박성준 교수

To understand the underlying mechanisms of progressive neurophysiological phenomena, neural interfaces should interact bi-directionally with brain circuits over extended periods of time. However, such interfaces remain limited by the foreign body response that stems from the chemo-mechanical mismatch between the probes and the neural tissues. To address this challenge, we developed a multifunctional sensing and actuation platform consisting of multimaterial fibers intimately integrated within a

Abstract Over the past decade, conductive hydrogels have received great attention as tissue-interfacing electrodes due to their soft and tissue-like mechanical properties. However, a trade-off between robust tissue-like mechanical properties and good electrical properties has prevented the fabrication of a tough, highly conductive hydrogel and limited its use in bioelectronics. Here, we report a synthetic method for the realization of highly conductive and mechanically tough hydrogels with tissu

Lamellae-forming polystyrene-block-poly(methyl methacrylate) films were directed to assemble with perpendicularly oriented domains and long-range order in confining grooves (see figure), with preferential and neutral wetting in sidewalls and bottoms, respectively. The assembled films were highly amenable for pattern transfer by reactive-ion etching.

We have developed a model to predict the chemical reactivity of carbon nanotubes (CNTs) quantitatively from their initial structures. The parameters, universal for each reaction, of the model can be obtained from a graphene sheet analysis. The chemical reactivity of hydrogenation, hydroxylation, and fluorination were predicted within 0.1−0.3 eV errors, compared with first principle simulation results. The model also predicted the enhanced chemical reactivity of mechanically bent CNTs. The predic

Abstract 2D semiconductors, especially transition metal dichalcogenide (TMD) monolayers, are extensively studied for electronic and optoelectronic applications. Beyond intensive studies on single transistors and photodetectors, the recent advent of large‐area synthesis of these atomically thin layers has paved the way for 2D integrated circuits, such as digital logic circuits and image sensors, achieving an integration level of ≈100 devices thus far. Here, a decisive advance in 2D integrated cir

Flexible and stretchable optoelectronic devices can be potentially applied in displays, biosensors, biomedicine, robotics, and energy generation. The use of nanomaterials with superior optical properties such as quantum dots (QDs) is important in the realization of wearable displays and biomedical devices, but specific structural design as well as selection of materials should preferentially accompany this technology to realize stretchable forms of these devices. Here, we report stretchable opto

Liquid metal is being regarded as a promising material for soft electronics owing to its distinct combination of high electrical conductivity comparable to that of metals and exceptional deformability derived from its liquid state. However, the applicability of liquid metal is still limited due to the difficulty in simultaneously achieving its mechanical stability and initial conductivity. Furthermore, reliable and rapid patterning of stable liquid metal directly on various soft substrates at hi

Neurological and psychiatric conditions pose an increasing socioeconomic burden on our aging society. Our ability to understand and treat these conditions relies on the development of reliable tools to study the dynamics of the underlying neural circuits. Despite significant progress in approaches and devices to sense and modulate neural activity, further refinement is required on the spatiotemporal resolution, cell-type selectivity, and long-term stability of neural interfaces. Guided by the pr

Although triboelectrification is a well-known phenomenon, fundamental understanding of its principle on a material surface has not been studied systematically. Here, we demonstrated that the surface potential, especially the surface dipoles and surface electronic states, governed the triboelectrification by controlling the surface with various electron-donating and -withdrawing functional groups. The functional groups critically affected the surface dipoles and surface electronic states followed

Conventional electronic (e-) skins are a class of thin-film electronics mainly fabricated in laboratories or factories, which is incapable of rapid and simple customization for personalized healthcare. Here a new class of e-tattoos is introduced that can be directly implemented on the skin by facile one-step coating with various designs at multi-scale depending on the purpose of the user without a substrate. An e-tattoo is realized by attaching Pt-decorated carbon nanotubes on gallium-based liqu

Neural interfaces have enabled significant advancements in neuroscience and paved the way for clinical applications in the diagnosis, treatment, and prevention of neurological disorders. A variety of device modalities, such as electrical, chemical and optical neural interfacing, are required for the comprehensive monitoring and modulation of neural activity. The development of recent devices with multimodal functionalities has been driven by innovations in materials engineering, especially the u

Due to the limited regenerative ability of neural tissue, a diverse set of biochemical and biophysical cues for increasing nerve growth has been investigated, including neurotrophic factors, topography, and electrical stimulation. In this report, we explore optogenetic control of neurite growth as a cell-specific alternative to electrical stimulation. By investigating a broad range of optical stimulation parameters on dorsal root ganglia (DRGs) expressing channelrhodopsin 2 (ChR2), we identified

Deformable semi-solid liquid metal particles (LMP) have emerged as a promising substitute for rigid conductive fillers due to their excellent electrical properties and stable conductance under strain. However, achieving a compact and robust coating of LMP on fibers remains a persistent challenge, mainly due to the incompatibility of conventional coating techniques with LMP. Additionally, the limited durability and absence of initial electrical conductivity of LMP restrict their widespread applic