노준석 교수

Sub-10 nm nanostructures have received broad interest for their intriguing nanooptical phenomena, such as extreme field localization and enhancement, quantum tunneling effect, and strong coupling. The range of cutting-edge applications based on single-digitnanometer scale structures has expanded with the development of nanofabrication technologies. However, challenges still remain in overcoming fabrication limits, such as scalability, controllability, and reproducibility for further practical ap

As an alternative approach to the conventional deposition and photolithographic processes, the laser digital patterning (LDP) process, which is also known as the laser direct writing process, has attracted considerable attention because it is a non-photolithographic, non-vacuum, on-demand, and cost-effective electrode fabrication route that can be applied to various substrates, including heat-sensitive flexible substrates. The LDP process was initially developed using noble metal nanoparticles (

We used a deep learning network to find the frequency of a noisy sinusoidal wave. A three-layer neural network was designed to extract the frequency of sinusoidal waves that had been combined with white noise at a signal-to-noise ratio of 25 dB. One hundred thousand waves were prepared for training and testing the model. We designed a neural network that could achieve a mean squared error of 4 × 10−5 for normalized frequencies. This model was written for the range 1 kHz ≤ f ≤ 10 kHz but also sho

Metasurfaces can modulate light with periodically arranged subwavelength scatterers, and they can generate arbitrary wavefronts. Therefore, they can be used to realize various optical components. In particular, metasurfaces can be used to realize lenses, so-called metalenses. In the last decade, metalenses have been actively studied and developed. In this review, we firstly introduce the fundamental principles of metalenses in terms of materials, phase modulation method, and design method. Based

Stacked split-ring resonators (SSRR) arrays exhibiting polarization-sensitive dichroic responses in both visible and near-infrared wavelengths are realized over a centimeter-scale large area. The SSRR arrays are derived from pagoda-like nanorods fabricated from the self-assembly of a lamellae-forming polystyrene-b-poly (methyl methacrylate) copolymer (PS-b-PMMA) confined in cylindrical pores of anodized aluminum oxide (AAO) template. Along the nanorod direction, PS and PMMA nanodomains were alte

Using reinforcement learning, a deep Q-network was used to design polarization-independent, perfect solar absorbers. The deep Q-network selected the geometrical properties and materials of a symmetric three-layer metamaterial made up of circular rods on top of two films. The combination of all the possible permutations gives around 500 billion possible designs. In around 30,000 steps, the deep Q-network was able to produce 1250 structures that have an integrated absorption of higher than 90% in

Artificially structured materials with unit cells at sub-wavelength scale, known as metamaterials, have been widely used to precisely control and manipulate waves thanks to their unconventional properties which cannot be found in nature. In fact, the field of acoustic metamaterials has been much developed over the past 15 years and still keeps developing. Here, we present a topical review of metamaterials in acoustic wave science. Particular attention is given to fundamental principles of acoust

Structural coloring is production of color by surfaces that have microstructure fine enough to interfere with visible light; this phenomenon provides a novel paradigm for color printing. Plasmonic color is an emergent property of the interaction between light and metallic surfaces. This phenomenon can surpass the diffraction limit and achieve near unlimited lifetime. We categorize plasmonic color filters according to their designs (hole, rod, metal–insulator–metal, grating), and also describe st

We theoretically investigate a metasurface perfect absorber based on indium-tin-oxide as active material. Our design scheme relies on conventional metal–oxide–semiconductor model and the Drude model. Inducing a voltage into the device causes a blue-shift of 50 nm in the reflectance spectrum in the infrared region. The total thickness of the device is only 3.5% of the working wavelength λ = 2.56 μm, and the rate of reflectance change reaches 5.16 at λ = 2.56 μm. Because the material that we use h

Resolution of the conventional lens is limited to half the wavelength of the light source by diffraction. In the conventional optical system, evanescent waves, which carry sub-diffraction spatial information, has exponentially decaying amplitude and therefore cannot reach to the image plane. New optical materials called metamaterials have provided new ways to overcome diffraction limit in imaging by controlling the evanescent waves. Such extraordinary electromagnetic properties can be achieved a