이장식 교수

Active research has been done on hybrid organic-inorganic perovskite materials for application to solar cells with high power conversion efficiency. However, this material often shows hysteresis, which is undesirable, shift in the current-voltage curve. The hysteresis may come from formation of defects and their movement in perovskite materials. Here, we utilize the defects in perovskite materials to be used in memory operations. We demonstrate flexible nonvolatile memory devices based on hybrid

Neuromorphic computing is a promising alternative to conventional computing systems as it could enable parallel computation and adaptive learning process. However, the development of energy efficient neuromorphic hardware systems has been hindered by the limited performance of analog synaptic devices. Here, we demonstrate the analog conductance modulation behavior in the ferroelectric thin-film transistors (FeTFT) that have the nanoscale ferroelectric material and oxide semiconductors. Accurate

The flexible nonvolatile organic memory devices were developed on the plastic substrates based on the organic thin-film transistors embedding self-assembled gold nanoparticles (Au(NP)). The organic memory devices exhibited good programmable memory characteristics with respect to the program/erase operations, resulting in controllable and reliable threshold voltage shifts. Additionally, the endurance, data retention, and bending cyclic measurements confirmed that the flexible memory devices exhib

Emulation of biological synapses that perform memory and learning functions is an essential step toward realization of bioinspired neuromorphic systems. Artificial synaptic devices have been developed based mostly on inorganic materials and conventional semiconductor device fabrication processes. Here, we propose flexible biomemristor devices based on lignin by a simple solution process. Lignin is one of the most abundant organic polymers on Earth and is biocompatible, biodegradable, as well as

A flexible and transparent resistive switching memory based on a natural organic polymer for future flexible electronics is reported. The device has a coplanar structure of Mg/Ag‐doped chitosan/Mg on plastic substrate, which shows promising nonvolatile memory characteristics for flexible memory applications. It can be easily fabricated using solution processes on flexible substrates at room temperature and indicates reliable memory operations. The elucidated origin of the bipolar resistive switc

The development of electronic devices possessing the functionality of biological synapses is a crucial step toward replicating the capabilities of the human brain. Of the various materials that have been used to realize artificial synapses, renewable natural materials have the advantages of being abundant, inexpensive, biodegradable, and ecologically benign. In this study, we report a biocompatible artificial synapse based on a matrix of the biopolymer ι-carrageenan (ι-car), which exploits Ag dy

Ferroelectric memory has been substantially researched for several decades as its potential to obtain higher speed, lower power consumption, and longer endurance compared to conventional flash memory. Despite great deal of effort to develop ferroelectric memory based on perovskite oxides on Si, formation of unwanted interfacial layer substantially compromises the performance of the ferroelectric memory. Furthermore, three-dimensional (3D) integration has been unimaginable because of high process

Ferroelectric materials have been intensively investigated for high-performance nonvolatile memory devices in the past decades, owing to their nonvolatile polarization characteristics. Ferroelectric memory devices are expected to exhibit lower power consumption and higher speed than conventional memory devices. However, non-complementary metal-oxide-semiconductor (CMOS) compatibility and degradation due to fatigue of traditional perovskite-based ferroelectric materials have hindered the developm

Abstract A number of synapse devices have been intensively studied for the neuromorphic system which is the next‐generation energy‐efficient computing method. Among these various types of synapse devices, photonic synapse devices recently attracted significant attention. In particular, the photonic synapse devices using persistent photoconductivity (PPC) phenomena in oxide semiconductors are receiving much attention due to the similarity between relaxation characteristics of PPC phenomena and Ca

A solution-processed, chitosan-based resistive-switching memory device is demonstrated with Pt/Ag-doped chitosan/Ag structure. The memory device shows reproducible and reliable bipolar resistive switching characteristics. A memory device based on natural organic material is a promising device toward the next generation of nonvolatile nanoelectronics. The memory device based on chitosan as a natural solid polymer electrolyte can be switched reproducibly between high and low resistance states. In

Organolead halide perovskites exhibit excellent optoelectronic and photovoltaic properties such as a wide range of light absorption and tunable band gaps. However, the presence of toxic elements and chemical instability under an ambient atmosphere hindered lead halide perovskites from real device applications because of environmental issues and stability. Here, we demonstrate a resistive switching memory device based on a lead-free bismuth halide perovskite (CH3NH3)3Bi2I9 (MABI). The active laye

Abstract Neuromorphic and cognitive computing with a capability of analyzing complicated information is explored as a new paradigm of intelligent systems. An implementation of a renewable material as an essential building block of an artificial synaptic device is suggested and a flexible and transparent synaptic device based on collagen extracted from fish skin is demonstrated. This device exhibits essential synaptic behaviors including analog memory characteristics, excitatory postsynaptic curr

The demand for high memory density has increased due to increasing needs of information storage, such as big data processing and the Internet of Things. Organic–inorganic perovskite materials that show nonvolatile resistive switching memory properties have potential applications as the resistive switching layer for next‐generation memory devices, but, for practical applications, these materials should be utilized in high‐density data‐storage devices. Here, nanoscale memory devices are fabricated

Implementation of biocompatible materials in resistive switching memory (ReRAM) devices provides opportunities to use them in biomedical applications. We demonstrate a robust, nonvolatile, flexible, and transparent ReRAM based on potato starch. We also introduce a biomolecular memory device that has a starch-chitosan composite layer. The ReRAM behavior can be controlled by mixing starch with chitosan in the resistive switching layer. Whereas starch-based biomemory devices which show abrupt chang