김민구 교수

Integration of capacitive sensing capabilities to epidermal electronic systems (EES) can enhance the robustness in operation for electrophysiological signal measurement. Capacitive EES designs are reusable, electrically safe, and minimally sensitive to motion artifacts. Experiments on human subjects illustrate levels of fidelity in ECG, EMG, and EOG recordings comparable to those of standard gel electrodes and of direct contact EES electrodes.

Mechanically reinforced skin-electronics are presented by exploiting networked nanocomposite elastomers where high quality metal nanowires serve as conducting paths. Theoretical and experimental studies show that the established skin-electronics exhibit superior mechanical enhancements against crack and delamination phenomena. Device applications include a class of biomedical devices that offers the ability of thermotherapeutic stimulation and electrophysiological monitoring, all via the skin.

Successful rehabilitation of oropharyngeal swallowing disorders (i.e., dysphagia) requires frequent performance of head/neck exercises that primarily rely on expensive biofeedback devices, often only available in large medical centers. This directly affects treatment compliance and outcomes, and highlights the need to develop a portable and inexpensive remote monitoring system for the telerehabilitation of dysphagia. Here, we present the development and preliminarily validation of a skin-mountab

Abstract People with hand amputations experience strenuous daily life challenges, often leading to lifelong use of a prosthetic hand(s) and services. Modern advanced prosthetic hands must be able to provide human hand-like sensory perceptions to receive external stimuli during daily activities while simultaneously replicating a realistic appearance and physical properties to naturally integrate in social contexts; however, the practical realization of these issues are impeded by a lack of effect

Electroretinogram examinations serve as routine clinical procedures in ophthalmology for the diagnosis and management of many ocular diseases. However, the rigid form factor of current corneal sensors produces a mismatch with the soft, curvilinear, and exceptionally sensitive human cornea, which typically requires the use of topical anesthesia and a speculum for pain management and safety. Here we report a design of an all-printed stretchable corneal sensor built on commercially-available dispos

Transparent radiative cooling holds the promise to efficiently manage thermal conditions in various electronic devices without additional energy consumption. Radiative cooling cover windows designed for foldable and flexible displays could enhance cooling capacities in the ubiquitous deployment of flexible electronics in outdoor environments. However, previous demonstrations have not met the optical, mechanical, and moisture-impermeable criteria for such cover windows. Herein, we report transpar

Miniaturization of electronic components and advances in flexible and stretchable materials have stimulated the development of wearable health care systems that can reflect and monitor personal health status by health care professionals. New skin-mountable devices that offer seamless contact onto the human skin, even under large deformations by natural motions of the wearer, provide a route for both high-fidelity monitoring and patient-controlled therapy. This article provides an overview of sev

Transfer printing of thin-film nanoelectronics from their fabrication wafer commonly requires chemical etching on the sacrifice of wafer but is also limited by defects with a low yield. Here, we introduce a wafer-recyclable, environment-friendly transfer printing process that enables the wafer-scale separation of high-performance thin-film nanoelectronics from their fabrication wafer in a defect-free manner that enables multiple reuses of the wafer. The interfacial delamination is enabled throug

Vertically ordered arrays of silicon nanoneedles (Si NNs), due to their nanoscale dimension and low cytotoxicity, could enable minimally invasive nanoinjection of biomolecules into living biological systems such as cells and tissues. Although production of these Si NNs on a bulk Si wafer has been achieved through standard nanofabrication technology, there exists a large mismatch at the interface between the rigid, flat, and opaque Si wafer and soft, curvilinear, and optically transparent biologi

Electronics that are capable of destroying themselves, on demand and in a harmless way, might provide the ultimate form of data security. This paper presents materials and device architectures for triggered destruction of conventional microelectronic systems by means of microfluidic chemical etching of the constituent materials, including silicon, silicon dioxide, and metals (e.g., aluminum). Demonstrations in an array of home‐built metal‐oxide‐semiconductor field‐effect transistors that exploit

Electroactive polymer (EAP) is a polymer that reacts to electrical stimuli, such as voltage, and can be divided into electronic and ionic EAP by an electrical energy transfer mechanism within the polymer. The mechanism of ionic EAP is the movement of the positive ions inducing voltage change in the polymer membrane. Among the ionic EAPs, an ionic polymer-metal composite (IPMC) is composed of a metal electrode on the surface of the polymer membrane. A common material for the polymer membrane of I

"Living" cell sheets or bioelectronic chips have great potentials to improve the quality of diagnostics and therapies. However, handling these thin and delicate materials remains a grand challenge because the external force applied for gripping and releasing can easily deform or damage the materials. This study presents a soft manipulator that can manipulate and transport cell/tissue sheets and ultrathin wearable biosensing devices seamlessly by recapitulating how a cephalopod's suction cup work

Purpose Surface electromyography (sEMG) is often used for biofeedback during swallowing rehabilitation. However, commercially available sEMG electrodes are not optimized for the head and neck area, have rigid form, and are mostly available in large medical centers. We developed an ultrathin, soft, and flexible sEMG patch, specifically designed to conform to the submental anatomy and which will be ultimately incorporated into a telehealth system. To validate this first-generation sEMG patch, we c