이상준 교수

The flow characteristics in the stern and near-wake region of two ship models, the Korea Research Institute of Ships and Ocean Engineering (KRISO) 3,600 TEU containership (KCS) and the KRISO 300K very large crude oil carrier (VLCC) (KVLCC), were investigated experimentally. The double-deck ship models were installed in a subsonic wind tunnel. The freestream velocity was fixed at Uo = 25 m/s, and the corresponding Reynolds numbers based on the model length (Lpp) were about 3.3x 106 and 4.6x 106fo

Most microfluidic chips consist of several microchannels inside. In order to design microfluidic chips efficiently, it is important to predict the flow passage and to understand the flow characteristics on the chip. In this study, the flow structure inside microchannels has been investigated using a micro-PIV system. We focused on the flow resistance with respect to the inlet configuration of microchannels. The microchannels made of poly-dimethyl-siloxane (PDMS) material were fabricated by a mic

Three-dimensional (3D) flow structures of a turbulent jet issuing from a sharp-edged circular nozzle having multiple triangular tabs are experimentally studied by employing a stereoscopic-PIV (SPIV) system. Two different sharp-edged jet nozzles having 4 and 8 tabs are investigated at a jet Reynolds number of Re = 10,000. The SPIV measurements are carried out at 5 different cross-sectional planes along the jet direction. Spatial distributions of turbulent statistics including mean velocity, mean

The flow characteristics of chicken blood in a micro-tube with a 100 m diameter are investigated using a micro-Particle Image Velocimetry (PIV) technique. Chicken blood with 40% hematocrit is supplied into the micro-tube using a syringe pump. For comparison, the same experiments are repeated for human blood with 40% hematocrit. Chicken blood flow has a cell-free layer near the tube wall, and this layers thickness increases with the increased flow speed due to radial migration. As a hemorheologic

The purpose of this research was development of quantitative ultrasonic test methodology for detecting internal defects in members of ancient wooden building. Connection part between wooden members and/or contacted or hidden part by wall of ceiling or other construction materials make it hard to apply direct way of ultrasonic test. So indirect way of ultrasonic test needed to be applied. Test methodology with newly developed prototype of ultrasonic system was proposed. Homogeneous material with

The digital HPTV(holographic particle tracking velocimetry) velocity field measurement system consists of four steps: recording, numerical reconstruction, particle extraction and velocity extraction. In the velocity extraction process, we improved the two frame PTV algorithm to extract 3-D displacement information of each particle located in 3D space. Because a digital CCD camera was used, some factors such as spatial resolution, numerical aperture, and particle concentration influenced on the p

In the steel manufacturing area, researches for defect inspection receive a big attention for quality control. This paper proposes an algorithm to detect a scratch defect on steel billets. This algorithm takes ROIs (Regions of Interest), and extracts 11 features which represent properties of defect on a ROI. SVM (Support Vector Machine) is used to classify defect and normal ROIs. The algorithm classifies a frame image of a Billet as a defect image if there is one or more defect ROIs. In the expe