Skip to main content

백승욱 교수

Seung Wook Baek

KAIST 항공우주공학과 · 공학

연구실 소개

백승욱 교수의 연구실은 열복사 및 연소 열역학 분야에서 응용된 수치 해석 기법과 고체 연료 및 젤 연료의 열화학적 거동을 중심으로 연구를 진행하고 있습니다. 특히 3차원 비직교 격자에서의 복사열전달 해법 개발과 함께, 축대칭 구조 내에서의 복사열전달 해석, 젤 연료의 점성 및 유변학적 거동 분석을 통해 항공우주 분야의 고성능 추진 시스템 개발에 기여하고 있습니다. 또한 에탄올아민 기반 젤 시스템의 제조 및 물성 제어를 통해 환경 친화적인 추진제 개발에도 기여하고 있습니다.

복사열전달젤 연료유변학적 거동수치 해법항공우주 추진

연구 현황

논문 수
267
총 인용 수
4,304
최근 5년 논문
8
주요 분야
공학

연구 성과 추이

표시된 성과는 수집된 데이터 기준으로 산출되며, 일부 차이가 있을 수 있습니다.

5개년 연도별 논문 게재 수
8총합
2020
2021
2022
2024
2025
5개년 연도별 피인용 수
35총합
20202021202220242025

주요 논문

15
1
논문|인용수 232·2003
Numerical study on supersonic combustion with cavity-based fuel injection
Kyung Moo Kim, Seung Wook Baek, Cho Young Han
SJR Q1International Journal of Heat and Mass Transfer
Computational MechanicsEngineering
2
논문|인용수 122·2014
Autoignition and combustion characteristics of heptane droplets with the addition of aluminium nanoparticles at elevated temperatures
Irfan Javed, Seung Wook Baek, Khalid Waheed
SJR Q1Combustion and Flame
Atmospheric ScienceEarth and Planetary Sciences
3
논문|인용수 117·2013
Effects of dense concentrations of aluminum nanoparticles on the evaporation behavior of kerosene droplet at elevated temperatures: The phenomenon of microexplosion
Irfan Javed, Seung Wook Baek, Khalid Waheed
SJR Q1Experimental Thermal and Fluid Science
Electrical and Electronic EngineeringEngineering
4
논문|인용수 117·2013
Evaporation characteristics of kerosene droplets with dilute concentrations of ligand-protected aluminum nanoparticles at elevated temperatures
Irfan Javed, Seung Wook Baek, Khalid Waheed, Ghafar Ali, Sung Oh Cho
SJR Q1Combustion and Flame
Computational MechanicsEngineering
5
논문|인용수 99·2014
Autoignition and combustion characteristics of kerosene droplets with dilute concentrations of aluminum nanoparticles at elevated temperatures
Irfan Javed, Seung Wook Baek, Khalid Waheed
SJR Q1Combustion and Flame
Computational MechanicsEngineering
6
논문|인용수 81·2003
Estimation of emissivities in a two-dimensional irregular geometry by inverse radiation analysis using hybrid genetic algorithm
Ki Wan Kim, Seung Wook Baek, Man Young Kim, Hong Sun Ryou
SJR Q1Journal of Quantitative Spectroscopy and Radiative Transfer
Computational MechanicsEngineering
7
논문|인용수 75·1998
NONORTHOGONAL FINITE-VOLUME SOLUTIONS OF RADIATIVE HEAT TRANSFER IN A THREE-DIMENSIONAL ENCLOSURE
Seung Wook Baek, Man Young Kim, Jeong Soo Kim
SJR Q3Numerical Heat Transfer Part B Fundamentals

Abstract A finite-volume solution procedure for radiative heat transfer in a three-dimensional nonorthogonal enclosure containing participating medium is proposed with geometric relations commonly adopted in computational fluid dynamics. A general discretization equation is formulated by using the directional weight and the step scheme for spatial differencing. The present approach is validated through comparison with the problems of hexahedral enclosure, annular sector, and three-dimensional co

Computational MechanicsEngineering
8
논문|인용수 70·2000
An extension of the weighted sum of gray gases non-gray gas radiation model to a two phase mixture of non-gray gas with particles
Myoung Jong Yu, Seung Wook Baek, Jae Hyun Park
SJR Q1International Journal of Heat and Mass Transfer
Computational MechanicsEngineering
9
논문|인용수 58·2016
Ignition characteristics of kerosene droplets with the addition of aluminum nanoparticles at elevated temperature and pressure
Dong Min Kim, Seung Wook Baek, Jisu Yoon
SJR Q1Combustion and Flame
Computational MechanicsEngineering
10
논문|인용수 54·2000
The combined Monte-Carlo and finite-volume method for radiation in a two-dimensional irregular geometry
Seung Wook Baek, Do‐Young Byun, Shin Jae Kang
SJR Q1International Journal of Heat and Mass Transfer
Computational MechanicsEngineering
11
논문|인용수 49·1997
MODIFICATION OF THE DISCRETE-ORDINATES METHOD IN AN AXISYMMETRIC CYLINDRICAL GEOMETRY
Seung Wook Baek, Man Young Kim
SJR Q3Numerical Heat Transfer Part B Fundamentals

The conventional discrete-ordinates method is modified and developed for the analysis of two-dimensional axisymmetric cylindrical enclosure with absorbing, emitting, and either isotropiclly or anisotropically scattering gray medium. The main characteristic of the present method Is that the control angles can be arbitrarily specified pertaining to each problem dealt with. The scattering phase Junction is approximated by a finite series of Legendre polynomials. In order to validate the formulation

Computational MechanicsEngineering
12
논문|인용수 47·1999
Microexplosion of aluminum slurry droplets
Do‐Young Byun, Seung Wook Baek, Ju Hyeong Cho
SJR Q1International Journal of Heat and Mass Transfer
Aerospace EngineeringEngineering
13
논문|인용수 47·1997
Analysis of radiative heating of a rocket plume base with the finite-volume method
Seung Wook Baek, Man Young Kim
SJR Q1International Journal of Heat and Mass Transfer
Computational MechanicsEngineering
14
논문|인용수 39·2016
Combustion of a single emulsion fuel droplet in a rapid compression machine
Hyemin Kim, Seung Wook Baek
SJR Q1Energy
Computational MechanicsEngineering
15
논문|인용수 37·2003
Interaction of a moving shock wave with a two-phase reacting medium
Jun Sung Park, Seung Wook Baek
SJR Q1International Journal of Heat and Mass Transfer
Computational MechanicsEngineering

대표 연구 분야

Computational MechanicsAerospace EngineeringElectrical and Electronic EngineeringFluid Flow and Transfer ProcessesSociology and Political ScienceMaterials Chemistry

백승욱 교수의 연구를 Nubint에서 더 깊이 살펴보세요

이 연구실의 논문을 앱에서 열어 AI와 함께 읽고, 핵심을 요약하고, 내 글에 인용하세요.