이승복 교수

An adequate window system is one of the most important retrofit strategies for effective energy conservation of a building, because the U-value and solar heat gain coefficient of windows have enormous impact on the heating and cooling loads of buildings. Therefore, this paper presents methods for improving the energy efficiency of existing residences that have various window sizes and envelope insulations, through a window retrofit using optimal U-value and solar heat gain coefficient values. Fu

Construction noise and vibration in urban areas are environmental impacts that cause damage to humans. A model for predicting the environmental costs of construction noise and vibration was developed in this study. The model uses noise- and vibration-level data of construction equipment to predict the construction noise and vibration levels and estimates the environmental costs based on the predicted noise and vibration levels. Monte Carlo simulation was used to develop the model, considering th

Phase change materials (PCMs) absorb or release a large amount of heat when changing phase from solid to liquid or vice versa. When this characteristic of PCM is utilized, it can be employed effectively for energy conversation in buildings. To apply PCM to buildings, the thermal characteristics of PCM must be considered, such as the melting temperature and temperature range of the phase changes. In addition, the characteristics of the heating and cooling system, which influence the cycle of PCM

Heating, ventilation, and air-conditioning (HVAC) systems usually have a set-point temperature control feature that uses the indoor dry-bulb temperature to control the indoor environment. However, an incorrect set-point temperature can reduce thermal comfort and result in unnecessary energy consumption. This study focuses on a derivation method for the optimal cooling set-point temperature of an HVAC system used in office buildings, considering the thermal characteristics and daily changes in th

AbstrctThis study is aimed at analyzing the impact of effective shading design for office buildings. For shade design, the overheated period for the area in which a target building was located was estimated, the building was configured to be shaded during this period, and a different shading design was applied for each direction. Using this shade design, the daylighting performance and the reduction in cooling loads during the overheated period were evaluated. The daylighting performance was eva

Light-emitting diode (LED) lighting should be considered for lighting efficiency enhancement, however, waste heat from light-emitting diode (LED) lighting increases the internal cooling load during the summer season. In order to solve this problem we propose a thermal management system for light-emitting diode (LED) lighting with a heat exchanger module integrated with the building’s heating, ventilation, and air conditioning (HVAC) system to move the lighting’s waste heat outdoors. An experimen

Humans spend approximately 90% of the daytime in buildings, and greenhouse gases (GHGs) emitted by buildings account for approximately 20% of total GHG emissions. As the energy consumed during building operation from a building life-cycle perspective amounts to approximately 70–90% of the total energy, it is essential to accurately predict the energy consumption of buildings for their efficient operation. This study aims to optimize a model for predicting the thermal energy consumption of buildi

Although the latest energy-efficient buildings use a large number of sensors and measuring instruments to predict consumption more accurately, it is generally not possible to identify which data are the most valuable or key for analysis among the tens of thousands of data points. This study selected the electric energy as a subset of total building energy consumption because it accounts for more than 65% of the total building energy consumption, and identified the variables that contribute to el

Cooling load in highly glazed residential building can be excessively large due to uncontrolled solar energy entering the indoor space. This study focuses on the cooling load reduction and changes in the daylighting properties via the application of a double window system (DWS) with shading with various surface reflectivities in highly glazed residential buildings. Evaluation of thermal and daylighting performances is carried out using simulation tools. The reductions in cooling load and energy

We investigated the synergetic effect between light-emitting diode (LED) lighting efficiency and building energy savings in heating and cooling using an alternative thermal operating system (ATOS) of indoor LED lighting integrated with the ventilation system of a building as an active cooling device. The heat generated from LED lighting and the indoor lighting illuminance were experimentally determined. The indoor heat gains in cooling and heating periods were determined using measurement data;