이현종 교수

CLF had no disadvantages in terms of the biomechanical features compared with conventional CR implant prosthesis and could be successfully applied for implant prosthesis.

Abstract Few studies have examined the biomechanical effects of dental implant placement in the implant-supported mandibular advancement device (MAD) for the treatment of obstructive sleep apnea in completely edentulous patients. This biomechanical study aimed to evaluate the stability of the implant-supported MAD for different numbers and positions of dental implants. A 3D edentulous maxillofacial model with the one-piece MAD was considered for various numbers and positions of implants. On each

INTRODUCTION: Digital feedback for tooth preparation can provide dental practitioners with more objective and accurate evaluations compared to conventional methods. This study aimed to evaluate the educational effect and satisfaction of digital feedback compared with those of the conventional putty index method for tooth preparation. MATERIAL AND METHODS: Forty-eight third-grade dental students were selected. All students performed a full-coverage preparation on a right mandibular first molar re

AIMS: To evaluate screw loosening and fracture load and angular deviation of a single implant-supported prosthesis under multi-directional loading condition at three different occlusal contact points. METHODS: A total of 40 metal crowns were cemented to external connection implants and were embedded vertically and obliquely. The occlusal surface of the crown was designed with three flat surfaces, contact a, b, and c, representing outer and inner 20-degree inclination for buccal and lingual cusps

Objectives: This study was designed to compare the surface morphologies and volumes of posterior prefabricated zirconia crowns and posterior stainless steel crowns (SSCs) using digitalized three-dimensional (3D) reconstructed images. Study design: We tested prefabricated zirconia crowns (NuSmile ZR; Orthodontic Technologies, Houston, TX, USA) and SSCs (Kids Crown; Shinhung, Seoul, Korea) used to restore left maxillary and mandibular molars. A Rainbow scanner (Dentium, Seoul, Korea) was used to d

This study aimed to evaluate the feasibility of a 3-dimensional (3D) planned surgical guide technique designed for impacted supernumerary teeth (STs) extraction using 3D printed simulation models. In total, 17 participants from two university hospitals were recruited. Each participant performed surgery with both the conventional and surgical guide techniques. The following parameters were evaluated: (1) The time required for ST extraction, (2) the area of the window opening, and (3) the volume o