김기강 교수

Hexagonal boron nitride (h-BN) is very attractive for many applications, particularly, as protective coating, dielectric layer/substrate, transparent membrane, or deep ultraviolet emitter. In this work, we carried out a detailed investigation of h-BN synthesis on Cu substrate using chemical vapor deposition (CVD) with two heating zones under low pressure (LP). Previous atmospheric pressure (AP) CVD syntheses were only able to obtain few layer h-BN without a good control on the number of layers.

Hexagonal boron nitride (h-BN) is a promising material as a dielectric layer or substrate for two-dimensional electronic devices. In this work, we report the synthesis of large-area h-BN film using atmospheric pressure chemical vapor deposition on a copper foil, followed by Cu etching and transfer to a target substrate. The growth rate of h-BN film at a constant temperature is strongly affected by the concentration of borazine as a precursor and the ambient gas condition such as the ratio of hyd

Although hexagonal boron nitride (h-BN) is a good candidate for gate-insulating materials by minimizing interaction from substrate, further applications to electronic devices with available two-dimensional semiconductors continue to be limited by flake size. While monolayer h-BN has been synthesized on Pt and Cu foil using chemical vapour deposition (CVD), multilayer h-BN is still absent. Here we use Fe foil and synthesize large-area multilayer h-BN film by CVD with a borazine precursor. These f

Although polycrystalline hexagonal boron nitride (PC-hBN) has been realized, defects and grain boundaries still cause charge scatterings and trap sites, impeding high-performance electronics. Here, we report a method of synthesizing wafer-scale single-crystalline hBN (SC-hBN) monolayer films by chemical vapor deposition. The limited solubility of boron (B) and nitrogen (N) atoms in liquid gold promotes high diffusion of adatoms on the surface of liquid at high temperature to provoke the circular

We report chemical doping (p-type) to reduce the sheet resistance of graphene films for the application of high-performance transparent conducting films. The graphene film synthesized by chemical vapor deposition was transferred to silicon oxide and quartz substrates using poly(methyl methacrylate). AuCl(3) in nitromethane was used to dope the graphene films and the sheet resistance was reduced by up to 77% depending on the doping concentration. The p-type doping behavior was confirmed by charac

We investigated the modulation of optical properties of single-walled carbon nanotubes (SWCNTs) by AuCl 3 doping. The van Hove singularity transitions (E 11 (S), E 22 (S), E 11 (M)) in absorption spectroscopy disappeared gradually with an increasing doping concentration and a new peak appeared at a high doping concentration. The work function was downshifted up to 0.42 eV by a strong charge transfer from the SWCNTs to AuCl 3 by a high level of p-doping. We propose that this large work function s

We report the synthesis of centimeter-scale, uniform 1T'- and 2H-MoTe2 thin films via the tellurization of Mo thin films. 1T'-MoTe2 was initially grown and converted gradually to 2H-MoTe2 over a prolonged growth time under a Te atmosphere. Maintaining excessive Te was essential for obtaining the stable stoichiometric 2H-MoTe2 phase. Further annealing under a lower partial pressure of Te at the same temperature, followed by a rapid quenching, led to the reverse phase transition from 2H-MoTe2 to 1

Hexagonal boron nitride (h-BN) has recently been in the spotlight due to its numerous applications including its being an ideal substrate for two-dimensional electronics, a tunneling material for vertical tunneling devices, and a growth template for heterostructures. However, to obtain a large area of h-BN film while maintaining uniform thickness is still challenging and has not been realized. Here, we report the systematical study of h-BN growth on Pt foil by using low pressure chemical vapor d

We report the synthesis of centimeter-scale monolayer WS2 on gold foil by chemical vapor deposition. The limited tungsten and sulfur solubility in gold foil allows monolayer WS2 film growth on gold surface. To ensure the coverage uniformity of monolayer WS2 film, the tungsten source-coated substrate was placed in parallel with Au foil under hydrogen sulfide atmosphere. The high growth temperature near 935 °C helps to increase a domain size up to 420 μm. Gold foil is reused for the repeatable gro

Two-dimensional (2D) materials such as graphene and hexagonal boron nitride (hBN) have attracted significant attention due to their remarkable properties. Numerous interesting graphene/hBN hybrid structures have been proposed but their implementation has been very limited. In this work, the synthesis of patched structures through consecutive chemical vapor deposition (CVD) on the same substrate was investigated. Both in-plane junctions and stacked layers were obtained. For stacked layers, depend

Among two dimensional (2D) van der Waals (vdW) layered materials such as graphene, which is used like a metal, and transition metal chalcogenides (TMdCs), which are used as semiconductors and metals, hexagonal boron nitride (hBN), which is used as an insulator, is ubiquitous as a building block to construct 2D vdW electronics for versatile tunneling devices. Monolayer and few-layer hBN films have been prepared with flake sizes of a few hundred micrometer via mechanical exfoliation and transfer m

Copper foil is the most common substrate to synthesize monolayer graphene by chemical vapor deposition (CVD). The surface morphology and conditions of the copper foil can be very different depending on the various suppliers or different batches. These surface properties of copper strongly affect the growth behavior of graphene, thus rendering the growth conditions irreproducible when different batches of Cu foil are used. Furthermore, the quality of the graphene is severely affected as well. In

We report the peculiar behavior of the ${G}^{\ensuremath{'}}$ band Raman intensity, which is dependent on the metallicity of single-wall carbon nanotubes (SWCNTs). In the metallic SWCNTs, the ${G}^{\ensuremath{'}}$ band intensity was enhanced relative to the $G$ band intensity, while the ${G}^{\ensuremath{'}}$ band intensity was suppressed in the semiconducting SWCNTs. Resonance Raman spectroscopy (using laser energies of ${E}_{\mathit{\text{laser}}}=2.41$, 1.96, 1.58, and $1.165\phantom{\rule{0

post-treatment. Atomic-scale modifications such as vacancy generation, substitutional doping, functionalization and repair of 2D TMDs and structural modifications including phase transitions and construction of heterostructures are discussed. Such modifications on the physical and chemical properties of 2D TMDs enable the development of various advanced applications including electronic and optoelectronic devices, sensing, catalysis, nanogenerators, and memory and neuromorphic devices. Finally,

The chemical doping of single-walled carbon nanotubes (SWCNTs) has been an important issue in tailoring the electronic structures of SWCNTs. This paper proposes a strategy for controlling the doping types and doping concentrations by choosing the reduction potential of a dopant relative to the redox potential of SWCNTs. For this purpose, the redox potential plot in terms of the chirality and diameter was generated based on theoretical calculations, which were in good agreement with the experimen