안진수 교수

Dentin hypersensitivity is sharp and unpleasant pains caused by exposed dentinal tubules when enamel outside of the tooth wears away. The occlusion of dentinal tubules via in situ remineralization of hydroxyapatite is the best method to alleviate the symptoms caused by dentin hypersensitivity. Commercially available dental desensitizers are generally effective only on a specific area and are relatively toxic, and their performance usually depends on the skill of the clinician. Here, a facile and

PURPOSE: This study was conducted to evaluate the effects of different phosphate monomer-containing primers on the shear bond strength between yttria-tetragonal zirconia polycrystal (Y-TZP) ceramics and MDP-containing self-adhesive resin cement. MATERIALS AND METHODS: Y-TZP ceramic surfaces were ground flat with #600-grit SiC paper and divided into six groups (n = 10). They were treated as follows: untreated (control), Metal/Zirconia Primer, Z-PRIME Plus, air abrasion, Metal/Zirconia Primer with

This study examines the development of lower temperature solid oxide fuel cells (SOFCs) and the incremental improvement in performance obtained from a wide range of techniques, from pressed anodes to tape-cast anodes, from gadolinia-doped ceria (GDC) single-layer electrolytes to erbium-stabilized bismuth oxide (ESB)/GDC bilayer, and from -GDC composite cathodes to optimized -ESB composites. GDC single-layer electrolyte-based SOFCs were prepared from four different fabrications and exhibit maximu

Abstract In this paper we present results for a high power density IT‐SOFC and a method for dispersing nanosized Ce 0.9 Gd 0.1 O 1.95 (GDC) particles at the GDC electrolyte and Ni‐GDC anode interface. Dispersed nanosized particles were deposited to form an anode functional layer (AFL). Anode supports were prepared by tape casting of large micron‐sized NiO powder and sub micron‐sized GDC powder without pore former. For the cathode a La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3 – δ (LSCF)‐GDC composite was use

The brands and shades of the composite resins were shown to have a clear effect on TP, but an inconsistent tendency for ΔE*(ab).

Abstract We present a novel method of controlling the specular and diffuse reflection of light by the electrostatic deposition of a spherical particle monolayer followed by electroless plating. Charged polystyrene colloidal particles, ranging in size from 100 nm to 5 μm, were adsorbed from solution onto oppositely charged polyelectrolyte multilayers (PEM). The monodisperse particle monolayers were coated with nickel in a two‐step electroless plating process using palladium catalysts. These surfa

In the construction of dental restorative polymer composite materials, surface priming on mineral fillers is essential to improve the mechanical performance of the composites. Here we present bioinspired catechol-functionalized primers for a tougher dental resin composite containing glass fillers. The catecholic primers with different polymerizable end groups were designed and then coated on glass surfaces using a simple drop-casting or dip-coating process. The surface binding ability and possib