김민주 교수
Minju Kim
포항공과대학교 환경공학부 · 공학
연구실 소개
김민주 교수의 연구실은 주로 생체재료 및 의료용 3D 프린팅 기술을 기반으로 한 만성 골수염 치료 신소재 개발에 집중하고 있습니다. 특히 폴리-ε-카프로락톤/폴리라크티크-코-글리올릭산 기반 생분해성 스크랩을 활용해 약물 방출 기능을 갖춘 맞춤형 인체 조직 재생용 구조물을 설계하고 있습니다. 또한 고온·저온 환경에서의 열역학적 거동 분석 및 고체상태에서의 유동 특성 연구를 통해 의료 장치 및 실험 장비의 정밀 제어 기술도 함께 개발하고 있습니다. 특히 단백질 결정 자동 장착 시스템을 통한 고속 단백질 구조 분석 기술의 자동화도 연구 분야에 포함됩니다.
연구 현황
연구 성과 추이
표시된 성과는 수집된 데이터 기준으로 산출되며, 일부 차이가 있을 수 있습니다.
주요 논문
3Osteomyelitis, an infection and inflammation of bone marrow, often progresses to chronic stage because of delay in diagnosis and treatment. Once it becomes chronic, intravenous antibiotics therapy is no longer effective as swollen surrounding tissue interrupts blood flow into the infected tissue. In severe cases, debridement of the necrotic tissue becomes necessary to prevent further infection. In this study, for the first time, we produced three-dimensional (3D) printed antibiotics-loaded biode
An experimental study is performed to investigate the thermal and flow characteristics of subcooled liquid nitrogen in a natural circulation loop. A round tube with uniform diameter is fabricated into a circulation loop and vertically located in a cryostat, where a GM cryocooler is heat sink at the top and an electrical heater is heat source nearly at the bottom. Steady flow of subcooled liquid nitrogen in the loop is successfully obtained by setting the heating power at a given level. Temperatu
We are developing a robotic system for auto‐mounting protein crystals from a sample cassette in liquid nitrogen to a goniometer head. A small industrial six joint axis robot is adopted for this system with a custom built actuator. It will be installed at a wiggler protein crystallography beam‐line in Pohang Accelerator Laboratory. Our design goal is to make the system applied to every type of sample pins such as a screw or magnetic types of pins with 18mm length. The sample cassette is designed
대표 연구 분야
김민주 교수의 연구를 Nubint에서 더 깊이 살펴보세요
이 연구실의 논문을 앱에서 열어 AI와 함께 읽고, 핵심을 요약하고, 내 글에 인용하세요.