박상훈 교수

High quality graphene nanosheets were fabricated within 1 min by solid-state microwave irradiation of a mixture of graphite oxide and graphene nanosheets under a hydrogen atmosphere. The graphene nanosheets in the mixture acted as an effective microwave susceptor under microwave irradiation synthesis, and could provide sufficiently rapid heating for the effective exfoliation of graphite oxide. A hydrogen containing atmosphere played important roles in improving the quality of the graphene nanosh

In order to improve the efficiency of energy conversion for a photovoltaic (PV) system, a soft-switching boost converter using a simple auxiliary resonant circuit, which is composed of an auxiliary switch, a diode, a resonant inductor, and a resonant capacitor, is adopted in this paper. The conventional boost converter decreases the efficiency because of hard switching, which generates losses when the switches are turned on/off. During this interval, all switches in the adopted circuit perform z

High Resolution Image Download MS PowerPoint Slide To take full advantage of graphene in macroscale devices, it is important to integrate two-dimensional graphene nanosheets into a micro/macrosized structure that can fully utilize graphene’s nanoscale characteristics. To this end, we developed a novel spray-assisted self-assembly process to create a spherically integrated graphene microstructure (graphene microsphere) using a high-temperature organic solvent in a manner reminiscent of deep-fryin

A new soft-switching boost converter is proposed in this paper. The conventional boost converter generates switching losses at turn on and off, and this causes a reduction in the whole system's efficiency. The proposed boost converter utilizes a soft-switching method using an auxiliary circuit with a resonant inductor and capacitor, auxiliary switch, and diodes. Therefore, the proposed soft-switching boost converter reduces switching losses more than the conventional hard-switching converter. Th

Abstract Among other things, battery electrodes need to display large absolute capacities coupled with high rate performance. However, enhancing areal capacity, for example via increased electrode thickness, results in reductions in rate performance. The basis for this negative correlation has not been studied in a quantitative fashion. Here, a semiempirical model is used to analyze capacity versus rate data for electrodes fabricated from a number of materials, each measured at various thickness

NAND Flash-based Storage Devices (NFSDs) have been replacing the conventional magnetic storage devices in many consumer electronic systems. One of the advantages of NFSDs is their read/write bandwidth, which is higher than that of the magnetic storage devices. For further increase of their bandwidth, high-end NFSDs employ multichannel and multi-way architectures in which it is possible to access the NAND Flash Memories (NFMs) in parallel for amortizing the long latency of NFMs. Even though this

Recent studies on supercapacitors have focused on the development of hierarchical nanostructured carbons by combining two-dimensional graphene and other conductive sp(2) carbons, which differ in dimensionality, to improve their electrochemical performance. Herein, we report a strategy for synthesizing a hierarchical graphene-based carbon material, which we shall refer to as spine-like nanostructured carbon, from a one-dimensional graphitic carbon nanofiber by controlling the local graphene/graph

Both chicken liver NADP-malic enzyme and Ascaris suum NAD-malic enzyme catalyze the metal-dependent decarboxylation of oxalacetate. Both enzymes catalyze the reaction either in the presence or in the absence of dinucleotide. The presence of dinucleotide increases the affinity of oxalacetate for the chicken liver NADP-malic enzyme, but this information could not be obtained in the case of A. suum NAD-malic enzyme because of the low affinity of free enzyme for NAD. The kinetic mechanism for oxalac