정인화 교수

Step-by-step controllable thermal reduction of individual graphene oxide sheets, incorporated into multiterminal field effect devices, was carried out at low temperatures (125-240 degrees C) with simultaneous electrical measurements. Symmetric hysteresis-free ambipolar (electron- and hole-type) gate dependences were observed as soon as the first measurable resistance was reached. The conductivity of each of the fabricated devices depended on the level of reduction (was increased more than 10(6)

A simple optical method is presented for identifying and measuring the effective optical properties of nanometer-thick, graphene-based materials, based on the use of substrates consisting of a thin dielectric layer on silicon. High contrast between the graphene-based materials and the substrate is obtained by choosing appropriate optical properties and thickness of the dielectric layer. The effective refractive index and optical absorption coefficient of graphene oxide, thermally reduced graphen

The electrical conductivity and gas-sensing characteristics of individual sheets of partially reduced graphene oxide are studied, and the results display a strong dependence on the chosen reduction method. Three reduction procedures are considered here: thermal, chemical, and a combined chemical/thermal approach. Samples treated by chemical/thermal reduction display the highest conductivity whereas thermally reduced samples display the fastest gas-sensing response times. The chemo-resistive resp

Imaging systems that exploit arrays of photodetectors in curvilinear layouts are attractive due to their ability to match the strongly nonplanar image surfaces (i.e., Petzval surfaces) that form with simple lenses, thereby creating new design options. Recent work has yielded significant progress in the realization of such "eyeball" cameras, including examples of fully functional silicon devices capable of collecting realistic images. Although these systems provide advantages compared to those wi

The thermal stability and reduction kinetics of graphene oxide were studied by measuring the electrical resistivity of single-layer graphene films at various stages of reduction in high vacuum and by performing temperature programmed desorption (TPD) measurements of multilayer films in ultrahigh vacuum. The graphene oxide was exfoliated from the graphite oxide source material by slow-stirring in aqueous solution, which produces single-layer platelets with an average lateral size of ∼10 μm. From

The dispersion functions for the refractive index and the extinction coefficient of single- and multiple-layer graphene oxide samples were measured by imaging spectroscopic ellipsometry in the wavelength range of 350−1000 nm and were compared to previously reported results measured by confocal microscopy. The dispersion functions for thin platelets were also compared to those obtained by standard spectroscopic ellipsometry on a deposit consisting of many overlapping graphene oxide layers. Change

We investigated the colors of graphene and graphene-oxide multilayers that were deposited on various dielectric layers. In particular, the effects of the material thickness, the types of dielectric layers, and the existence of a back silicon substrate were analyzed. The colors of graphene-oxide layers on a SiO2/Si substrate were found to periodically change as the material thickness increased. However, the colors of graphene layers on the same substrate became saturated without a similar periodi

We report on a type of digital camera that uses a hexagonal array of silicon photodetectors on a substrate whose surface has parabolic curvature. This elliptical paraboloid shape closely matches the image surface formed by a simple, planoconvex lens. The hexagonal arrangement provides high area coverage with an approximately circular peripheral view. Details of the design strategies and underlying features of the mechanics and optics are described. Full imaging with these parabolic cameras and c