임성갑 교수

Systematic variation in the electrical conductivity of poly(3,4-ethylenedioxythiophene) (PEDOT) was achieved by oxidative chemical vapor deposition (oCVD). For oCVD, both the oxidant, Fe(III)Cl 3, and 3,4-ethylenedioxythiophene (EDOT) monomer are introduced in the vapor phase. A heated crucible allows for sublimation of the oxidant directly into the reactor chamber operating at 150 mTorr. Spontaneous reaction of the oxidant with the monomer introduced though a feedback-controlled mass flow syste

Abstract The stability of a perovskite solar cell (PSC) is enhanced significantly by applying a customized thin‐film encapsulation (TFE). The TFE is composed of a multilayer stack of organic/inorganic layers deposited by initiated chemical vapor deposition and atomic layer deposition, respectively, whose water vapor transmission rate is on the order of 10 −4 g m −2 d −1 at an accelerated condition of 38 °C and 90% relative humidity (RH). The TFE is optimized, taking into consideration various as

> 1.9) polymers directly from elemental sulfur. The deposition process involved vapor-phase radical polymerization between elemental sulfur and vinyl monomers to provide polymer films with controlled thickness and sulfur content, along with the refractive index as high as 1.91. Notably, the HRIP thin film showed unprecedented optical transparency throughout the visible range, attributed to the absence of long polysulfide segments within the polymer, which will serve as a key component in a wide

Various biophysical and biochemical factors are important for determining the fate of neural stem cells (NSCs). Among biophysical signals, topographical stimulation by micro/nanopatterns has been applied to control NSC differentiation. In this study, we developed a hierarchically patterned substrate (HPS) platform that can synergistically enhance the differentiation of human NSCs (hNSCs) by simultaneously providing microscale and nanoscale spatial controls to facilitate the alignment of the cyto

Advances in device technology have been accompanied by the development of new types of materials and device fabrication methods. Considering device design, initiated chemical vapor deposition (iCVD) inspires innovation as a platform technology that extends the application range of a material or device. iCVD serves as a versatile tool for surface modification using functional thin film. The building of polymeric thin films from vapor phase monomers is highly desirable for the surface modification

A robust superhydrophobic fabric was achieved by depositing a stacked polymer film composed of a poly(1,3,5,7-tetravinyl-1,3,5,7-tetramethylcyclotetrasiloxane) (p(V4D4)) layer and a poly(1H,1H,2H,2H-perfluorodecylacrylate) (p(PFDA)) layer. The polymer film was deposited by initiated chemical vapor deposition (iCVD), a solventless process that allows conformal coating of the stacked polymer film on various micro-structured substrates. The two polymeric layers most likely formed a covalent bonding

Novel nanoporous poly(3,4-ethylenedioxythiophene) (PEDOT) films with basalt-like surface morphology are successfully obtained via a one-step, vapor phase process of oxidative chemical vapor deposition (oCVD) by introducing a new oxidant, CuCl(2). The substrate temperature of the oCVD process is a crucial process parameter for controlling electrical conductivity and conjugation length. Moreover, the surface morphology is also systemically tunable through variations in substrate temperature, a uni

Conductive polymer chains were directly grafted on a variety of organic substrates containing aromatic functionalities. In this one-step mechanism, the covalent linkages between the substrates and the conducting polymers are created. The enhanced adhesion by grafting enables high-resolution patterning (down to 60 nm) of grafted PEDOT films using standard lithographic techniques without any modification of the patterning processes.

A novel high-strength nano-adhesive is demonstrated for fabricating nano- and microfluidic devices. While the traditional plasma sealing methods are specific for sealing glass to poly(dimethylsiloxane) (PDMS), the new method is compatible with a wide variety of polymeric and inorganic materials, including flexible substrates. Additionally, the traditional method requires that sealing occur within minutes after the plasma treatment. In contrast, the individual parts treated with the nano-adhesive

Biophysical cues, such as topography, and electrical cues can provide external stimulation for the promotion of stem cell neurogenesis. Here, we demonstrate an electroconductive surface nanotopography for enhancing neuronal differentiation and the functional maturation of human neural stem cells (hNSCs). The electroconductive nanopatterned substrates were prepared by depositing a thin layer of titanium (Ti) with nanograting topographies (150 to 300 nm groove/ridge, the thickness of the groove -

Electrically conductive materials provide a suitable platform for the in vitro study of excitable cells, such as skeletal muscle cells, due to their inherent conductivity and electroactivity. Here it is demonstrated that bioinspired electroconductive nanopatterned substrates enhance myogenic differentiation and maturation. The topographical cues from the highly aligned collagen bundles that form the extracellular matrix of skeletal muscle tissue are mimicked using nanopatterns created with capil

simple method to fabricate a multifunctional patterned platform on the nanometer scale is demonstrated. The platform contains two reactive functional groups on the surface: one is an acetylene group which can be functionalized via click chemistry, and the other is an amine group which can also be functionalized by classic carbodiimide chemistry with N-hydroxysuccinimide (NHS). The click-active and amine surface could be obtained from polymer coating of poly(propargyl methacrylate) (PPMA) via ini