조정호 교수

A high-performance novel photodetector is demonstrated, which consists of graphene and CH3 NH3 PbI3 perovskite layers. The resulting hybrid photodetector exhibits a dramatically enhanced photo responsivity (180 A/W) and effective quantum efficiency (5× 10(4) %) over a broad bandwidth within the UV and visible ranges.

A transparent and stretchable all-graphene multifunctional electronic-skin sensor matrix is developed. Three different functional sensors are included in this matrix: humidity, thermal, and pressure sensors. These are judiciously integrated into a layer-by-layer geometry through a simple lamination process.

High-quality and millimeter-sized perovskite single crystals of CsPbBr 3 and Cs 4 PbBr 6 were prepared in organic solvents and studied for correlation between photocurrent generation and photoluminescence (PL) emission. The CsPbBr 3 crystals, which have a 3D perovskite structure, showed a highly sensitive photoresponse and poor PL signal. In contrast, Cs 4 PbBr 6 crystals, which have a 0D perovskite structure, exhibited more than 1 order of magnitude higher PL intensity than CsPbBr 3, which gene

Various fields of study consider MXene a revolutionary 2D material. Particularly in the field of sensors, the metal-like high electrical conductivity and large surface area of MXenes are desirable characteristics as an alternative sensor material that can transcend the boundaries of existing sensor technology. This critical review provides a comprehensive overview of recent advances in MXene-based sensor technology and a roadmap for commercializing MXene-based sensors. The existing sensors are s

Abstract The preparation of ferroelectric polymer–metallic nanowire composite nanofiber triboelectric layers is described for use in high‐performance triboelectric nanogenerators (TENGs). The electrospun polyvinylidene fluoride (PVDF)–silver nanowire (AgNW) composite and nylon nanofibers are utilized in the TENGs as the top and bottom triboelectric layers, respectively. The electrospinning process facilitates uniaxial stretching of the polymer chains, which enhances the formation of the highly o

A high-performance low-voltage graphene field-effect transistor (FET) array was fabricated on a flexible polymer substrate using solution-processable, high-capacitance ion gel gate dielectrics. The high capacitance of the ion gel, which originated from the formation of an electric double layer under the application of a gate voltage, yielded a high on-current and low voltage operation below 3 V. The graphene FETs fabricated on the plastic substrates showed a hole and electron mobility of 203 +/-

Abstract Recently, research interest in brain‐inspired neuromorphic computing based on robust and intelligent artificial neural networks has surged owing to the ability of such technology to facilitate massive parallel, low‐power, highly adaptive, and event‐driven computing. Here, a photosynaptic device with a novel weight updating mechanism for high‐speed and low‐power optoelectronic spike processing is proposed, wherein a synaptic weight is controlled by a mixed spike consisting of voltage and

With the emergence of human interface technology, the development of new applications based on stretchable electronics such as conformal biosensors and rollable displays are required. However, the difficulty in developing semiconducting materials with high stretchability required for such applications has restricted the range of applications of stretchable electronics. Here, we present stretchable, printable, and transparent transistors composed of monolithically patterned graphene films. This m

A piezopotential-powered active matrix strain sensor array based on a piezopotential-gated graphene transistor (GT) is demonstrated using a piezoelectric polymer. The strain sensor based on the piezopotential-gated GT exhibits excellent performance, including ultrahigh sensitivity (gauge factor = 389) and good durability (>3000 bending and releasing cycles) with a minimum detectable strain at 0.008%.

MXenes, an emerging class of two-dimensional (2D) transition metal carbides and nitrides, have potential for application as high-performance, low-cost electrodes in organic field-effect transistors (OFETs) because of their water dispersibility, high conductivity, and work-function tunability. In this study, we successfully fabricated a large-scale, uniform Ti3C2Tx MXene electrode array on a flexible plastic substrate for application in high-performance OFETs. The work function of the Ti3C2Tx MXe

We fabricated dye-sensitized MoS2 photodetectors that utilized a single-layer MoS2 treated with rhodamine 6G (R6G) organic dye molecules (with an optical band gap of 2.38 eV or 521 nm). The proposed photodetector showed an enhanced performance with a broad spectral photoresponse and a high photoresponsivity compared with the properties of the pristine MoS2 photodetectors. The R6G dye molecules deposited onto the MoS2 layer increased the photocurrent by an order of magnitude due to charge transfe

Recently, three-terminal synaptic devices have attracted considerable attention owing to their nondestructive weight-update behavior, which is attributed to the completely separated terminals for reading and writing. However, the structural limitations of these devices, such as a low array density and complex line design, are predicted to result in low processing speeds and high energy consumption of the entire system. Here, we propose a vertical three-terminal synapse featuring a remote weight

Transfer characteristics of ZnO thin-film transistors (TFTs) based on ZnO doped with various alkali metals. A new doping method is demonstrated by employing alkali metals to achieve high-performance and solution-processed ZnO TFTs with a low processing temperature (∼300 °C), which is applicable to flexible plastic substrates.

A novel device architecture for preparing a transparent and low-voltage graphene pressure-sensor matrix on plastic and rubber substrates is demonstrated. The coplanar gate configuration of the graphene transistor enables a simplified procedure. The resulting devices exhibit excellent device performance, including a high transparency of ca. 80% in the visible range, a low operating voltage less than 2 V, a high pressure sensitivity of 0.12 kPa(-1) , and excellent mechanical durability over 2500 c