최경식 교수

OBJECTIVE: Facial nerve palsy is a common complication of treatment for vestibular schwannoma (VS), so preserving facial nerve function is important. The preoperative visualization of the course of facial nerve in relation to VS could help prevent injury to the nerve during the surgery. In this study, we evaluate the accuracy of diffusion tensor tractography (DTT) for preoperative identification of facial nerve. METHODS: We prospectively collected data from 11 patients with VS, who underwent pre

A wideband Internet of Things (IoT) transmitter (TX) employing open-loop binary frequency-shift keying (BFSK) modulator with a pseudo-randomized phase transition (PRPT) time and a single-supply Class-G harmonic rejection (HR) power amplifier (PA) is presented. The proposed open-loop phase switching modulator eliminates the data-rate limitation in a conventional phase-locked loop (PLL)-based closed-loop modulator, while the PRPT scheme increases the effective phase resolution with a better power

With growing interest in terahertz (THz) imaging, there has been an increasing demand for low-cost, low-power, and high-sensitivity THz receiver. Lately, heterodyne structures in CMOS technologies have been emerging as suitable solutions due to their advantages of low cost, high integration density, and high sensitivity. In order to take advantage of high sensitivity provided by heterodyne receivers, however, local-oscillator (LO) stabilization is essential, since the free-running oscillator wit

Phased-array systems are extensively utilized in wireless transmission and reception links operating at frequencies above 100 GHz to compensate for significant path loss. Regardless of beamforming architectures, the low-power implementation of a high-gain and low-noise receiver (RX) front-end (FE) plays a crucial role in large-scale RX arrays to maintain link margin. This article presents a 154 GHz low-power, high-gain, and low-noise CMOS RX FE adopting a proposed active mixer driven by a <inlin

A fully integrated 490-GHz heterodyne imager is reported. The imager adopts a second subharmonic resistive mixer wherein the transmission lines and small capacitors are used to enhance port-to-port isolation and the suppression of undesired local oscillator (LO) leakage and harmonic mixing components. The imager achieves a minimum noise equivalent power of 1.2 pW/Hz <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">0.5</sup> while dissipating 26 mW fr

This work presents a <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">D</i>-band multi-input multi-output (MIMO) transmitter (TX) array with a four-element joint static/dynamic beamformer. The proposed beamformer combines a static beamformer and a space-time modulated dynamic array to produce a large number of concurrent beams with fewer array elements and multiple independent data streams, essentially achieving RF-domain beam number multiplicatio

A 915-MHz binary frequency-shift keying (BFSK) transmitter is proposed in this letter. The proposed transmitter architecture allows relaxing the frequency-tuning requirement of the conventional Internet of Things transceiver by the frequency-tripling signal-path topology. The tuning-range requirement is significantly improved down to 4% with the proposed signaling scheme, and this results in the ultralow-power synthesizer implementation. The proposed frequency tripler provides good spur rejectio

A fully integrated 490-GHz receiver (RX) adopting a dual-locking receiver-based FLL (DL-RBFLL) is presented. The proposed RBFLL structure saves the power consumption by reusing the existing blocks in RX instead of the power-hungry blocks such as dividers and buffers operating at sub-THz. Contrary to the single-loop implementation, the dual-loop RBFLL, which consists of the coarse and fine locking loops, extends the locking range by six times with negligible additional power dissipation. In the R

Recently, the increasing rates of facial nerve preservation after vestibular schwannoma (VS) surgery have been achieved. However, the management of a partially or completely damaged facial nerve remains an important issue. The authors report a patient who was had a good recovery after a facial nerve reconstruction using fibrin glue-coated collagen fleece for a totally transected facial nerve during VS surgery. And, we verifed the anatomical preservation and functional outcome of the facial nerve

A 915 MHz binary frequency-shift keying (BFSK) transmitter (TX) for Internet-of-Things (IoT) applications is presented. The proposed TX adopts a passive frequency tripler, digital duty-cycle/phase calibration, and a low-cost on-chip power amplifier (PA) matching network (MN). The frequency tripler allows an ultralow-power (ULP) implementation of the frequency synthesizer by lowering the maximum operating frequency and relaxing the frequency tuning range requirement. The proposed frequency triple

A low-noise active leakage canceller (ALC) for radio frequency identification (RFID) transceiver is reported. The proposed ALC suppresses the strong transmitter (TX) leakage at the receiver (RX) input through continuous leakage tracking by employing an I/Q harmonic rejection switched-capacitor digital power amplifier (I/Q HR SC DPA). Compared to the analog feedback loop-based ALC, the proposed ALC minimizes the noise figure (NF) degradation in the RX and eliminates the large-size passive compone

Abstract A 500 GHz heterodyne imager adopting a source‐driven fourth subharmonic single balanced resistive mixer is implemented in 65‐nm CMOS technology. The adopted passive mixer improves the port‐to‐port isolation and minimizes the input matching loss. At an LO power of 5 dBm, the imager achieves a conversion loss and double sideband noise figure of 30.2 dB and 51 dB, respectively, which corresponds to −93 dBm and 15.8 fW/Hz 0.5 of sensitivity and the effective noise equivalent power, respecti