemotherapy has not been demonstrated in nanoscale delivery vehicles where two cytotoxic agents can be packaged together, potentially leading to synergistic drug activities. Herein, we present the codelivery of doxorubicin and cisplatin via a single polymer-caged nanobin (PCN) and show that copackaging can yield strong synergy in the efficacy of these agents. S

BiomaterialsMaterials Science
6
논문|인용수 163·2019
Decellularized extracellular matrix-based bio-ink with enhanced 3D printability and mechanical properties
Min Kyeong Kim, Wonwoo Jeong, Sang‐Min Lee, Jeong Beom Kim, Songwan Jin, Hyun‐Wook Kang
SJR Q1BiofabricationOA

Recently, decellularized extracellular matrix-based bio-ink (dECM bio-ink) derived from animal organs is attracting attention because of its excellent biocompatibility. However, its poor 3D printability and weak mechanical properties remain a challenge. Here, we developed a new dECM bio-ink with enhanced 3D printability and mechanical properties. dECM micro-particles of about 13.4 μm in size were prepared by decellularizing a porcine liver followed by freeze-milling. The new bio-ink, named as dE

Biomedical EngineeringEngineering
7
논문|인용수 155·2008
Comparison of volatile components in fermented soybean pastes using simultaneous distillation and extraction (SDE) with sensory characterisation
Sang‐Min Lee, Byeong‐il Ahn
SJR Q1Food Chemistry
Food ScienceAgricultural and Biological Sciences
8
논문|인용수 150·2004
Hydrogen from natural gas: part I—autothermal reforming in an integrated fuel processor
Sang‐Min Lee, Daniel Applegate, Shabbir Ahmed, Susan Hurst Calderone, T.G. Harvey
SJR Q1International Journal of Hydrogen Energy
CatalysisChemical Engineering
9
논문|인용수 148·2017
Extracellular matrix remodeling in vivo for enhancing tumor-targeting efficiency of nanoparticle drug carriers using the pulsed high intensity focused ultrasound
Sang‐Min Lee, Hyounkoo Han, Heebeom Koo, Jin Hee Na, Hong Yeol Yoon, Kyung Eun Lee, Hyukjin Lee, Hyuncheol Kim, Ick Chan Kwon, Kwangmeyung Kim
SJR Q1Journal of Controlled Release
BiomaterialsMaterials Science
10
논문|인용수 135·1994
Effect of the second phase on the initiation of hydrogenation of TiFe1−xMx (M = Cr,Mn) alloys☆
Sangmin Lee, T PERNG
SJR Q1International Journal of Hydrogen Energy
Materials ChemistryMaterials Science
11
논문|인용수 128·2013
Smart Nanoscale Drug Delivery Platforms from Stimuli-Responsive Polymers and Liposomes
Sang‐Min Lee, SonBinh T. Nguyen
SJR Q1MacromoleculesOA

Since the 1960s, stimuli-responsive polymers have been utilized as functional soft materials for biological applications such as the triggered-release delivery of biologically active cargos. Over the same period, liposomes have been explored as an alternative drug delivery system with potentials to decrease the toxic side effects often associated with conventional small-molecule drugs. However, the lack of drug-release triggers and the instability of bare liposomes often limit their practical ap

BiomaterialsMaterials Science
12
논문|인용수 110·2016
Effects of Dietary Inclusion of Astaxanthin on Growth, Muscle Pigmentation and Antioxidant Capacity of Juvenile Rainbow Trout (Oncorhynchus mykiss)
Md Mostafizur Rahman, Sanaz Khosravi, Kyung Hoon Chang, Sang‐Min Lee
SJR Q2Preventive Nutrition and Food ScienceOA

This study was designed to investigate the effects of dietary astaxanthin levels on growth performance, feed utilization, muscle pigmentation, and antioxidant capacity in juvenile rainbow trout. Four experimental diets were formulated to contain 0, 50, 75, and 100 mg/kg astaxanthin (designed as AX0, AX50, AX75, and AX100). Each diet was fed to triplicate groups of fish (18.5 g/fish) for 10 weeks. Growth performance and muscle composition of fish were not affected by dietary astaxanthin levels. T

BiochemistryMedicine
13
논문|인용수 107·2015
Bulk graphite: materials and manufacturing process
Sangmin Lee, Dong-Su Kang, Jea-Seung Roh
SJR Q1Carbon letters

Graphite can be classified into natural graphite from mines and artificial graphite. Due to its outstanding properties such as light weight, thermal resistance, electrical conductivity, thermal conductivity, chemical stability, and high-temperature strength, artificial graphite is used across various industries in powder form and bulk form. Artificial graphite of powder form is usually used as anode materials for secondary cells, while artificial graphite of bulk form is used in steelmaking elec

Materials ChemistryMaterials Science
14
논문|인용수 92·2009
“Clickable” Polymer-Caged Nanobins as a Modular Drug Delivery Platform
Sang‐Min Lee, Haimei Chen, Thomas V. O’Halloran, SonBinh T. Nguyen
SJR Q1Journal of the American Chemical Society

Modularly clickable polymer-caged nanobins (PCNs) were prepared from liposome templates using a drop-in cholesterol-modified poly(acrylic acid) reagent followed by cross-linking with alkyne-functionalized diamine linker that allows for the conjugation of azide-modified targeting ligands via click ligation. These PCNs possess pH-responsive characteristics that can be used to trigger the release of encapsulated doxorubicin (DXR) payload inside the liposomal core under mild acidic conditions. After

BiomaterialsMaterials Science
15
논문|인용수 91·2002
Effects of diesel fuel characteristics on spray and combustion in a diesel engine
Sang‐Min Lee, Daisuke Tanaka, J Kusaka, Yasuhiro Daisho
JSAE Review
Fluid Flow and Transfer ProcessesChemical Engineering

대표 연구 분야

Pulmonary and Respiratory MedicineMaterials ChemistryBiomedical EngineeringElectrical and Electronic EngineeringEpidemiologyMolecular Biology

이상민 교수의 연구를 Nubint에서 더 깊이 살펴보세요

이 연구실의 논문을 앱에서 열어 AI와 함께 읽고, 핵심을 요약하고, 내 글에 인용하세요.