정혜주 교수

Radio-frequency magnetron sputtering was used to deposit SrBi2Ta2O9 ferroelectric thin films on Pt(111)/Ti/SiO2/Si(001) substrates. Thin films were deposited at room temperature with argon pressures of 0.5–100 mTorr and with sputtering power of 2.5 W/cm2. The crystal orientations of thin films were strongly affected by the argon pressures, the c-axis oriented SrBi2Ta2O9 thin film was obtained with argon pressure of 30 mTorr. The crystal structures of the c-axis oriented SrBi2Ta2O9 thin film were

A combination treatment with topical tacrolimus and an excimer laser may be useful as an induction therapy for up to 6 months, but continuation of this therapy for > 6 months might not provide a better final outcome than monotherapy.

A Kaufman-type 5 cm convex gridded ion-beam source is characterized in terms of angle-resolved ion-beam current density and beam uniformity at various discharge currents, electromagnet currents, and acceleration potentials.

Chronic neutrophilic leukemia(CNL) is a very rare myeloproliferative disease, characterized by sustained mature neutrophilic leukocytosis with granulocytic bone marrow infiltration, high NAP(neutrophilic alkaline phosphatase) score and absence of philadelphia chromosome, It is frequently accompanied by hepatosplenomegaly, elevated serum vitamin B_12 and uric acid level. For the diagnosis of CNL, the leukemoid reaction, especially secondary to neoplasia, infection and autoimmune diseases, should

Partially ionized beam deposition of Cu thin films onto glass at room temperature was carried out to fabricate laser mirrors with good structural and reflective properties. At a constant film thickness of 600 Å, the grain size of as-grown Cu films increased with acceleration voltage. There was no indication of defects such as cracks and/or large pores in the film surface as shown in scanning electron microscopy images. Rms surface roughnesses of 600 Å thick films were measured by atomic force mi

An entry from the Cambridge Structural Database, the world’s repository for small molecule crystal structures. The entry contains experimental data from a crystal diffraction study. The deposited dataset for this entry is freely available from the CCDC and typically includes 3D coordinates, cell parameters, space group, experimental conditions and quality measures.

International audience

Development of metal ion source growth of high quality Cu metal film formation of non-stoichiometric films of Si(100), and modification fo polymer surface by low enregy ion beam have been carried out at KIST Ion Beam Lab. A new metal ion source with high ion beam flux has been developed by a hybrid ion beam (HIB) deposition and non-stoichiometric films are controlled by supplying energy. The ion assisted reaction (IAR) in which keV ion beam is irradiated in reactive gas environment has been deve