김한수 교수

Li-air(O2) and Li-S batteries have gained much attention recently and most relevant research has aimed to improve the electrochemical performance of air(O2) or sulfur cathode materials. However, many technical problems associated with the Li metal anode have yet to be overcome. This review mainly focuses on the electrochemical behaviors and technical issues related to metallic Li anode materials as well as other metallic anode materials such as alkali (Na) and alkaline earth (Mg) metals, includi

Silicon is a promising candidate for electrodes in lithium ion batteries due to its large theoretical energy density. Poor capacity retention, caused by pulverization of Si during cycling, frustrates its practical application. We have developed a nanostructured form of silicon, consisting of arrays of sealed, tubular geometries that is capable of accommodating large volume changes associated with lithiation in battery applications. Such electrodes exhibit high initial Coulombic efficiencies (i.e

TiO2 nanofibers, TiO2 hollow nanofibers, and nitridated TiO2 hollow nanofibers were synthesized using a simple electrospinning method and subsequent nitridation treatment. The nitridated TiO2 hollow nanofibers showed twice higher rate capability compared to that of pristine TiO2 nanofibers at 5 C. This improvement is mainly attributed to shorter lithium ion diffusion length and high electronic conductivity along the surface of nitridated hollow nanofibers.

Problems related to tremendous volume changes associated with cycling and the low electron conductivity and ion diffusivity of Si represent major obstacles to its use in high-capacity anodes for lithium ion batteries. We have developed a group IVA based nanotube heterostructure array, consisting of a high-capacity Si inner layer and a highly conductive Ge outer layer, to yield both favorable mechanics and kinetics in battery applications. This type of Si/Ge double-layered nanotube array electrod

The reaction mechanism of lithium insertion into was studied using various analytic techniques including electrochemical measurements, X‐ray diffraction (XRD), and Auger electron spectroscopy (AES). Electrochemical tests demonstrated that 1 mol reacted with 3.9 mol Li from which the initial capacity obtained was approximately 1370 mAh/g. Ex situ XRD and AES data showed that lithium intercalated into the lattice first followed by alloying with Si and Mg. The degradation mechanism of during cyclin

In order to develop high capacity electrode materials with next generation Li-ion batteries, intensive research effort has been actively devoted to satisfy the power demands for electronic devices, electric vehicles and energy storage units for renewable energy. This review focuses on high capacity Si based nanostructured anode materials composed of Si and various inactive phase materials. This review is devoted mainly to their electrochemical performances and technical issues when they were emp

Abstract To overcome the lithium storage barriers of current lithium‐ion batteries, it is imperative that conventional low capacity graphite anodes be replaced with other higher capacity anode materials. Silicon is a promising alternative anode material due to its huge energy densities; however, its lithium‐concentration‐dependent volumetric changes can induce severely adverse effects that lead to drastic degradations in capacity during cycling. The dealloying of Si–metal alloys is recently sugg

Lithium-sulfur batteries could become an excellent alternative to replace the currently used lithium-ion batteries due to their higher energy density and lower production cost; however, commercialization of lithium-sulfur batteries has so far been limited due to the cyclability problems associated with both the sulfur cathode and the lithium-metal anode. Herein, we demonstrate a highly reliable lithium-sulfur battery showing cycle performance comparable to that of lithium-ion batteries; our desi

Developing electrode materials with high-energy densities is important for the development of lithium-ion batteries. Here, we demonstrate a mesoporous molybdenum dioxide material with abnormal lithium-storage sites, which exhibits a discharge capacity of 1,814 mAh g(-1) for the first cycle, more than twice its theoretical value, and maintains its initial capacity after 50 cycles. Contrary to previous reports, we find that a mechanism for the high and reversible lithium-storage capacity of the me

SiOx-based materials attracted a great deal of attention as high-capacity Li(+) storage materials for lithium-ion batteries due to their high reversible capacity and good cycle performance. However, these materials still suffer from low initial Coulombic efficiency as well as high production cost, which are associated with the complicated synthesis process. Here, we propose a dual-size Si nanocrystal-embedded SiOx nanocomposite as a high-capacity Li(+) storage material prepared via cost-effectiv

Si/SiOx composite materials have been explored for their commercial possibility as high-performance anode materials for lithium ion batteries, but suffer from the complexity of and limited synthetic routes for their preparation. In this study, Si/SiOx nanospheres were developed using a nontoxic and precious-metal-free preparation method based on hydrogen silsesquioxane obtained from sol-gel reaction of triethoxysilane. The resulting Si/SiOx nanospheres with a uniform carbon coating layer show ex

Silicon oxides (SiOx) have attracted recent attention for their great potential as promising anode materials for lithium ion batteries as a result of their high energy density and excellent cycle performance. Despite these advantages, the commercial use of these materials is still impeded by low initial Coulombic efficiency and high production cost associated with a complicated synthesis process. Here, we demonstrate that Si/SiOx nanosphere anode materials show much improved performance enabled