김진영 교수

Tandem solar cells, in which two solar cells with different absorption characteristics are linked to use a wider range of the solar spectrum, were fabricated with each layer processed from solution with the use of bulk heterojunction materials comprising semiconducting polymers and fullerene derivatives. A transparent titanium oxide (TiO(x)) layer separates and connects the front cell and the back cell. The TiO(x) layer serves as an electron transport and collecting layer for the first cell and

Polymer photovoltaic cells with power conversion efficiencies approaching 5 % have been fabricated using titanium oxide (TiOx) as an optical spacer (see Figure). Solar cells with a TiOx layer (deposited via a sol–gel process) between the active layer and the electron-collecting aluminum electrode exhibit approximately a 50 % enhancement in short-circuit current compared to similar devices without the optical spacer, as a result of modification of the spatial distribution of the light intensity i

New semi-crystalline photovoltaic polymers were synthesized and the optimized device exhibited 9.39% efficiency in a ∼300 nm thick single-cell device.

Colloidal quantum dot (CQD) optoelectronics offers a compelling combination of low-cost, large-area solution processing, and spectral tunability through the quantum size effect. Since early reports of size-tunable light emission from solution-synthesized CQDs over 25 years ago, tremendous progress has been made in synthesis and assembly, optical and electrical properties, materials processing, and optoelectronic applications of these materials. Here some of the major developments in this field a

A self-organized hole extraction layer (SOHEL) with high work function (WF) is designed for energy level alignment with the ionization potential level of CH3 NH3 PbI3 . The SOHEL increases the built-in potential, photocurrent, and power conversion efficiency (PCE) of CH3 NH3 PbI3 perovskite solar cells. Thus, interface engineering of the positive electrode of solution-processed planar heterojunction solar cells using a high-WF SOHEL is a very effective way to achieve high device efficiency (PCE

Organic-inorganic hybrid perovskite materials offer the potential for realization of low-cost and flexible next-generation solar cells fabricated by low-temperature solution processing. Although efficiencies of perovskite solar cells have dramatically improved up to 19% within the past 5 years, there is still considerable room for further improvement in device efficiency and stability through development of novel materials and device architectures. Here we demonstrate that inverted-type perovski

Small-bandgap polymer solar cells (PSCs) with a thick bulk heterojunction film of 340 nm exhibit high power conversion efficiencies of 9.40% resulting from high short-circuit current density (JSC ) of 20.07 mA cm(-2) and fill factor of 0.70. This remarkable efficiency is attributed to maximized light absorption by the thick active layer and minimized recombination by the optimized lateral and vertical morphology through the processing additive.

We investigate mixed solvents of N,N-dimethylformamide (DMF) and γ-butyrolactone (GBL) to produce the smooth surface of a perovskite film and uniform crystal domains. This ideal morphology from mixed solvents enhances the power conversion efficiency to over 6% by improving the exciton dissociation efficiency and reducing the recombination loss at both interfaces of PEDOT:PSS/perovskite and perovskite/PCBM.

We demonstrate high-performance polymer solar cells using the plasmonic effect of multipositional silica-coated silver nanoparticles. The location of the nanoparticles is critical for increasing light absorption and scattering via enhanced electric field distribution. The device incorporating nanoparticles between the hole transport layer and the active layer achieves a power conversion efficiency of 8.92% with an external quantum efficiency of 81.5%. These device efficiencies are the highest va

Interface engineering by combination of TiOx and a conjugated polyelectrolyte as an electron transport layer modifies the electrical contact between a metal electrode and an organic active layer with well-aligned frontier orbital energy levels for efficient charge transport. This results in remarkable improvements in the device performance of inverted polymer solar cells and polymer light-emitting diodes. Detailed facts of importance to specialist readers are published as ”Supporting Information

Antimicrobial proteins (peptides) are known to play important roles in the innate host defense mechanisms of most living organisms, including plants, insects, amphibians and mammals. They are also known to possess potent antibiotic activity against bacteria, fungi, and even certain viruses. Recently, the rapid emergence of microbial pathogens that are resistant to currently available antibiotics has triggered considerable interest in the isolation and investigation of the mode of action of antim