유승협 교수

We have fabricated an efficient organic photovoltaic cell based on a heterojunction of pentacene and C60. Photocurrent action spectra exhibit broad light-harvesting throughout the visible spectrum with a peak external quantum efficiency (EQE) of 58±4% at short-circuit condition. Modeling studies indicate that this high EQE can be partly attributed to the large exciton diffusion length in the pentacene film as well as efficient dissociation of excitons at the pentacene/C60 heterojunction.

Organic light-emitting diodes (OLEDs) are established as a mainstream light source for display applications and can now be found in a plethora of consumer electronic devices used daily. This success can be attributed to the rich luminescent properties of organic materials, but efficiency enhancement made over the last few decades has also played a significant role in making OLEDs a practically viable technology. This report summarizes the efforts made so far to improve the external quantum effic

Pulse oximetry sensors have been playing a key role as devices to monitor elemental yet critical human health states. Conventional pulse oximetry sensors, however, have relatively large power consumption, impeding their use as stand-alone, continuous monitoring systems that can easily be integrated with everyday life. Here, we exploit the design freedom offered by organic technologies to realize a reflective patch-type pulse oximetry sensor with ultralow power consumption. On the basis of flexib

Doping improves performance. N- or B-doped carbon nanotubes (CNTs) uniformly dispersed in the active layer of P3HT/PCMB (poly (3-hexylthiophene/[6,6]-phenyl-C61-butyric acid methyl ester) bulk-heterojunction solar cells selectively enhance electron or hole transport and eventually help carrier collection. Specifically, the incorporation of 1.0 wt% B-doped CNTs results in balanced electron and hole transport and accomplishes a power conversion efficiency improvement from 3.0% (without CNTs) to 4.

Graphene quantum dot (GQD) light-emitting diodes (GQD-LEDs) are shown to have an electroluminescence exceeding 1000 cd m-2. These devices are possible due to a novel synthesis method to create GQDs with minimal oxidation, guaranteeing high quantum yields via the solvothermal formation of graphite intercalation compounds between graphite powder and sodium potassium tartrate. The GQDs are incorporated into polymeric host layers in a multilayer device and irradiate blue (~400 nm) emission. With str

We present studies of the current–voltage characteristics of organic solar cells based on heterojunctions of pentacene and C60 as a function of illumination intensity. The photovoltaic response at a given illumination level is parameterized and modeled using the equivalent circuit model developed for inorganic pn-junction solar cells. Reduction in shunt resistance and increase in diode reverse saturation current density are observed upon increase of the light intensity. We demonstrate that this

Graphene-based organic light-emitting diodes (OLEDs) have recently emerged as a key element essential in next-generation displays and lighting, mainly due to their promise for highly flexible light sources. However, their efficiency has been, at best, similar to that of conventional, indium tin oxide-based counterparts. We here propose an ideal electrode structure based on a synergetic interplay of high-index TiO2 layers and low-index hole-injection layers sandwiching graphene electrodes, which

Abstract Long‐lived afterglow emissions, such as room‐temperature phosphorescence (RTP) and thermally activated delayed fluorescence (TADF), are beneficial in the fields of displays, bioimaging, and data security. However, it is challenging to realize a single material that simultaneously exhibits both RTP and TADF properties with their relative strengths varied in a controlled manner. Herein, a new design approach is reported to control singlet–triplet energy splitting (∆ E ST ) in graphene qua

A highly conductive polymer layer coated on a microstructured indium tin oxide (ITO) electrode is proposed as a simple way to enhance outcoupling in organic light-emitting diodes. The relatively low refractive index of the conductive polymer provides an index contrast between the organic and ITO layers so that structuring of ITO electrodes can result in a significant optical effect.

A synthetic approach to highly efficient thermally activated delayed fluorescence (TADF) is proposed that uses ortho donor (D)–acceptor (A) compounds (PXZ o B, DPA o B, and Cz o B), wherein the acceptor is based on triarylboron and the donor is phenoxazine (PXZ), diphenylamine (DPA), or carbazole (Cz). Combined with the ortho D–A connectivity, the bulky nature of the triarylboron endows the D–A dyads with inherent steric “locking” for a highly twisted arrangement, leading to a small energy diffe

High efficiency is important for successful deployment of any light sources. Continued efforts have recently made it possible to demonstrate organic light-emitting diodes with efficiency comparable to that of inorganic light-emitting diodes. However, such achievements were possible only with the help of a macroscopic lens or complex internal nanostructures, both of which undermine the key benefits of organic light-emitting diodes as an affordable planar light source. Here we present a systematic