이봉재 교수

Daytime radiative coolers are used to pump excess heat from a target object into a cold exterior space without energy consumption. Radiative coolers have become attractive cooling options. In this study, a daytime radiative cooler was designed to have a selective emissive property of electromagnetic waves in the atmospheric transparency window of 8-13 μm and preserve low solar absorption for enhancing radiative cooling performance. The proposed daytime radiative cooler has a simple multilayer st

The present paper theoretically demonstrates coherent thermal emission in the infrared region by exciting magnetic polaritons between metallic gratings and an opaque metallic film, separated by a dielectric spacer. The coupling of the metallic strips and the film induces a magnetic response that is characterized by a negative permeability and positive permittivity. On the other hand, the metallic film intrinsically exhibits a negative permittivity and positive permeability in the near infrared.

The present study reports a novel concept of a direct solar thermal collector that harnesses the localized surface plasmon of metallic nanoparticles suspended in water. At the plasmon resonance frequency, the absorption and scattering from the nanoparticle can be greatly enhanced via the coupling of the incident radiation with the collective motion of electrons in metal. However, the surface plasmon induces strong absorption with a sharp peak due to its resonant nature, which is not desirable fo

Coherent thermal emission from surface relief gratings holds promise for spectral and directional control of thermal radiation but is limited to transverse magnetic waves, which can excite surface plasmon or phonon polaritons in the grating structure. We show in this letter that a coherent thermal source can be constructed with a thin polar material coated on a one-dimensional photonic crystal. The excitation of surface waves at the interface of the coated layer and the photonic crystal results

Several experiments have shown a huge enhancement in thermal radiation over the blackbody limit when two objects are separated by nanoscale gaps. Although those measurements only demonstrated enhanced radiation between homogeneous materials, theoretical studies now focus on controlling the near-field radiation by tuning surface polaritons supported in nanomaterials. Here, we experimentally demonstrate near-field thermal radiation between metallo-dielectric multilayers at nanoscale gaps. Signific

A large number of recent publications dealt with enhanced emission properties of micro/nanostructures by the excitation of surface plasmon or phonon polaritons. Some used grating structures to demonstrate coherent thermal emission in a narrow spectral band and towards a well-defined direction. Others suggested that planar layers could also be used to achieve coherent emission. In the present paper, we describe two alternative designs with fewer layers for the application as coherent emission sou

Polydimethylsiloxane (PDMS) is a prominent material for radiative cooling due to its promising optical properties in the mid-infrared spectral region as well as its fabrication easiness. Even though several works have reported that the mid-infrared emissivity of a PDMS film can be increased by surface modification, there is still room for further enhancement through global optimization. Here, we designed and fabricated the thin PDMS film patterned with two-dimensional gratings to obtain the high

In this work, a tandem grating solar absorber is proposed, which can be easily fabricated on a wafer scale and is thermally stable up to 800 K. The base of the solar thermal absorber consists of a tungsten substrate, SiO 2 spacer, and 2D tungsten nanohole array filled with SiO 2 . On top of the base structure, a 2D tungsten nanodisc array is coated with an additional SiO 2 spacer, forming the tandem grating structure. The outside area of the nanodisc array is also filled with SiO 2 ; thus, the p

Liquid metals are one of the most interesting and promising materials due to their electrical, fluidic, and thermophysical properties. With the aid of their exceptional deformable natures, liquid metals are now considered to be electrically conductive materials for sensors and actuators, major constituent transducers in soft robotics, that can experience and withstand significant levels of mechanical deformation. For the upcoming era of wearable electronics and soft robotics, we would like to of