최민재 교수
Minjae Choi
연세대학교 의학과 · 의학
연구실 소개
최민재 교수의 연구실은 주로 의료영상 및 생체신호 측정 기술, 특히 웨어러블 센서와 3D 센싱 기반의 정밀 의료 진단 및 재활 기술 개발에 초점을 맞추고 있습니다. 특히 피부세포에서의 단백질 발현 변화를 분석함으로써 정신질환의 생물학적 기전을 규명하고, 고정밀한 관절 각도 측정을 위한 안정성 높은 센서 기술을 개발하고 있습니다. 또한, 360도 정밀 3D 스캐닝 기술을 활용한 의료 영상 및 메타버스 응용 분야의 기술 기반 마련에도 기여하고 있습니다. 이와 같은 연구들은 정밀의료와 미래 의료 기술의 실현을 위한 핵심 기반을 마련하고 있습니다.
연구 현황
연구 성과 추이
표시된 성과는 수집된 데이터 기준으로 산출되며, 일부 차이가 있을 수 있습니다.
주요 논문
8Our data indicate that both the sera of BD patients with active disease and S. sanguis infection are inflammatory stimuli that can induce membranous hnRNP A2/B1 expression in HDMECs.
Accurate sensing of finger joint angles is a key objective in wearable motion sensing systems for rehabilitation applications and requires high sensing reliability and accuracy. However, conventional textile-based strain sensors often exhibit low reliability, characterized by baseline drift and the double-peak phenomenon during repetitive deformation. These limitations are mainly attributed to the length-variation-based sensing mechanism, in which repeated deformation induces changes in the sens
The demand for 360-degree 3D reconstruction has significantly increased in recent years across various domains such as the metaverse and 3D telecommunication. Accordingly, the importance of precise and wide-area 3D sensing technology has become emphasized. While the digital fringe projection method has been widely used due to its high accuracy and implementation flexibility, it suffers from fundamental limitations such as unidirectional projection and a restricted available light spectrum. To ad
Yong Jun Kwon, M.D., Seung A Byun, Ph.D., Seok Hoon Jeong, M.D., Ph.D., Dokyun Kim, M.D., Ph.D., Min Hyuk Choi, M.D., Ph.D., Eun Jeong Won, M.D., Ph.D., Tae Yeul Kim, M.D., Ph.D., Jeong Hwan Shin, M.D., Ph.D., Min Joong Jang, M.D., Ph.D., Min Ji Choi, Ph.D., Ga Yeong Lee, M.S., Soo Bin Lee, B.S., Soo Hyun Kim, M.D., Ph.D., and Jong Hee Shin, M.D., Ph.D.. Ann Lab Med -0001;0:. https://doi.org/10.3343/alm.2025.0524
Introduction Ensuring the reliability, standardization, and international comparability of antimicrobial resistance (AMR) surveillance data critically depends on the implementation of robust quality assurance frameworks. South Korea established the Korea Global Antimicrobial Resistance Surveillance System (Kor-GLASS), supported by a centralized quality control center (QCC). As Kor-GLASS transitioned from Phase II to Phase III, new bacterial species and antimicrobial agents were incorporated, und
대표 연구 분야
최민재 교수의 연구를 Nubint에서 더 깊이 살펴보세요
이 연구실의 논문을 앱에서 열어 AI와 함께 읽고, 핵심을 요약하고, 내 글에 인용하세요.