이상설 교수
Sang-Sol Lee
포항공과대학교 신소재공학과 · 공학
연구실 소개
이상설 교수의 연구실은 주로 나노소재의 합성과 물성 제어를 중심으로, 특히 코발트 페라이트 나노입자 및 리튬이온 배터리의 정공 및 산화 상태 변화를 고해상도 동기산광 기반 분석 기법을 통해 연구하고 있습니다. 특히, 고에너지 X선 분광법과 회절 기법을 활용한 배터리 재료의 전기화학적 거동 분석을 통해 고성능 에너지 저장 소재의 개발 기반을 마련하고 있습니다. 또한, 3D 메시 처리 기술과 나노재료의 광학적·전자적 특성 분석을 융합한 다학제적 연구도 진행 중입니다.
연구 현황
연구 성과 추이
표시된 성과는 수집된 데이터 기준으로 산출되며, 일부 차이가 있을 수 있습니다.
주요 논문
15Feature detection is important in various mesh processing techniques, such as mesh editing, mesh morphing, mesh compression, and mesh signal processing. In spite of much research in computer vision, automatic feature detection even for images still remains a difficult problem. To avoid this difficulty, semi-automatic or interactive techniques for image feature detection have been investigated. In this paper, we propose a geometric snake as an interactive tool for feature detection on a 3D triang
Magnesium oxide remained interesting from long time for several important phenomena like; defect induced magnetism, spin electron reflectivity, broad laser emission etc. Moreover, nanostructures of this material exhibited suitability for different kinds of applications ranging from wastewater treatment to spintronics depending upon their shape and size. In this way, researchers had grown nanostructures in the form of nanoparticles, thin films, nanotubes, nanowalls, nanobelts. Though nanoparticle
Herein, the size dependent behavior of cobalt ferrite nanoparticles was investigated using synchrotron radiation based techniques.
Herein, we report the soft X-ray absorption spectroscopic investigation for Li(Ni0.8Co0.1Mn0.1)O2 cathode material during charging and discharging. These measurements were carried out at the Mn L-, Co L-, and Ni L-edges during various stages of charging and discharging. Both the Mn and Co L-edge spectroscopic measurements reflect the invariance in the oxidation states of Mn and Co ions. The Ni L-edge measurements show the modification of the oxidation state of Ni ions during the charging and dis
interference lithography with 250 nm pitch grating agreed well with the results calculated using the lumped parameter model. The experimental results demonstrated that the equipment and test protocol can be used for EUV material infrastructure evaluation in academia and in industry.
Li-ion rechargeable batteries are promising systems for large-scale energy storage solutions. Understanding the electrochemical process in the cathodes of these batteries using suitable techniques is one of the crucial steps for developing them as next-generation energy storage devices. Due to the broad energy range, synchrotron X-ray techniques provide a better option for characterizing the cathodes compared to the conventional laboratory-scale characterization instruments. This work gives an o
For spectral imaging of chemical distributions using X-ray absorption near-edge structure (XANES) spectra, a modified double-crystal monochromator, a focusing plane mirrors system and a newly developed fluorescence-type X-ray beam-position monitoring and feedback system have been implemented. This major hardware upgrade provides a sufficiently stable X-ray source during energy scanning of more than hundreds of eV for acquisition of reliable XANES spectra in two-dimensional and three-dimensional
Our study identifies that the first cycle IRC loss is strongly related to the irreversibility of the Ni charge state, which limits the capacity and energy density.
The mask shadowing effect is a unique phenomenon caused by a mirror-based mask structure and an oblique incident angle of light in the extreme ultraviolet lithography process. This results in a horizontal–vertical (H–V) bias, an ellipticity in the contact hole pattern and, eventually, a patterning limit and critical dimension (CD) nonuniformity. Reducing the absorber thickness is the most effective method to minimize the mask shadowing effect, but this can deteriorate the mask image contrast. In
This work depicts the recent progress towards utilizing several methods to grow Li7La3Zr2O12 (LLZO) thin film electrolytes of Li-rechargeable batteries. The composition, crystalline phase, and Li-ion conductivity of the electrolyte are affected by the pre and post synthesis processing and synthesis method. The properties of the target material used to deposit SSE thin films also affect the nature of electrolyte. Thus, this review article depicts the synthesis of bulk SSE and the various depositi
대표 연구 분야
이상설 교수의 연구를 Nubint에서 더 깊이 살펴보세요
이 연구실의 논문을 앱에서 열어 AI와 함께 읽고, 핵심을 요약하고, 내 글에 인용하세요.